
1 / 3 · Click to enlarge
AI Summary
An 11-inch two-blade carbon nylon propeller pair in black, supplied as one CW and one CCW prop with a 7.6 mm shaft bore. The stiff yet flexible blades and included reducers make it a straightforward choice for multicopter builds and spares.
Key Highlights
- 11-inch diameter with 4.7-inch pitch for larger multicopter airframes
- Carbon nylon construction in black for a stiff, lightweight blade
- Two-blade design, supplied as one CW and one CCW propeller
- 7.6 mm shaft bore with reducers included for hub adaptation
- Approximately 30 g per propeller for a low rotating mass
- Swept tip profile aimed at aerodynamic efficiency and stable lift
Ideal For
- DIY multicopter builders working with 11-inch propeller setups
- Drone makers assembling larger airframes for aerial photography
- Hobbyists replacing worn or damaged 11-inch propellers
- Makers who need matched CW and CCW pairs with shaft reducers
Buying Tip
Confirm your motor shaft size against the 7.6 mm bore and test-fit the supplied reducers before mounting, since the correct adapter is what keeps the propeller centred and balanced.
Elecvora expert review
Our verdict
A sensible, no-fuss propeller pair for larger multicopters: stiff carbon nylon blades, a matched CW and CCW set and reducers in the pack. It is a component for builders rather than a plug-and-play upgrade, so check your shaft and clearance first.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Matched CW and CCW pair in one pack
- Light at around 30 g per propeller
- Carbon nylon gives stiffness with some flexibility
- Reducers included for different shaft sizes
- Large 11-inch disc for lift-focused builds
Cons
- No motor or mounting hardware included
- Only one pair per pack, so a quad needs multiple packs
- Requires checking shaft fit and frame clearance before use
Best for
Multicopter builders and DIY drone makers using 11-inch propellers
Not ideal for
Ready-to-fly owners who do not know their motor shaft or frame size
Specifications
| Prop. Diameter (inch) | 11 |
|---|---|
| Material | Carbon Nylon |
| Color | Black |
| Rotation Direction | CCW, CW |
| Shaft Diameter | 7.6 mm |
| No. of Blades | 2 |
| Pitch(inch) | 4.7 |
| Rotation | 1CW+1CCW |
| Length (mm) | 280 |
| Weight (g) | 30 |
| Shipping Weight | 0.033 kg |
| Shipping Dimensions | 29 × 6 × 1 cm |
What's in the box
- 1 x Counter-Clockwise (CCW) Propeller 1147 (11x4.7)
- 1 x Clockwise (CW) Propeller 1147 (11x4.7)
- 1 x Set of prop reducers
Frequently Asked Questions
What is included in one pack?
Will these fit my motor?
What does 11x4.7 mean?
How much does each propeller weigh?
Can I use these on any multicopter?
How should I care for the propellers?
Overview
The Pro-Range Propellers 1147 is a two-blade propeller set for multicopters, moulded in black carbon nylon. Each pair contains one clockwise and one counter-clockwise propeller, so a single pack gives you the matched rotation pair needed on a multirotor airframe. At 11 inches in diameter with a 4.7-inch pitch, these blades sit in the larger-propeller class, where a longer disc area is used to move air efficiently at lower rotational speeds.
Each propeller weighs around 30 g and measures roughly 280 mm in length. The carbon nylon material is chosen to combine lightness with rigidity, while retaining enough flexibility to cope with the knocks that come with regular flying and handling. The hub is bored to 7.6 mm, and a set of prop reducers is included so you can adapt the mounting to different shaft sizes.
Key Features
- 11 x 4.7 geometry: a large-diameter, moderate-pitch blade intended for multicopter lift.
- Carbon nylon build: stiff and light, with flexibility for impact tolerance.
- Matched pair: one CW and one CCW propeller in every pack.
- 7.6 mm shaft bore: with reducers supplied for hub adaptation.
- Swept tip design: shaped to support air-powered efficiency and aerofoil stability.
- Light rotating mass: about 30 g per propeller.
Specifications Explained
Diameter and pitch are the two numbers that define how a propeller behaves. The 11-inch diameter describes the circle the blades sweep, while the 4.7-inch pitch describes the theoretical forward travel per revolution. Together they indicate a propeller built for lift and endurance on larger frames rather than for very high-speed flight.
Shaft diameter is 7.6 mm at the hub bore. Because motor shafts vary, the included reducers let you step the mounting down to suit your setup. Check your motor shaft and adapter before fitting.
Blade count and weight matter for response and balance. Two blades keep the propeller simple and light at around 30 g each, which helps reduce the load on the motor and keeps the rotating assembly easier to balance.
Compatibility and Requirements
These propellers are intended for multicopters that accept an 11-inch, two-blade propeller with a 7.6 mm hub bore and a 4.7-inch pitch. You will need a motor and mounting hardware suited to the shaft size, and the reducers should be selected to match your motor shaft. Always confirm that the propeller diameter clears your frame, arms and any payload before installation.
Typical Uses
Typical applications include DIY multicopter builds, aerial photography platforms and general drone projects where a larger, efficient propeller is wanted. They also work as replacement spares for existing 11-inch setups. Because each pack contains a matched CW and CCW pair, they suit airframes that use counter-rotating propeller pairs.
What's in the Box
- 1 x Counter-Clockwise (CCW) Propeller 1147 (11x4.7)
- 1 x Clockwise (CW) Propeller 1147 (11x4.7)
- 1 x Set of prop reducers
Note: propeller dimensions and weight may vary by approximately ±2%.
Quick specs
- Prop. Diameter (inch)
- 11
- Material
- Carbon Nylon
- Color
- Black
- Rotation Direction
- CCW, CW
- Shaft Diameter
- 7.6 mm
- No. of Blades
- 2



















