
1 / 3 · Click to enlarge
At a glance
Made by NEXTION, this hmi lcd display is a good fit for everyday home and hobby use. Main specs: model no. / name NX4827P043 011C; touch type Capacitive; serial port 3.3V/5.0V TTL. Check that your power source supplies 5 V before connecting it.
Key Highlights
- Model No. / Name: NX4827P043 011C
- Touch Type: Capacitive
- Serial Port: 3.3V/5.0V TTL
Ideal For
- Everyday use
Buying Tip
Read the full specifications and the package contents list below to make sure it does what you need.
Specifications
| Model No. / Name | NX4827P043 011C |
|---|---|
| Touch Type | Capacitive |
| Operating Current (mA) | 220 mA |
| Flash Memory | 120 MB |
| RAM | 512 KB |
| Serial Port | 3.3V/5.0V TTL |
| Operating Voltage (VDC) | 5 V |
| Touch | > 1 million |
| Backlight Lifetime (Avg) | >30,000 Hours |
| Brightness (NIT) | 300nit |
| Length (mm) | 140 |
| Width (mm) | 100 |
| Weight (g) | 185 |
| Operating Temperature (°C) | -20 to 70°C |
| Shipping Weight | 0.274 kg |
| Shipping Dimensions | 18.5 × 13.5 × 3.5 cm |
Overview
The Nextion Intelligent NX4827P043_011C_Y 4.3" HMI Capacitive Touch Display with enclosure, made by NEXTION, is listed in our hmi lcd display range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model No. / Name: NX4827P043 011C
- Touch Type: Capacitive
- Operating Current (mA): 220 mA (your supply must deliver at least this much current)
- Flash Memory: 120 MB (more memory leaves room for larger programs and buffers)
- RAM: 512 KB (more memory leaves room for larger programs and buffers)
- Serial Port: 3.3V/5.0V TTL (confirm your cable or board uses the same connector)
- Operating Voltage (VDC): 5 V (match this to your power supply; too high a voltage can damage the part)
- Touch: > 1 million
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Nextion Intelligent NX4827P043_011C_Y 4.3" HMI Capacitive Touch Display with an enclosure having a Capacitive touch screen. Nextion displays have a built-in microcontroller that controls the display, it takes care of which button has been clicked, creating text, storing images, or change the background. The Nextion display then communicates with your microcontroller using serial communication at a 9600 baud rate.
The Nextion Intelligent NX4827P043-011R 4.3″ Capacitive Touchscreen Display is so simple to the interface that it can easily work with Arduino, Raspberry Pi, ESP8266, ESP32, PIC Microcontroller, AVR controller, ARM Microcontroller and you won’t believe it will work even with basic 8051 microcontrollers basically it will work with any board or Microcontroller that has UART port.
Note: The small power supply test board and connecting wire inside the package allow you to test if the electrical supply is enough or not. See the image below on how to use it.
Features:
- 4.3” LCD-TFT HMI display module
- 480 x 272 screen resolution
- RGB 65K true-to-life colors
- Capacitive touch panel
- 300 nit Brightness
- Onboard 200MHz MCU
- 512 KB of SRAM
- 128 MB of Flash memory
- 1024 Byte EEPROM
Package Includes:
1 x Nextion Intelligent NX4827P043_011C_Y 4.3" HMI Capacitive Touch Display with enclosureQuick specs
- Model No. / Name
- NX4827P043 011C
- Touch Type
- Capacitive
- Operating Current (mA)
- 220 mA
- Flash Memory
- 120 MB
- RAM
- 512 KB
- Serial Port
- 3.3V/5.0V TTL





















