Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This stepper motor drivers is a good fit for makers, students and electronics hobbyists. Main specs: model series MKS Series; compatible motor driver TB6600; compatibility MKS SGEN L, RAMPS 1.4 Arduino Shield, Control Boards that Supports A4988 Form Factor.

Key Highlights

  • Model Series: MKS Series
  • Compatible Motor Driver: TB6600
  • Compatibility: MKS SGEN L, RAMPS 1.4 Arduino Shield, Control Boards that Supports A4988 Form Factor

Ideal For

  • Robots and moving models
  • Automation projects
  • Replacement for a worn motor

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model SeriesMKS Series
Compatible Motor DriverTB6600
CompatibilityMKS SGEN L, RAMPS 1.4 Arduino Shield, Control Boards that Supports A4988 Form Factor
Length (mm)20
Width (mm)15
Weight (g)10
Shipping Weight0.015 kg
Shipping Dimensions7 × 4 × 2 cm

Overview

The MKS CD V1.0 External Stepper Driver Interfacing Module is listed in our stepper motor drivers range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model Series: MKS Series
  • Compatible Motor Driver: TB6600
  • Compatibility: MKS SGEN L, RAMPS 1.4 Arduino Shield, Control Boards that Supports A4988 Form Factor (your supply must deliver at least this much current)
  • Length (mm): 20 (measure your mounting space before ordering)
  • Width (mm): 15 (measure your mounting space before ordering)
  • Weight (g): 10 (important for drones, RC models and anything you carry)
  • Shipping Weight: 0.015 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 7 × 4 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

If you’re a 3D Maker who likes to tinker and enjoys taking 3D Printing to a higher level with unique and exciting modules and components, then you’re undoubtedly going to be excited with this MKS CD V1.0 External Stepper Driver Interfacing Module. The MKS CD V1.0 is a brilliant little adapter/interfacing board that utilizes the classic A4988 Stepper Driver form factor to allow users like yourself to utilize external drivers like the powerful MKS TB6600 Stepper Motor Driver. The MKS CD V1.0 opens up fresh new opportunities for beefing up your 3D Printer’s power, while also featuring some awesome protection features that work to isolate the power between the Stepper Drivers and the Controller Boards, so as to keep all of the connected components safe from high current. It simply plugs into the controller board like a typical A4988 or similar driver would, and then connects to the external stepper driver via a simple 4-wire interface. This is particularly beneficial for 3D Printers that utilize 57/86 stepper motors, as these motors typically require high driving currents, and running high-current drivers directly through a controller board can certainly lead to costly and unexpected damage.

Features:

  1. Helps You Utilize External Stepper Drivers
  2. Acts As Interface Between Full-Sized Drivers And The A4988 Form Factor
  3. Easy To Use

Package Includes:

1 x MKS CD V1.0 External Stepper Driver Interfacing Module

1 x Connecting Cable

Quick specs

Model Series
MKS Series
Compatible Motor Driver
TB6600
Compatibility
MKS SGEN L, RAMPS 1.4 Arduino Shield, Control Boards that Supports A4988 Form Factor
Length (mm)
20
Width (mm)
15
Weight (g)
10
See all specifications