
1 / 5 · Click to enlarge
AI Summary
The MX1508 is a tiny dual H-bridge module that drives two DC motors or one 4-wire two-phase stepper from a 2-10V supply. It handles 1.5A continuous per channel with 2.5A peaks and includes thermal protection for stall safety.
Key Highlights
- Dual H-bridge drives two DC motors or one 4-wire stepper
- 2V to 10V motor supply suits small battery-powered builds
- 1.5A continuous per channel, 2.5A peak current
- Thermal protection with hysteresis guards against motor stall
- Low standby current under 0.1uA for battery-friendly use
- Compact board with 2 mm mounting holes
Ideal For
- Makers building battery-powered smart cars
- Students learning motor control with microcontrollers
- Hobbyists assembling small wheeled robots
- DIYers needing compact stepper motor drive
- Prototypers working within a 2-10V motor supply
Buying Tip
Check that your motors run within 2V to 10V and draw no more than 1.5A continuously per channel before pairing them with this board.
Elecvora expert review
Our verdict
A compact, affordable driver for small low-voltage motion projects, with useful thermal protection and a very low standby draw. It is best treated as a light-duty board rather than a high-current workhorse.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Drives two DC motors or one 4-wire stepper
- Wide 2V to 10V supply range for small builds
- Thermal shutdown with automatic recovery
- Very low standby current
- Tiny footprint with 2 mm mounting holes
Cons
- Current limited to 1.5A continuous per channel
- IC variant is shipped at random
- Requires soldering and a separate controller
Best for
Small battery-powered cars, robots and light mechanisms
Not ideal for
High-current or high-voltage motor applications
Specifications
| Shipping Weight | 0.05 kg |
|---|---|
| Shipping Dimensions | 8 × 6 × 1 cm |
What's in the box
- 1 x MX1508 Dual H Bridge DC PWM Stepper Motor Driver
Frequently Asked Questions
Can this module drive two motors at once?
What supply voltage does it need?
How much current can it handle?
What happens if a motor stalls?
Which IC will I receive?
What is included with the product?
Overview
The MX1508 is a small dual H-bridge driver module for projects that need controlled motion from a low-voltage supply. It can run two independent DC motors or a single 4-wire, two-phase stepper motor, letting you set direction and adjust rotation speed through PWM signals from your controller. Because it works from a 2V to 10V motor supply, it fits neatly into battery-powered smart cars, toy vehicles and small robots where space and power are limited.
Key Features
- Dual H-bridge output: drive two DC motors or one 4-wire two-phase stepper motor from a single board.
- Forward and reverse control: change rotation direction and fine-tune speed with PWM input.
- Current headroom: 1.5A continuous per channel with peaks up to 2.5A.
- Thermal protection: built-in shutdown with hysteresis helps protect the driver during a motor stall.
- Safe idle behaviour: a common-conduction circuit keeps the motor from misbehaving when an input pin is left floating.
- Low standby draw: standby current stays below 0.1uA, which is helpful for battery-powered designs.
Specifications Explained
The 2V to 10V supply range defines the motors you can pair with this board; stay within that window and match your motor's rated voltage. The 1.5A continuous figure is the current each channel can handle steadily, while the 2.5A peak rating covers brief surges such as startup. Thermal protection with hysteresis means the board shuts down if it overheats and recovers automatically once temperatures fall, which is useful when a motor stalls. The common-conduction circuit is a safety detail: if a control input is left floating, the motor will not run unexpectedly. Mounting holes measure 2 mm in diameter, so plan your fixings accordingly.
Compatibility and Requirements
This module is intended for two DC motors or one 4-wire, two-phase stepper motor operating within the 2V to 10V range. You will need a suitable motor power source and a controller able to provide direction and PWM signals. Note that the board is supplied with one of several equivalent IC variants (MX1508, MX1616H, TCT1508 or JL AS208PO1429-25C4) that perform the same function, and the variant shipped is selected at random.
Typical Uses
- Battery-powered smart cars and toy cars
- Small wheeled robots and robotic chassis
- Simple mechanisms needing forward, reverse and speed control
- Compact stepper-driven projects using a 4-wire two-phase motor
What's in the Box
One MX1508 dual H-bridge DC PWM stepper motor driver module.













