
1 / 3 · Click to enlarge
AI Summary
The MakerBase MKS SKIPR is a 7-axis 3D printer controller board that runs Klipper firmware using an integrated RK3328 SoC and STM32F407 MCU. It offers Ethernet, HDMI, USB, and TF/EMMC boot in a compact 160 × 100 mm board.
Key Highlights
- Integrated RK3328 SoC runs Klipper host, STM32F407 MCU controls machine actions
- 7-axis stepper drive supports most 3D printer configurations
- 1 GB DDR3 memory, HDMI and PI-TS35 display interfaces, wired Ethernet
- Three USB ports for mainboard, wireless adapter, camera, or storage
- Boot from TF card or EMMC module with included burning tools support
- Three independent MP1584PEN DC/DC modules for stable board power
Ideal For
- 3D printer enthusiasts building a Klipper-based machine
- Makers upgrading to a 7-axis controller with integrated host
- Users needing Ethernet and USB connectivity on a printer board
- Multi-extruder or multi-axis 3D printer projects
- DIYers who prefer TF or EMMC boot over a separate Raspberry Pi
Buying Tip
Confirm that your stepper motors and wiring match the board's 7-axis layout and that you have a 12–24 VDC power supply, as neither is included.
Elecvora expert review
Our verdict
The MKS SKIPR integrates a Klipper host and a capable 32-bit controller on one board, reducing wiring and cost for Klipper builds. It is a practical choice for users who want Ethernet and USB connectivity without a separate single-board computer.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Integrated RK3328 SoC eliminates the need for a separate Raspberry Pi
- 7-axis stepper support covers most printer configurations
- Rich I/O including HDMI, Ethernet, and three USB ports
- Three independent DC/DC modules for stable power delivery
Cons
- Requires a separate 12–24 VDC power supply
- No stepper drivers included; must be purchased separately
- Klipper configuration requires prior experience
Best for
Klipper users building or upgrading a 3D printer who want an all-in-one controller board.
Not ideal for
Beginners who prefer plug-and-play Marlin boards with pre-installed firmware.
Specifications
| Item Type | Controller Board |
|---|---|
| Compatibility | General Purpose |
| Input Voltage (VDC) | 12–24 |
| Operating Frequency (MHz) | 168 |
| Length (mm) | 160 |
| Width (mm) | 100 |
| Weight (g) | 158 |
| Shipping Weight | 0.193 kg |
| Shipping Dimensions | 22.5 × 14.5 × 2 cm |
What's in the box
- 1 × MakerBase MKS SKIPR board
- 1 × USB Type-C cable
Frequently Asked Questions
What firmware does the MKS SKIPR run?
Can I use the board without a Raspberry Pi?
What input voltage does the board require?
How do I boot the operating system?
What is included in the package?
Does the board support a display?
Overview
The MakerBase MKS SKIPR is an integrated seven-axis motherboard designed for running Klipper firmware on 3D printers. It combines the host computer and machine controller into a single board: a Rockchip RK3328 quad-core Cortex-A53 SoC runs the Klipper host on Armbian, while an STM32F407VET6 Cortex-M4 MCU at 168 MHz executes precise machine actions. This architecture simplifies wiring and reduces the need for external single-board computers.
Key Features
- Dual-processor design: RK3328 SoC for Klipper host and STM32F407 MCU for real-time control.
- 7-axis stepper drive: Supports a wide range of 3D printer kinematics and multi-extruder setups.
- Rich connectivity: HDMI screen interface, PI-TS35 screen interface, wired Ethernet, and three USB ports for mainboards, wireless adapters, cameras, keyboards, or storage.
- Flexible boot options: Start the system from a TF card or an EMMC module; EMMC offers faster, more stable read/write performance.
- Robust power design: Three independent MP1584PEN DC/DC modules ensure stable operation across the board.
- Fan and output control: Three controllable fan outputs plus three normally open outputs, each selectable between VIN, 12 V, or 5 V.
- Protection circuits: Schottky diode protection for MOS and temperature measurement circuits, back EMF energy absorption for stepper drivers, and independent voltage selection on the Z+ interface for different probe types.
Specifications Explained
Input voltage 12–24 VDC: The board accepts a wide range of common 3D printer power supplies, giving flexibility when matching an existing PSU.
168 MHz operating frequency: The STM32F407 MCU runs at 168 MHz, providing ample processing headroom for fast, accurate motion control.
Compact dimensions: At 160 mm × 100 mm and 158 g, the board fits easily into standard printer electronics enclosures while leaving room for wiring.
1 GB DDR3 memory: Supports the Klipper host environment and connected peripherals without memory bottlenecks.
Compatibility and Requirements
The MKS SKIPR is intended for general-purpose 3D printer use and is specifically designed to run Klipper firmware. It requires a 12–24 VDC power supply (not included) and a TF card or EMMC module for the operating system. A host computer is not needed because the RK3328 SoC runs the Klipper host directly. Display options include HDMI screens and the PI-TS35 screen interface. Network connectivity is provided via the wired Ethernet port.
Typical Uses
- Building a Klipper-based 3D printer with integrated host and controller.
- Upgrading an existing printer to a 7-axis controller board.
- Multi-extruder or multi-axis 3D printer projects.
- Applications requiring Ethernet, USB camera, or HDMI display connectivity.
What's in the Box
- 1 × MakerBase MKS SKIPR board
- 1 × USB Type-C cable

Quick specs
- Item Type
- Controller Board
- Compatibility
- General Purpose
- Input Voltage (VDC)
- 12–24
- Operating Frequency (MHz)
- 168
- Length (mm)
- 160
- Width (mm)
- 100



















