
1 / 7 · Click to enlarge
AI Summary
A compact MAX7219 driver module that controls 8-digit 7-segment LED displays over a four-wire serial interface. It handles multiplexing, brightness and data storage on-chip, so your microcontroller only sends the values to show.
Key Highlights
- Four-wire serial interface connects to common microcontrollers
- Drives 8-digit 7-segment displays, bar graphs or 64 LEDs
- On-chip data storage and brightness control
- 10 MHz serial interface for fast updates
- Compact 83 x 15 mm board weighing about 20 g
- Wide -40 to +85 °C operating temperature range
Ideal For
- Electronics hobbyists building numeric LED readouts
- Students learning serial display control
- Makers prototyping counters and timers
- Small instrument and test equipment builders
- Anyone driving 7-segment displays from a microcontroller
Buying Tip
Confirm whether your kit includes the 7-segment display itself, since this listing covers the driver module and package contents are not specified.
Elecvora expert review
Our verdict
A practical, well-established driver module for anyone who needs an 8-digit numeric readout without writing low-level multiplexing code. The four-wire interface and on-chip memory keep projects simple, though you should confirm the included parts and power budget before buying.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Simple four-wire serial connection
- Handles multiplexing and brightness in hardware
- Individual digit updates without full rewrites
- Compact 83 x 15 mm board
Cons
- Package contents are not specified
- IC variant may be MAXIM MAX7219 or GC7219
- Requires a suitable 5V supply for the 330 mA draw
Best for
Makers and students building numeric LED readouts
Not ideal for
Projects needing a fully assembled display with confirmed accessories
Specifications
| Weight (g) | 20 |
|---|---|
| Operating Current (mA) | 330 |
| Operating Temperature (°C) | -40 ~ +85 |
| Serial Interfaces | 10MHz |
| Length (mm) | 83 |
| Width (mm) | 15 |
| Shipping Weight | 0.022 kg |
| Shipping Dimensions | 10 × 5 × 3 cm |
Frequently Asked Questions
What does this module actually control?
Which microcontrollers can I use with it?
What voltage does it need?
Which IC will I receive?
Is the LED display included?
How should I care for the module?
Overview
The MAX7219 Digital Tube Display Module is a driver board built around the MAX7219 display controller. It sits between your microcontroller and an 8-digit 7-segment LED display, taking care of multiplexing, digit driving and brightness so your code stays simple. Data is sent over a four-wire serial interface, and each digit can be updated individually without rewriting the whole display.
The board measures 83 mm by 15 mm and weighs roughly 20 g, making it easy to mount in compact enclosures, panels and prototype setups. It is aimed at makers, students and electronics hobbyists who need clear numeric readouts without building a display driver from scratch.
Key Features
- Four-wire serial control: connect VCC, GND, DIN, CLK and CS to your microcontroller and start sending data.
- On-chip memory: the controller stores display data so you only update the digits that change.
- Brightness control: adjust LED intensity in software to suit indoor or outdoor viewing.
- Flexible output: drive an 8-digit 7-segment display, a bar graph or up to 64 separate LEDs.
- Fast interface: the 10 MHz serial interface keeps updates responsive.
Specifications Explained
Operating current of 330 mA tells you the module draws a moderate amount of current when driving a display, so plan your power supply accordingly.
10 MHz serial interface means data can be clocked in quickly, which helps when you refresh several digits or animate a display.
-40 to +85 °C operating temperature covers typical indoor and sheltered outdoor environments, from cold workshops to warm enclosures.
83 x 15 mm size and 20 g weight make the board slim enough for panel cutouts and lightweight enough for small projects.
Compatibility and Requirements
The module uses a four-wire serial interface that connects to common microcontrollers and microprocessors. Wiring guidance lists VCC to 5V, GND to GND, DIN to P00, CLK to P02 and CS to P01, so check your board's pin mapping before connecting. The product ships with either a MAXIM MAX7219 or GC7219 IC depending on availability, and both variants are supplied at random.
Typical Uses
- Numeric readouts for counters, timers and scoreboards
- Prototype instruments and test equipment
- Bar graph or LED array projects
- Learning projects for serial display control
What's in the Box
Package contents are not specified for this listing. Confirm the included items with the seller before ordering if you need a display or cables.
Quick specs
- Weight (g)
- 20
- Operating Current (mA)
- 330
- Operating Temperature (°C)
- -40 ~ +85
- Serial Interfaces
- 10MHz
- Length (mm)
- 83
- Width (mm)
- 15

















