Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Micsig ATO1004 is a 100 MHz, 4-channel automotive oscilloscope with a 10.1-inch touchscreen and SigtestUI. Its 7500 mAh battery and 32 GB storage let you capture and analyse vehicle signals anywhere.

Key Highlights

  • 100 MHz bandwidth and 4 analog channels for detailed signal capture
  • 10.1-inch capacitive touchscreen with 1280x800 resolution
  • SigtestUI multitasking system for intuitive, smartphone-like operation
  • 7500 mAh lithium battery provides over 5 hours of continuous use
  • Serial bus decoding for CAN, CAN FD, LIN, UART, SPI, and I²C
  • 32 GB built-in storage for waveforms, screenshots, and video recordings

Ideal For

  • Automotive mechanics diagnosing ECU and sensor faults
  • Auto electricians working on CAN and LIN bus systems
  • Engineers developing and testing vehicle electronics
  • Technicians servicing electric and hybrid vehicles
  • Workshops needing a portable, battery-powered oscilloscope

Buying Tip

Confirm that the included probes and leads match the types of connectors on the vehicles you service, and consider additional probes if you need to back-probe delicate terminals.

Elecvora expert review

Our verdict

The Micsig ATO1004 is a well-equipped automotive oscilloscope that balances portability with professional features. Its large touchscreen and long battery life make it a practical choice for technicians who need to work in the field or around the workshop.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Four channels and 100 MHz bandwidth handle a wide range of automotive signals
  • Intuitive touchscreen interface reduces learning curve
  • Over five hours of battery life for cordless operation
  • Built-in decoding for major serial buses
  • Large 32 GB storage for extensive data logging

Cons

  • No built-in signal generator (not specified)
  • Probes and accessories may need supplementation for certain connectors
  • Weight of 1746 g might be noticeable during prolonged handheld use

Best for

Automotive technicians and engineers needing a portable, multi-channel oscilloscope for vehicle diagnostics

Not ideal for

Hobbyists on a tight budget or those needing a general-purpose bench oscilloscope with advanced math functions

Specifications

Operating Voltage (VDC)7.4
No. of Channels4
Bandwidth100
Length (mm)270
Width (mm)190
Weight (g)1746
Shipping Weight2.811 kg
Shipping Dimensions32 × 17 × 27 cm

What's in the box

  • 1 x Micsig ATO1004 100MHz 4 Channel Automotive Oscilloscope for ECU Diagnostics
  • 2 x Passive Probe
  • 4 x BNC to banana lead
  • 2 x Alligator Clip Pair
  • 4 x Flexible needle
  • 2 x Wipes
  • 1 x Manual

Frequently Asked Questions

What types of vehicles can the Micsig ATO1004 be used on?
The ATO1004 is designed for automotive diagnostics and supports both traditional fuel engines and electric vehicles. It can decode CAN, CAN FD, LIN, UART, SPI, and I²C buses commonly found in modern vehicles.
How long does the battery last on a full charge?
The internal 7500 mAh lithium battery provides more than five hours of continuous use, depending on usage conditions.
Can I save waveforms and screenshots?
Yes, the oscilloscope has 32 GB of built-in storage for saving waveform data, screenshots, and video recordings directly on the device.
What is included in the package?
The package includes the ATO1004 oscilloscope, two passive probes, four BNC to banana leads, two alligator clip pairs, four flexible needles, two wipes, and a manual.
Does the oscilloscope require external power to operate?
No, it runs on its internal 7.4 VDC battery, which supports cordless operation. You can charge the battery when needed using the appropriate charger.
Is the touchscreen easy to use with gloves?
The 10.1-inch capacitive touchscreen is designed for direct finger interaction. While it may respond to some gloves, optimal performance is achieved with bare fingers or capacitive-friendly gloves.

Overview

The Micsig ATO1004 is a dedicated automotive oscilloscope designed for ECU diagnostics and electrical signal analysis on modern vehicles. It offers a 100 MHz bandwidth across four analog channels, enabling you to observe multiple signals at once, whether you are checking sensor outputs, actuator commands, or serial communication lines. The device is built around a 10.1-inch capacitive touchscreen with a crisp 1280x800 resolution, and it runs the SigtestUI multitasking system, which provides a smooth, app-like experience for setting up measurements and navigating menus.

Key Features

  • Four analog channels: Capture up to four signals simultaneously for comparative analysis.
  • 100 MHz bandwidth: Suitable for a wide range of automotive signals, from slow sensor voltages to faster bus data.
  • Large touchscreen: 10.1-inch display with 1280x800 resolution and capacitive touch for direct interaction.
  • SigtestUI system: Multitasking interface that simplifies complex measurements and speeds up workflow.
  • Long battery life: The internal 7500 mAh lithium battery supports more than five hours of continuous operation.
  • Serial bus decoding: Built-in support for CAN, CAN FD, LIN, UART, SPI, and I²C protocols.
  • Ample storage: 32 GB of internal memory for saving waveforms, screenshots, and video recordings.

Specifications Explained

The 100 MHz bandwidth indicates the range of signal frequencies the oscilloscope can accurately display, making it appropriate for most automotive electrical and electronic diagnostics. Four channels allow you to monitor several points in a circuit at the same time, which is useful for comparing inputs and outputs or observing multiple bus lines. The 7.4 VDC operating voltage is supplied by the internal battery, and the 7500 mAh capacity gives you over five hours of cordless use. The 32 GB storage means you can keep extensive logs of your diagnostic sessions without needing external media. Physical dimensions of 270 mm by 190 mm and a weight of 1746 g make the unit portable yet stable on a workbench.

Compatibility and Requirements

The ATO1004 is designed for automotive diagnostics and supports decoding of CAN, CAN FD, LIN, UART, SPI, and I²C serial buses. It is suitable for both conventional fuel engines and electric vehicles. No additional software or hardware is required beyond the included accessories to begin basic measurements. The oscilloscope operates on its internal 7.4 VDC battery, which is charged via the supplied charger (check package contents).

Typical Uses

  • Diagnosing sensor and actuator signals in engine management systems.
  • Analysing serial bus communication for faults in CAN, LIN, and other networks.
  • Checking electrical signals in electric vehicle systems.
  • Capturing intermittent faults with long recording sessions.
  • Training and educational demonstrations of automotive signals.

What's in the Box

  • 1 x Micsig ATO1004 100MHz 4 Channel Automotive Oscilloscope
  • 2 x Passive Probe
  • 4 x BNC to banana lead
  • 2 x Alligator Clip Pair
  • 4 x Flexible needle
  • 2 x Wipes
  • 1 x Manual

Quick specs

Operating Voltage (VDC)
7.4
No. of Channels
4
Bandwidth
100
Length (mm)
270
Width (mm)
190
Weight (g)
1746
See all specifications