Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A matched 1CW+1CCW pair of 11-inch, 4.7-pitch ABS propellers weighing about 24 g each. Includes 3, 4, 5 and 6 mm reducers to fit common motor shafts.

Key Highlights

  • 11-inch diameter with 4.7-inch pitch for multicopter thrust
  • Lightweight ABS construction at approximately 24 g per propeller
  • Includes one clockwise and one counter-clockwise propeller
  • 7.4 mm shaft bore with 3, 4, 5 and 6 mm plastic reducers
  • Two-blade design for efficient airflow
  • Black finish for a clean, low-profile look

Ideal For

  • DIY multicopter builders using 11-inch propellers
  • Drone hobbyists replacing a worn or damaged propeller pair
  • Pilots building a multirotor that needs a CW and CCW pair
  • Makers adapting propellers to 3, 4, 5 or 6 mm motor shafts

Buying Tip

Confirm your motor shaft diameter matches one of the included 3, 4, 5 or 6 mm reducers before ordering, and check that your frame has clearance for 11-inch propellers.

Elecvora expert review

Our verdict

A practical, lightweight 11-inch propeller pair for multicopter builds, with useful reducer sizes included. The ABS construction and simple two-blade design make it a sensible choice for DIY projects that need a matched CW/CCW set.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Matched CW and CCW pair included
  • Lightweight at about 24 g per propeller
  • Reducers in four sizes for flexible shaft fitting
  • ABS material balances lightness and rigidity

Cons

  • Only one pair per pack, so spare props are not included
  • ABS may not suit every high-load application compared with stiffer materials

Best for

Multicopter builders needing a lightweight 11-inch CW/CCW propeller pair

Not ideal for

Pilots who need a large number of spare propellers in one purchase

Specifications

Prop. Diameter (inch)11
MaterialABS
ColorBlack
Rotation DirectionCCW, CW
Shaft Diameter7.4 mm
No. of Blades2
Pitch(inch)4.7
Rotation1CW+1CCW
Length (mm)280
Plastic Reducers3, 4, 5, 6
Weight (g)24
Shipping Weight0.027 kg
Shipping Dimensions29 × 6 × 1 cm

What's in the box

  • 1 x Counter-Clockwise (CCW) Propeller 1147 (11x4.7)
  • 1 x Clockwise (CW) Propeller 1147 (11x4.7)
  • A set of propeller reducers (3, 4, 5 and 6 mm)

Frequently Asked Questions

What is included in the package?
You receive one CCW propeller, one CW propeller, and a set of plastic reducers in 3, 4, 5 and 6 mm sizes.
What size motor shaft will these propellers fit?
The propeller bore is 7.4 mm, and the included reducers allow fitting to 3, 4, 5 or 6 mm motor shafts. Check your motor shaft diameter against these sizes.
Are these propellers suitable for my multicopter?
They are intended for multicopters and drones that use 11-inch, two-blade propellers with a CW/CCW pair. Confirm your frame has clearance for 11-inch propellers and that your motor shaft matches one of the reducer sizes.
How much does each propeller weigh?
Each propeller weighs approximately 24 g.
Do I need to balance the propellers before use?
Balancing is good practice for multicopter propellers. Check that the propeller rotates freely and shows no visible damage before flight.
How should I care for these propellers?
Inspect the blades for cracks or deformation after any hard landing or impact, and replace damaged propellers. Store them away from excessive heat.

Overview

The Pro-Range 1147 (11x4.7) ABS Black Propellers are a matched pair of two-blade propellers intended for multicopters and drones. The set includes one clockwise (CW) and one counter-clockwise (CCW) propeller, giving you the correct rotation pair for a multirotor setup. At 11 inches in diameter with a 4.7-inch pitch, these propellers are sized for larger airframes that benefit from a broader disc area. Each propeller weighs approximately 24 g, keeping the rotating mass modest while the ABS material provides a useful balance of lightness and rigidity.

Key Features

  • Matched rotation pair: One CW and one CCW propeller are included so you can install them correctly on your multirotor.
  • 11-inch diameter, 4.7-inch pitch: A common size for multicopter builds that need a larger propeller disc.
  • ABS construction: Durable plastic that keeps the propeller light without feeling fragile.
  • 7.4 mm shaft bore: The central mounting hole is sized at 7.4 mm.
  • Included reducers: Plastic reducers in 3, 4, 5 and 6 mm help adapt the bore to different motor shaft diameters.
  • Two-blade design: A straightforward blade profile for multicopter use.

Specifications Explained

Diameter and pitch: The 11-inch diameter describes the circle swept by the blades, while the 4.7-inch pitch indicates how far the propeller would theoretically advance in one revolution. Together they define the propeller's size class and its general thrust characteristics.

Shaft diameter and reducers: The propeller has a 7.4 mm bore, and the included 3, 4, 5 and 6 mm plastic reducers let you step down the opening to match a range of motor shaft sizes. This makes it easier to mount the propellers on different motors without needing separate adapter rings.

Weight: At roughly 24 g per propeller, the pair adds little weight to the airframe. Lower rotating mass can help keep the multicopter responsive.

Material and colour: ABS plastic gives the propeller its structure, and the black finish keeps the appearance understated.

Compatibility and Requirements

These propellers are intended for multicopters and drones that use 11-inch, two-blade propellers with a CW/CCW rotation pair. The 7.4 mm shaft bore, together with the supplied 3, 4, 5 and 6 mm reducers, allows fitting to motor shafts within those sizes. Check that your motor shaft matches one of the reducer sizes and that your airframe can accommodate an 11-inch propeller before installation. No other compatibility details are specified.

Typical Uses

These propellers suit multicopter builds and drone projects where an 11-inch propeller is appropriate. They can be used as replacements for an existing set or as part of a new DIY build. The matched CW and CCW pair makes them convenient for multirotor configurations that require opposite rotation directions.

What's in the Box

  • 1 x Counter-Clockwise (CCW) Propeller 1147 (11x4.7)
  • 1 x Clockwise (CW) Propeller 1147 (11x4.7)
  • A set of propeller reducers (3, 4, 5 and 6 mm)

Quick specs

Prop. Diameter (inch)
11
Material
ABS
Color
Black
Rotation Direction
CCW, CW
Shaft Diameter
7.4 mm
No. of Blades
2
See all specifications