Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A ready-built 3S1P lithium-ion pack using A Grade NMC N18650CH cells, giving 11.1V nominal and 2000mAh with a 3C discharge rating. The onboard BMS plus JST XH charge and Amass Nylon T discharge connectors make it simple to wire into RC and portable projects.

Key Highlights

  • 3S1P NMC N18650CH cells with 11.1V nominal and 2000mAh capacity
  • 3C continuous discharge rating for moderate-current RC and project loads
  • Integrated BMS protects against overcharge, over-discharge and short circuits
  • 4-pin JST XH charge connector and Amass Nylon T discharge port
  • Compact 70 x 66 mm footprint at just 166 g
  • Charges at 1C to a maximum of 12.6V

Ideal For

  • RC car and boat hobbyists needing a protected 3S pack
  • Drone and FPV pilots powering ground stations and accessories
  • Electronics prototypers building compact 12V-class devices
  • Small OEM projects requiring a repeatable 3S1P pack
  • Bench testers who want a ready-made pack with BMS

Buying Tip

Check that your charger supports a 3S lithium-ion profile with a 4-pin JST XH lead and a 12.6V cutoff before ordering, since the pack's connectors are fixed.

Elecvora expert review

Our verdict

A tidy, protected 3S1P lithium-ion pack that removes the guesswork of cell assembly for moderate-current projects. Its connector layout and BMS make it approachable, though the 3C rating rules out high-draw racing use.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Factory-assembled with integrated BMS protection
  • Clear separate charge and discharge connectors
  • Compact 70 x 66 mm footprint at 166 g
  • 1C charging keeps heat and wear low

Cons

  • 3C continuous rating limits high-current applications
  • Fixed connectors may need adapters for some setups
  • Capacity of 2000mAh is modest for long runtime needs

Best for

Protected 3S power in RC models, prototypes and portable electronics

Not ideal for

High-current racing or long-endurance flight packs

Specifications

Model Series3
Nominal Voltage (V)11.1
Nominal Capacity (mAh)2000 mAh
Continuous Discharge Current (A)3C
BMS (Y/N)Y
Charge Connector4 Pin JST XH
Discharge PortAmass Nylon T
Max. Charging Voltage (V)12.6
Max. Discharging Voltage (V)8.7
Charging Current1C
Length (mm)70
Width (mm)66
Weight (g)166
Shipping Weight0.18 kg
Shipping Dimensions18 × 7 × 5 cm

What's in the box

  • 1 x Pro-Range A Grade NMC N18650CH 11.1V 2000mAh 3C 3S1P Li-Ion Battery Pack

Frequently Asked Questions

What voltage does this pack deliver?
It has an 11.1V nominal rating across three cells in series, reaching 12.6V when fully charged. The stated maximum discharging voltage is 8.7V.
Can I charge it with my existing LiPo charger?
Only if your charger supports a 3S lithium-ion profile with a 12.6V maximum and a 4-pin JST XH connection. Charging should be done at 1C.
How much current can it supply?
The pack carries a 3C continuous discharge rating, so it suits moderate loads rather than high-current racing setups.
What connectors are fitted?
Charging uses a 4-pin JST XH connector and discharge uses an Amass Nylon T port. Check your equipment matches before ordering.
Is a protection board included?
Yes, the pack has a built-in BMS that manages protection during charging and discharging.
What is included with the battery?
The package contains one Pro-Range A Grade NMC N18650CH 11.1V 2000mAh 3C 3S1P Li-Ion Battery Pack.

Overview

The Pro-Range A Grade NMC N18650CH pack is a factory-assembled 3S1P lithium-ion battery built from three 18650-format NMC cells. It provides 11.1V nominal, 2000mAh capacity and a 3C continuous discharge rating, making it a practical 12V-class power source for RC models, drone accessories and portable electronics. A built-in BMS manages cell protection, and the pack arrives with a 4-pin JST XH charge connector and an Amass Nylon T discharge port so you can connect it without rebuilding the harness.

Key Features

  • Protected 3-cell design: an integrated BMS safeguards the pack during charging and discharging.
  • Predictable connector layout: separate JST XH charging lead and Amass Nylon T discharge port.
  • Compact and light: 70 x 66 mm body weighing 166 g.
  • Balanced charge profile: 1C charging to a 12.6V maximum.
  • Stable NMC chemistry: consistent voltage delivery through the discharge curve.

Specifications Explained

Voltage and capacity

11.1V nominal reflects three cells in series, each contributing about 3.7V. Fully charged the pack reaches 12.6V, and the stated maximum discharging voltage is 8.7V, so your device and BMS should be configured to stop well before that floor is reached in normal use. At 2000mAh, expect a modest runtime that suits short flights, bench testing and low-draw electronics rather than long endurance missions.

Discharge and charge rates

The 3C continuous discharge rating means the pack is intended for loads in the moderate range rather than high-current racing setups. Charging at 1C keeps heat low and is gentler on cell life than faster rates.

Connectors and BMS

The 4-pin JST XH connector handles charging and balance wiring, while the Amass Nylon T plug covers discharge. Confirm your charger and device use matching connectors before first use.

Compatibility and Requirements

Use a lithium-ion charger suited to a 3S pack with a 12.6V maximum and a 4-pin JST XH connection. Your load should draw within the 3C continuous rating and tolerate an 11.1V nominal supply. The pack is not a drop-in replacement for LiPo packs with different connector types without an adapter or re-wiring.

Typical Uses

Well matched to RC cars and boats, drone ground equipment, FPV accessories, portable instruments, test rigs and prototype enclosures where a protected 3-cell pack is required. Hobbyists and small OEM runs benefit from the consistent build and connector standard.

What's in the Box

  • 1 x Pro-Range A Grade NMC N18650CH 11.1V 2000mAh 3C 3S1P Li-Ion Battery Pack

Quick specs

Model Series
3
Nominal Voltage (V)
11.1
Nominal Capacity (mAh)
2000 mAh
Continuous Discharge Current (A)
3C
BMS (Y/N)
Y
Charge Connector
4 Pin JST XH
See all specifications