Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A protected 14.8V 7500mAh lithium-ion pack built from 18650 NMC cells in a 4S3P layout. It gives drones, RC models and custom builds a compact, BMS-managed power source with XT60 output and a 5-pin JST XH charge port.

Key Highlights

  • 14.8V nominal from a 4S3P 18650 NMC configuration
  • 7500mAh capacity for longer run times between charges
  • 3C continuous discharge with a 1C charging rate
  • Integrated BMS protects against common cell faults
  • Amass XT60 discharge port and 5-pin JST XH charge connector
  • Compact 85 x 60mm body weighing roughly 690g

Ideal For

  • Drone builders looking for a 4S lithium-ion power pack
  • RC hobbyists running models within a 3C continuous draw
  • Makers and prototyping teams needing a protected pre-wired pack
  • Portable device designers working with a compact 85 x 60mm footprint

Buying Tip

Check that your charger supports a 16.8V maximum charge voltage and a 5-pin JST XH lead before ordering, since the pack's charge port is fixed.

Elecvora expert review

Our verdict

A tidy, protected 4S lithium-ion pack that saves build time thanks to its pre-fitted XT60 and JST XH connectors. It is a sensible pick for steady-draw drone, RC and prototyping work rather than high-burst applications.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • BMS included for managed operation
  • Standard XT60 and 5-pin JST XH connectors already fitted
  • Compact 85 x 60mm body at roughly 690g
  • 7500mAh capacity in a 4S3P layout

Cons

  • 3C continuous rating limits high-current use
  • Requires a charger with a matching 5-pin JST XH lead
  • Discharge floor of 11.6V must be respected to avoid over-discharge

Best for

Drones, RC models and custom builds needing a protected 4S lithium-ion pack

Not ideal for

Applications drawing well beyond a 3C continuous rate

Specifications

Nominal Voltage (V)14.8
Nominal Capacity (mAh)7500 mAh
Continuous Discharge Current (A)3C
BMS (Y/N)Y
Charge Connector5 Pin JST XH
Discharge PortAmass XT60
Max. Charging Voltage (V)16.8
Max. Discharging Voltage (V)11.6
Charging Current1C
Length (mm)85
Width (mm)60
Weight (g)~690
Model Series4
Shipping Weight0.95 kg
Shipping Dimensions25 × 8 × 7 cm

What's in the box

  • 1 x Pro-Range A Grade NMC N18650CH 14.8V 7500mAh 3C 4S3P Li-Ion Battery Pack

Frequently Asked Questions

What voltage does this pack run at?
It has a nominal voltage of 14.8V, charges to a maximum of 16.8V and should not be discharged below 11.6V.
How much current can it deliver?
The pack is rated for 3C continuous discharge, and charging should be kept to 1C or below.
What connectors does it use?
Discharge goes through an Amass XT60 port, while charging uses a 5-pin JST XH connector.
Does it have built-in protection?
Yes, the pack includes a BMS to manage and protect the cells during use and charging.
What is included in the box?
You receive one Pro-Range A Grade NMC N18650CH 14.8V 7500mAh 3C 4S3P Li-Ion Battery Pack.
How should I store and care for it?
Keep it away from extreme heat, avoid discharging below 11.6V and recharge with a compatible 4S lithium-ion charger using the JST XH lead.

Overview

The Pro-Range NMC 18650 14.8V 7500mAh pack is a ready-assembled lithium-ion battery built from 18650 cells in a 4S3P layout. That means four cells in series to reach 14.8V nominal, with three parallel strings to raise capacity to 7500mAh. The result is a compact block measuring 85 x 60mm and weighing around 690g, suited to builds where a protected, factory-wired pack is easier to work with than loose cells.

An integrated BMS manages the pack, and the wiring is already terminated: an Amass XT60 connector for discharge and a 5-pin JST XH connector for charging. The pack charges to a maximum of 16.8V and should not be discharged below 11.6V.

Key Features

  • 4S3P 18650 NMC construction for 14.8V nominal and 7500mAh capacity
  • Built-in BMS for managed, protected operation
  • 3C continuous discharge and 1C charging rates
  • Amass XT60 discharge port for common power leads
  • 5-pin JST XH charge connector for balance-style charging
  • Compact footprint at 85 x 60mm and roughly 690g

Specifications Explained

Voltage window

Nominal voltage is 14.8V, with a full charge at 16.8V and a recommended discharge floor of 11.6V. Plan your build and any low-voltage alarm around that window rather than treating the pack as a fixed 14.8V supply.

Capacity and current

At 7500mAh, the pack offers substantial stored energy for its size. The 3C continuous discharge rating and 1C charge rating describe how hard the pack is designed to be worked; check that your load and charger stay within those limits.

Connectors and BMS

The XT60 output is a widely used high-current connector, and the 5-pin JST XH charge port pairs with a matching balance charger lead. The BMS adds a layer of protection to the pack, so use a charger compatible with the connector and voltage rather than improvising.

Compatibility and Requirements

Use a charger that supports a 4S lithium-ion pack with a 16.8V maximum charge voltage and a 5-pin JST XH connection. The discharge side needs a matching XT60 plug. Because the pack is rated 3C continuous, confirm your application's current draw sits within that figure before use.

Typical Uses

This pack suits drones and RC models that call for a 4S lithium-ion supply, along with custom electronics, prototyping projects and portable devices where a protected pack with standard connectors is convenient. Its compact shape helps in enclosures where a long, thin pack will not fit.

What's in the Box

  • 1 x Pro-Range A Grade NMC N18650CH 14.8V 7500mAh 3C 4S3P Li-Ion Battery Pack

Quick specs

Nominal Voltage (V)
14.8
Nominal Capacity (mAh)
7500 mAh
Continuous Discharge Current (A)
3C
BMS (Y/N)
Y
Charge Connector
5 Pin JST XH
Discharge Port
Amass XT60
See all specifications