
1 / 3 · Click to enlarge
AI Summary
Pro-Range 1347 carbon nylon propellers, 13x4.7 inch, come as a 1CW+1CCW pair with six plastic reducers for versatile motor shaft fitting. Their lightweight, rigid build improves aerodynamic efficiency and stability for multicopters.
Key Highlights
- 13-inch diameter with 4.7-inch pitch for balanced thrust and efficiency
- Carbon nylon construction for lightweight strength and impact resistance
- Includes one CW and one CCW propeller for a complete motor pair
- Six plastic reducers (3, 3.17, 4, 5, 6, 8 mm) fit various shaft sizes
- 9.5 mm shaft diameter and 15-degree tip design reduce vortex formation
- Each propeller weighs only 50 grams for minimal rotational inertia
Ideal For
- DIY multicopter builders using 13-inch propellers
- Drone enthusiasts maintaining larger airframes
- Aerial photography platforms requiring efficient thrust
- Hobbyists experimenting with different propeller sizes
Buying Tip
Verify your motor shaft diameter matches one of the included reducers (3, 3.17, 4, 5, 6, or 8 mm) and that your frame can accommodate 13-inch propellers before purchasing.
Elecvora expert review
Our verdict
The Pro-Range 1347 propellers offer a solid balance of strength and lightness for multicopter use. The included reducer set adds versatility, making them a convenient choice for various motor shafts.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Lightweight carbon nylon construction
- Includes CW and CCW pair
- Six reducers for multiple shaft sizes
- Aerodynamic tip design for stability
Cons
- Dimensions and weight may vary by ±2%
- Reducers may wear over time and need replacement
- Not suitable for motors with shaft diameters outside the provided reducer range
Best for
Multicopter builders needing a reliable 13-inch propeller pair with adaptable shaft fitting.
Not ideal for
Pilots requiring propellers for motors with shaft diameters beyond 9.5 mm or outside the reducer sizes.
Specifications
| Prop. Diameter (inch) | 13 |
|---|---|
| Rotation Direction | CCW, CW |
| Shaft Diameter | 9.5 mm |
| Rotation | 1CW+1CCW |
| Length (mm) | 324 |
| Plastic Reducers | 3, 3.17, 4, 5, 6, 8 |
| Weight (g) | 50 |
| Shipping Weight | 0.055 kg |
| Shipping Dimensions | 30 × 4 × 2 cm |
What's in the box
- 1 x Counter-Clockwise (CCW) Propeller 1347 (13x4.7)
- 1 x Clockwise (CW) Propeller 1347 (13x4.7)
- 1 x Set of Prop Reducers (3, 3.17, 4, 5, 6, 8 mm)
Frequently Asked Questions
What is included in the package?
Will these propellers fit my motor?
Are these propellers suitable for high-power setups?
How do I maintain these propellers?
Can I use these on a plane?
What is the weight of each propeller?
Overview
The Pro-Range 1347 is a pair of 13-inch propellers engineered for multicopters and drones. Each pair contains one clockwise and one counter-clockwise propeller, so you can set up a motor pair right away. The carbon nylon material gives these blades a light yet rigid feel, helping them handle the demands of multirotor flight. With a 13-inch diameter and 4.7-inch pitch, they are suited to larger airframes that need a balance of lift and efficiency. The propellers come with a set of plastic reducers in six sizes, allowing you to adapt them to different motor shaft diameters. Whether you are assembling a DIY drone or replacing worn props, these offer a straightforward solution.
Key Features
- Carbon nylon build: Provides a strong, lightweight structure that resists flex under load.
- Complete pair: Includes one CW and one CCW propeller for a single motor pair.
- Reducer set included: Six plastic reducers (3, 3.17, 4, 5, 6, and 8 mm) help fit various shaft sizes.
- Aerodynamic tip design: The 15-degree angle at the blade tip is intended to reduce vortex formation and improve stability.
- Lightweight: At 50 grams per propeller, they keep rotational mass low for responsive control.
Specifications Explained
13-inch diameter and 4.7-inch pitch: The diameter determines the disc area, while the pitch indicates how far the propeller would move forward in one revolution. Together, they influence thrust, efficiency, and power draw. This size is typically used on larger multicopters where higher thrust is needed.
9.5 mm shaft diameter: This is the central bore size of the propeller hub. The included reducers let you step down to smaller motor shafts, ensuring a snug fit. Always match the reducer to your motor shaft for secure mounting.
Rotation direction: The pair includes one clockwise and one counter-clockwise propeller. This is essential for counteracting torque in multirotor designs.
Weight: At 50 grams each, these propellers are light enough to reduce inertia but still sturdy for general use.
Compatibility and Requirements
These propellers are designed for multicopters and drones that accept 13-inch propellers with a 9.5 mm shaft bore. The included plastic reducers allow fitting to motor shafts of 3, 3.17, 4, 5, 6, or 8 mm. Ensure your motor’s shaft diameter matches one of these sizes and that your frame has sufficient clearance for 13-inch propellers. Always check rotation direction and balance before flight.
Typical Uses
These propellers are suitable for DIY multicopter builds, aerial photography platforms, and general drone maintenance. They can be used on larger quadcopters or hexacopters where 13-inch props are appropriate. The carbon nylon construction makes them a practical choice for everyday flying and experimentation.
What's in the Box
- 1 x Counter-Clockwise (CCW) Propeller 1347 (13x4.7)
- 1 x Clockwise (CW) Propeller 1347 (13x4.7)
- 1 x Set of Prop Reducers (3, 3.17, 4, 5, 6, 8 mm)
Quick specs
- Prop. Diameter (inch)
- 13
- Rotation Direction
- CCW, CW
- Shaft Diameter
- 9.5 mm
- Rotation
- 1CW+1CCW
- Length (mm)
- 324
- Plastic Reducers
- 3, 3.17, 4, 5, 6, 8



















