Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Nextion NX3224F028 is a 2.8-inch resistive touch HMI display with a 320x240 TFT panel and onboard ARM Cortex-M0+ MCU. It communicates over a simple TTL serial UART and supports deep sleep down to 0.25 mA for battery-friendly projects.

Key Highlights

  • 2.8-inch TFT display with 320x240 pixel resolution
  • Resistive touch screen for precise input
  • Onboard ARM Cortex-M0+ 64MHz MCU handles GUI logic
  • Single TTL serial UART interface for easy integration
  • Deep sleep mode draws as little as 0.25 mA
  • 64K color support for clear, colorful graphics

Ideal For

  • Embedded developers building custom control panels
  • Arduino and Raspberry Pi hobbyists adding a touch interface
  • Battery-powered HMI projects needing low sleep current
  • Industrial or educational prototyping with serial displays
  • Makers upgrading from basic text displays to graphical UI

Buying Tip

Confirm that your host board has a free UART port and can supply 5V at 500mA before purchasing, as the display communicates only over serial.

Elecvora expert review

Our verdict

The Nextion Discovery NX3224F028 offers a straightforward way to add a graphical touch interface to embedded projects with minimal wiring and processing overhead. Its low deep-sleep current and broad UART compatibility make it a sensible choice for battery-powered and hobbyist applications.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Simple single-wire serial communication
  • Low power consumption in deep sleep
  • Onboard MCU reduces load on host controller
  • Wide compatibility with common microcontrollers
  • Includes test board and cable for quick start

Cons

  • Resistive touch may not suit multi-touch gestures
  • Requires 5V supply at 500mA
  • Limited to 320x240 resolution

Best for

Makers and engineers needing a compact, low-power serial HMI display

Not ideal for

Projects requiring high-resolution or capacitive multi-touch screens

Specifications

Model No. / NameNX3224F028
Touch TypeResistive
Input Voltage (V)DC 5V 500mA
Resolution (pixels)320×240 pixel
Panel TypeTFT
Display BacklightLED White
Backlight Lifetime (Avg)>30,000 Hours
Color64K 65536 colors
Operating Temperature (°C)-20 to 70°C
Shipping Weight0.225 kg
Shipping Dimensions11 × 7 × 3 cm

What's in the box

  • 1 x 2.8-inch Nextion HMI Display
  • 1 x power supply test board
  • 1 x 4-pin Grove cable

Frequently Asked Questions

What microcontrollers can I use with this display?
It works with any board or microcontroller that has a UART port, including Arduino, Raspberry Pi, ESP8266, ESP32, PIC, AVR, ARM, and 8051.
What is the power requirement?
The display requires a DC 5V supply capable of providing at least 500mA.
Does it support deep sleep?
Yes, when deep sleep mode is activated, the working current can drop to as low as 0.25 mA.
What is included in the package?
The package includes the 2.8-inch Nextion HMI display, a power supply test board, and a 4-pin Grove cable.
How do I design the interface?
You use the Nextion editor software, which offers drag-and-drop components such as buttons, text, and progress bars, then upload the project to the display.
What is the operating temperature range?
The display is rated for operation between -20°C and 70°C.

Overview

The Nextion Discovery NX3224F028 is a 2.8-inch HMI touch display module that brings a graphical user interface to embedded projects without demanding heavy processing from your main controller. It pairs a 320x240 TFT panel with a resistive touch layer and an onboard ARM Cortex-M0+ 64MHz microcontroller. The display handles rendering and touch input, while your host board communicates with it over a single TTL serial UART connection. This makes it a practical choice for Arduino, Raspberry Pi, ESP8266, ESP32, PIC, AVR, ARM, and even 8051-based systems that have a UART port.

Key Features

  • 2.8-inch TFT panel: 320x240 pixel resolution with 64K (65,536) colors for readable text and clear graphics.
  • Resistive touch: Responds to finger or stylus input, suitable for menus, buttons, and sliders.
  • Onboard MCU: ARM Cortex-M0+ at 64MHz with 3584 bytes SRAM and 4MB flash memory for storing your interface design.
  • Simple wiring: XH2.54 4-pin connector carries +5V, TX, RX, and GND; only one serial port is needed for communication.
  • Low-power operation: When deep sleep mode is activated, working current drops to as low as 0.25 mA, helping battery-powered devices last longer.
  • LED backlight: White LED backlight with an average lifetime exceeding 30,000 hours.

Specifications Explained

The 320x240 resolution is well suited to status displays, control menus, and simple data visualization. The 64K color depth means gradients and icons appear smooth rather than banded. Resistive touch works with a finger or a stylus and is often preferred in industrial or glove-friendly environments because it registers pressure rather than capacitance. The 5V DC input at 500mA is a common requirement for embedded projects, and the wide operating temperature range of -20 to 70°C supports use in many indoor and sheltered outdoor settings. The onboard 4MB flash stores your GUI project, so the display can boot directly into your interface without external memory. The ARM Cortex-M0+ core runs at 64MHz, which is sufficient for responsive touch handling and screen updates in this class of display.

Compatibility and Requirements

The module works with any host board or microcontroller that has a UART port. This includes popular platforms such as Arduino, Raspberry Pi, ESP8266, ESP32, PIC, AVR, ARM, and 8051 microcontrollers. You will need a 5V DC power source capable of supplying at least 500mA. The 4-pin XH2.54 interface carries power and serial lines, so connection to your host is straightforward. No additional drivers are required on the display side; the Nextion editor is used to design the interface and transfer it to the device.

Typical Uses

  • Control panels for home automation or equipment
  • Data monitors for sensors and instruments
  • Portable battery-powered HMI devices
  • Educational projects and prototyping
  • Replacement or upgrade of existing serial displays

What's in the Box

  • 1 x 2.8-inch Nextion HMI Display
  • 1 x power supply test board
  • 1 x 4-pin Grove cable

Quick specs

Model No. / Name
NX3224F028
Touch Type
Resistive
Input Voltage (V)
DC 5V 500mA
Resolution (pixels)
320×240 pixel
Panel Type
TFT
Display Backlight
LED White
See all specifications

More from NEXTION

View all →

Related Products

View all →