
1 / 3 · Click to enlarge
AI Summary
A 200MHz, 2-channel tablet oscilloscope with a 10.1-inch HD touchscreen, 1GSa/s sampling and 110Mpts memory. Its built-in 7500mAh battery gives over five hours of portable operation, so you can troubleshoot away from mains power.
Key Highlights
- 200MHz bandwidth across 2 analog channels
- 10.1-inch HD capacitive touch display at 1280x800
- 1GSa/s real-time sampling rate for signal capture
- 110Mpts deep memory for longer acquisition windows
- 7.4V 7500mAh battery with over 5 hours of use
- Serial decoding for UART, SPI, I2C, CAN and LIN
Ideal For
- Embedded systems engineers debugging SPI, I2C and UART buses
- Automotive technicians working with CAN and LIN networks
- Field service engineers who need battery-powered measurements
- Electronics students and educators learning signal analysis
- Hardware developers who want a portable bench companion
Buying Tip
Confirm that 200MHz bandwidth and two channels cover your fastest signals before buying, and plan probe accessories for any bus or rail you test often.
Elecvora expert review
Our verdict
The TO2002 GEN 4 is a practical choice for engineers who value a large touchscreen and cordless operation over a traditional bench scope layout. Its 200MHz bandwidth, 1GSa/s sampling and 110Mpts memory cover a wide range of embedded and automotive debugging tasks.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Large 10.1-inch HD capacitive touchscreen with a tablet-style interface
- Battery-powered for over five hours of portable use
- 110Mpts deep memory for longer captures
- Serial decoding for UART, SPI, I2C, CAN and LIN
- USB, USB-C, Wi-Fi and HDMI connectivity
Cons
- Two channels limit simultaneous multi-signal comparison
- 200MHz bandwidth will not suit very high-speed digital or RF work
- Probe and accessory range is limited to what is included
Best for
Portable embedded and automotive diagnostics
Not ideal for
High-bandwidth RF or multi-channel system analysis
Specifications
| Operating Voltage (VDC) | 7.4. |
|---|---|
| No. of Channels | 2 |
| Bandwidth | 200 |
| Length (mm) | 265 |
| Width (mm) | 175 |
| Weight (g) | 1696 |
| Shipping Weight | 2.438 kg |
| Shipping Dimensions | 32 × 18 × 28 cm |
What's in the box
- 1 x MICSIG TO2002 GEN 4 200MHz 2-Channel Digital Tablet Oscilloscope
- 2 x Passive Probe
- 2 x Wipes
- 1 x Manual
Frequently Asked Questions
What bandwidth and channel count does the TO2002 GEN 4 offer?
How long can it run on battery power?
Which serial buses can it decode?
What connections does it have?
What comes in the package?
How much memory does it have for captures?
Overview
The MICSIG TO2002 GEN 4 is a digital tablet oscilloscope that combines a large touch display with a self-contained battery, making it usable both on a lab bench and at a remote test site. Rather than a conventional front panel crowded with knobs, it runs the SigtestUI multitasking interface on a 10.1-inch HD capacitive screen, so settings and measurements are reached through touch.
Two analog channels with 200MHz bandwidth and a 1GSa/s real-time sampling rate cover a wide range of everyday signal work, from power rails and clock lines to communication buses. The instrument measures 265mm by 175mm and weighs 1696g, so it packs into a tool bag without much effort.
Key Features
- Touch-first operation: a 1280x800 HD capacitive display and the SigtestUI interface keep menus accessible during troubleshooting.
- Deep acquisition memory: 110Mpts of memory supports longer captures and detailed inspection of signal behaviour.
- Portable power: the internal 7.4V 7500mAh battery provides over five hours of operation without mains power.
- Serial bus decoding: support for UART, SPI, I2C, CAN and LIN helps decode embedded and automotive traffic.
- Flexible connectivity: USB 3.0/2.0, USB-C, Wi-Fi, HDMI and a grounding interface are provided for data transfer and external display.
Specifications Explained
Bandwidth and channels: 200MHz with two analog channels is enough for general embedded, automotive and low-frequency RF debugging where signals sit within that range.
Sampling rate: a 1GSa/s real-time sampling rate determines how finely fast edges are captured; check it against the signal speeds you expect to measure.
Memory depth: 110Mpts lets you record longer time windows at useful sample rates, which matters when hunting intermittent events.
Power: the 7.4V operating voltage is supplied by the built-in 7500mAh battery, rated for over five hours of use.
Compatibility and Requirements
The scope ships with two passive probes and connects to other equipment through USB 3.0/2.0, USB-C, Wi-Fi and HDMI. Serial decoding covers UART, SPI, I2C, CAN and LIN buses. No additional software requirements are specified in the supplied product data.
Typical Uses
Embedded developers can inspect I2C, SPI and UART traffic; automotive technicians can work with CAN and LIN networks; field engineers can take measurements where mains power is unavailable; and educators can demonstrate signal behaviour on a touchscreen interface.
What's in the Box
- 1 x MICSIG TO2002 GEN 4 200MHz 2-Channel Digital Tablet Oscilloscope
- 2 x Passive Probe
- 2 x Wipes
- 1 x Manual
Quick specs
- Operating Voltage (VDC)
- 7.4.
- No. of Channels
- 2
- Bandwidth
- 200
- Length (mm)
- 265
- Width (mm)
- 175
- Weight (g)
- 1696



















