
1 / 4 · Click to enlarge
At a glance
This brushed / brushless dc motor driver is a good fit for makers, students and electronics hobbyists. Main specs: current rating (a) 2.5; length (mm) 28; width (mm) 28. Check that your power source supplies 2 to 10 before connecting it.
Key Highlights
- Current Rating (A): 2.5
- Length (mm): 28
- Width (mm): 28
Ideal For
- Robots and moving models
- Automation projects
- Replacement for a worn motor
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Current Rating (A) | 2.5 |
|---|---|
| Voltage Rating (V) | 2 to 10 |
| Operating Voltage (VDC) | 2 ~ 10 |
| Length (mm) | 28 |
| Width (mm) | 28 |
| Weight (g) | 0.005 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 6 × 7 × 2 cm |
Overview
The MX1919 Based Motor Driver Module - 2.5A is listed in our brushed / brushless dc motor driver range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Current Rating (A): 2.5 (your supply must deliver at least this much current)
- Voltage Rating (V): 2 to 10 (match this to your power supply; too high a voltage can damage the part)
- Operating Voltage (VDC): 2 ~ 10 (match this to your power supply; too high a voltage can damage the part)
- Length (mm): 28 (measure your mounting space before ordering)
- Width (mm): 28 (measure your mounting space before ordering)
- Weight (g): 0.005 (important for drones, RC models and anything you carry)
- Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 6 × 7 × 2 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This MX1919 Based Motor Driver Module is a high-power motor driver perfect for driving DC Motors and Stepper Motors. It uses the popular MX1919 motor driver IC. It can control up to 2 DC motors with directional and speed control. This motor driver is perfect for robotics and mechatronics projects and perfect for controlling motors from microcontrollers, switches, relays, etc. Perfect for driving DC and Stepper motors for micro mouse, line-following robots, robot arms, etc.
Note:
1.This Product is available in two different variants of IC chip (MX1919 and MX1515) with the same working, we will ship it randomly.
2.Actual product may vary in terms of color.
Pins:
- MOTOR-A: Motor A output
- MOTOR-B: Motor B output
- IN A1: 1st input for Motor A
- IN A2: 2nd input for Motor A
- IN B1: 1st input for Motor A
- IN B2: 2nd input for Motor B
Usage:
H-bridges are typically used in controlling motors' speed and direction but can be used for other projects such as driving the brightness of certain lighting projects such as high powered LED arrays.
Arduino Sketch Considerations:
Features:
- 2 Pin Connector For Motor's and Power
- High-Quality Construction
- Can drive up to 2.5A of current.
- Drives2 motors.
Package Includes:
1 x MX1919 Based Motor Driver Module – 2.5A
1 x Connecting Cable
Quick specs
- Current Rating (A)
- 2.5
- Voltage Rating (V)
- 2 to 10
- Operating Voltage (VDC)
- 2 ~ 10
- Length (mm)
- 28
- Width (mm)
- 28
- Weight (g)
- 0.005













