Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 2S1P li-ion pack delivering 7.4V nominal and 3350mAh with a 3C continuous discharge rating. Its JST XH charge and JST RCY discharge connectors make it a drop-in fit for small RC and portable builds.

Key Highlights

  • 2S1P configuration with 7.4V nominal and 3350mAh capacity
  • 3C continuous discharge for moderate current RC and gadget loads
  • 3-pin JST XH charge port plus 2-pin JST RCY BEC female discharge port
  • Compact 70 x 40 mm footprint at just 117 g
  • 1C charge rate with 8.4V maximum charging voltage
  • No built-in BMS, so external protection is required

Ideal For

  • RC hobbyists building small 2S-powered models
  • FPV pilots needing a compact 7.4V accessory pack
  • Makers and DIY electronics builders using li-ion power
  • Portable device designers fitting a 70 x 40 mm pack
  • Users with chargers and harnesses already set up for JST XH and JST RCY

Buying Tip

Confirm your charger can stop at 8.4V and that your leads match the 3-pin JST XH charge and 2-pin JST RCY BEC female discharge ports before ordering, since no BMS is included.

Elecvora expert review

Our verdict

A tidy 2S1P li-ion pack that pairs a 3350mAh capacity with a 3C discharge rating in a small 70 x 40 mm body. It is a sensible choice for builders who already run JST XH and JST RCY connectors and who understand that protection must come from outside the pack.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact 70 x 40 mm footprint at 117 g
  • Defined JST XH charge and JST RCY discharge connectors
  • 3C continuous discharge rating for moderate loads
  • 3350mAh capacity in a 2S format

Cons

  • No built-in BMS, so external protection is mandatory
  • Requires matching JST XH and JST RCY leads
  • Charge and discharge limits must be managed by the user

Best for

Small 2S li-ion RC models and portable electronics with matching connectors

Not ideal for

Plug-and-play users expecting built-in protection circuitry

Specifications

Nominal Voltage (V)7.4
Nominal Capacity (mAh)3350 mAh
Continuous Discharge Current (A)3C
BMS (Y/N)N
Charge Connector3 Pin JST XH
Discharge Port2 Pin JST RCY BEC Female
Max. Charging Voltage (V)8.4
Max. Discharging Voltage (V)5.8
Charging Current1C
Length (mm)70
Width (mm)40
Weight (g)117
Model Series2
Shipping Weight0.15 kg
Shipping Dimensions18 × 7 × 5 cm

What's in the box

  • 1 x Pro-Range A Grade NMC N18650CP 7.4V 3350mAh 3C 2S1P (TX) Li-ion Battery Pack

Frequently Asked Questions

What voltage does this battery pack deliver?
It has a 7.4V nominal voltage, charges to a maximum of 8.4V and should not be discharged below 5.8V.
Does the pack have a built-in BMS?
No. The pack has no BMS, so overcharge, over-discharge and short-circuit protection must be provided by your charger, ESC or a separate protection board.
What connectors are on the pack?
Charging uses a 3-pin JST XH connector, and discharge uses a 2-pin JST RCY BEC female port.
At what current should I charge it?
Charging is specified at 1C, with a maximum charging voltage of 8.4V, using a charger suited to 2S lithium-ion packs.
What is included with the battery?
The package contains one Pro-Range A Grade NMC N18650CP 7.4V 3350mAh 3C 2S1P (TX) Li-ion Battery Pack.
How should I store and care for the pack?
Keep it away from heat and metal objects, avoid charging above 8.4V or discharging below 5.8V, and store it at a partial charge.

Overview

The Pro-Range A Grade NMC N18650CP is a two-cell lithium-ion battery pack arranged in a 2S1P layout. Two 18650 cells sit in series to produce a 7.4V nominal output, while the parallel count of one keeps the pack compact and the capacity at 3350mAh. The result is a rectangular block measuring 70 mm long and 40 mm wide, weighing 117 g, which suits builds where a cylindrical cell holder would take up too much room.

The pack is aimed at users who need a rechargeable 2S li-ion supply with defined connectors rather than bare wires. It carries a 3-pin JST XH connector for charging and a 2-pin JST RCY BEC female port for discharge, so it mates with matching leads already common in small RC and portable electronics projects.

Key Features

  • 2S1P li-ion construction: 7.4V nominal from two series 18650 cells with a single parallel string.
  • 3350mAh capacity: a useful reserve for small models and handheld devices.
  • 3C continuous discharge: supports sustained current draw above a basic 1C cell rating.
  • Defined connector set: JST XH for charging and JST RCY BEC female for discharge.
  • Compact and light: 70 x 40 mm and 117 g keeps the pack easy to mount.
  • No integrated BMS: the pack relies on your own protection and balancing setup.

Specifications Explained

Voltage window

Nominal voltage is 7.4V, with a maximum charging voltage of 8.4V and a maximum discharging voltage of 5.8V. Treat those figures as the operating limits: charge no higher than 8.4V and stop discharge before the pack falls below 5.8V.

Capacity and current

At 3350mAh, the pack stores a moderate amount of energy for its size. The 3C continuous discharge rating describes how much current the cells can deliver steadily, while charging is specified at 1C. Match your charger and load to those ratings rather than exceeding them.

Connectors and format

The 3-pin JST XH charge connector and 2-pin JST RCY BEC female discharge port define how the pack connects. Because there is no BMS on board, overcharge, over-discharge and short-circuit protection must come from your charger, ESC or a separate protection board.

Compatibility and Requirements

Use a charger suited to 2S lithium-ion packs that can work to an 8.4V maximum and respect the 1C charge rate. The discharge lead must terminate in a matching 2-pin JST RCY male plug, and the charge lead in a matching 3-pin JST XH connector. Since the pack has no BMS, add external protection appropriate to your application and never rely on the pack itself to cut off current.

Typical Uses

The 2S1P format and 3C rating suit small RC models, FPV accessories, portable instruments, sensor nodes and DIY electronics that expect a 7.4V li-ion supply. The compact 70 x 40 mm body fits enclosed builds where a larger pack will not.

What's in the Box

One Pro-Range A Grade NMC N18650CP 7.4V 3350mAh 3C 2S1P (TX) Li-ion Battery Pack.

Quick specs

Nominal Voltage (V)
7.4
Nominal Capacity (mAh)
3350 mAh
Continuous Discharge Current (A)
3C
BMS (Y/N)
N
Charge Connector
3 Pin JST XH
Discharge Port
2 Pin JST RCY BEC Female
See all specifications