Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A protected 4S2P NMC 18650 pack delivering 14.8V nominal and 6000mAh with a 3C continuous discharge rating. The built-in BMS plus JST XH charge and Amass T discharge connectors make it a tidy drop-in power block for RC and portable builds.

Key Highlights

  • 4S2P NMC 18650 configuration with 14.8V nominal and 6000mAh capacity
  • 3C continuous discharge rating for steady current draw
  • Integrated BMS protects against overcharge, over-discharge and short circuits
  • 5-pin JST XH charge connector and Amass nylon T discharge port
  • Compact 85 x 45mm footprint at approximately 608g
  • Charges at 1C with a 16.8V maximum charging voltage

Ideal For

  • Drone builders needing a compact 14.8V pack
  • RC hobbyists with Amass T connector setups
  • FPV ground station and field gear builders
  • Portable electronics and prototype enclosures
  • Makers replacing bare 18650 cell assemblies

Buying Tip

Confirm your model uses an Amass T discharge plug and that your charger supports 4S lithium-ion with a 5-pin JST XH balance lead before ordering.

Elecvora expert review

Our verdict

A neatly finished protected 4S2P pack with sensible pre-fitted connectors and a clear voltage window. It suits builders who want a compact 14.8V block without wiring cells themselves.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • BMS included for charge and discharge protection
  • Pre-fitted JST XH charge and Amass T discharge connectors
  • Compact 85 x 45mm form factor at around 608g
  • Clear 16.8V maximum and 11.6V minimum voltage limits

Cons

  • Connector types are fixed, so adapters may be needed
  • Only 3C continuous discharge, so high-draw builds need a different pack
  • Requires a compatible 4S lithium-ion charger

Best for

RC and portable builds needing a protected 14.8V pack with T connector

Not ideal for

High-current applications that exceed a 3C continuous discharge rating

Specifications

Model Series4
Nominal Voltage (V)14.8
Nominal Capacity (mAh)6000 mAh
Continuous Discharge Current (A)3C
BMS (Y/N)Y
Charge Connector5 Pin JST XH
Discharge PortAmass Nylon T
Max. Charging Voltage (V)16.8
Max. Discharging Voltage (V)11.6
Charging Current1C
Length (mm)85
Width (mm)45
Weight (g)~608
Shipping Weight0.7 kg
Shipping Dimensions23 × 8 × 7 cm

What's in the box

  • 1 x Pro-Range NMC 18650 14.8V 6000mAh 3C 4S2P Li-Ion Battery Pack

Frequently Asked Questions

What voltage does this battery pack deliver?
It is a 4S pack with a 14.8V nominal voltage, a maximum charging voltage of 16.8V and a maximum discharging voltage of 11.6V.
Does the pack include a battery management system?
Yes, a BMS is built in to help protect the pack during charging and discharging.
Which connectors are fitted?
Charging uses a 5-pin JST XH connector and discharge uses an Amass nylon T port.
What charge current should I use?
The specified charging current is 1C, and the charger must not exceed 16.8V.
What is included in the package?
The package contains one Pro-Range 14.8V 6000mAh 3C 4S2P Li-Ion Battery Pack.
How should I store the pack?
Keep it away from heat and moisture, avoid discharging below 11.6V and recharge periodically during long storage.

Overview

The Pro-Range 14.8V 6000mAh pack is a 4S2P lithium-ion battery built from NMC 18650 cells. Four cells in series set the nominal voltage at 14.8V, while the 2P arrangement doubles capacity to 6000mAh. The result is a rectangular block roughly 85mm long and 45mm wide, weighing about 608g, which is easy to strap into an airframe or enclosure.

A built-in BMS manages the pack, and the wiring is already terminated: a 5-pin JST XH connector for charging and an Amass nylon T connector for discharge. That saves you from soldering balance leads or main leads before first use.

Key Features

  • 4S2P NMC 18650 layout for a 14.8V nominal rail with 6000mAh capacity.
  • 3C continuous discharge rating, suited to builds with a steady current demand.
  • Integrated BMS for protection during charge and discharge.
  • Defined connectors: 5-pin JST XH for charging, Amass nylon T for discharge.
  • 1C charging with a 16.8V maximum charging voltage.

Specifications Explained

Voltage window: the pack is nominal 14.8V, charges to a maximum of 16.8V and should not be discharged below 11.6V. Your charger and your model's low-voltage cutoff should be set with this window in mind.

Capacity and current: 6000mAh is the nominal capacity. The 3C continuous rating describes the pack's discharge capability; always confirm your build's current draw stays within that rating and within the BMS limits.

Charging: charge current is specified at 1C, so use a charger that supports the 4S lithium-ion voltage window and the JST XH balance connector.

Compatibility and Requirements

The pack is intended for devices that accept a 14.8V nominal lithium-ion supply and can mate with an Amass nylon T discharge plug. Charging requires a compatible 4S lithium-ion charger with a 5-pin JST XH connection and a 16.8V maximum output. Check the connector type and the physical space in your model before ordering, since the pack measures approximately 85 x 45mm and weighs around 608g.

Typical Uses

Drone and RC builds, FPV ground equipment, portable electronics projects and prototype enclosures that need a protected 14.8V block with pre-fitted connectors. The rectangular form factor is often easier to mount than a soft pouch pack of similar capacity.

What's in the Box

One Pro-Range 14.8V 6000mAh 3C 4S2P Li-Ion Battery Pack.

Quick specs

Model Series
4
Nominal Voltage (V)
14.8
Nominal Capacity (mAh)
6000 mAh
Continuous Discharge Current (A)
3C
BMS (Y/N)
Y
Charge Connector
5 Pin JST XH
See all specifications