
1 / 3 · Click to enlarge
AI Summary
Pro-Range 5030 polycarbonate propellers in black, supplied as 2CW and 2CCW for 5-inch multirotors. The 5x3.0 size and 5 mm shaft fit make them a practical, lightweight choice for FPV and general drone use.
Key Highlights
- 5-inch diameter with 3-inch pitch for multirotor thrust
- Durable polycarbonate construction in black finish
- Includes two clockwise and two counter-clockwise props
- 5 mm shaft diameter for common motor setups
- Lightweight at just 0.02 kg shipping weight
- 125 mm length suits compact 5-inch frames
Ideal For
- FPV pilots building or maintaining 5-inch quads
- Multirotor hobbyists needing a complete 2CW+2CCW set
- Drone users looking for lightweight polycarbonate props
- Makers sourcing 5x3.0 props with a 5 mm shaft fit
Buying Tip
Confirm your motor shaft diameter is 5 mm and that your frame clears 5-inch props before ordering this set.
Elecvora expert review
Our verdict
The Pro-Range 5030 set offers a straightforward solution for 5-inch multirotor builds, with a complete CW/CCW pairing and a lightweight polycarbonate construction. It is a practical choice for pilots who need a reliable replacement or spare set without overcomplicating the spec sheet.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Complete 2CW+2CCW set for four-motor builds
- Lightweight polycarbonate construction
- Common 5x3.0 size and 5 mm shaft diameter
- Black finish suits most builds
Cons
- No adapters or mounting hardware included
- Suitable only for setups that accept 5-inch props with a 5 mm shaft
Best for
Pilots maintaining or building 5-inch multirotors who need a basic, lightweight prop set
Not ideal for
Crafts requiring different prop sizes or non-5 mm shaft mounting
Specifications
| Prop. Diameter (inch) | 5 |
|---|---|
| Material | Polycarbonate |
| Color | Black |
| Rotation Direction | CCW, CW |
| Rotation | 2CW+ 2CCW |
| Pitch(inch) | 3 |
| Shaft Diameter | 5 mm |
| Length (mm) | 125 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 22 × 6 × 2 cm |
What's in the box
- 2 x CW propeller
- 2 x CCW propeller
Frequently Asked Questions
What is included in this propeller set?
Will these fit my motors?
What size are these propellers?
Are these props suitable for FPV flying?
How should I care for these propellers?
Overview
The Pro-Range 5030 is a set of four polycarbonate propellers intended for multirotor and drone use. Each propeller measures 5 inches in diameter with a 3-inch pitch, and the set includes two clockwise (CW) and two counter-clockwise (CCW) units. The black polycarbonate build keeps weight low while providing the stiffness needed for stable flight. With a 5 mm shaft diameter and 125 mm length, these props are aimed at 5-inch class builds where a balanced mix of efficiency and response is desired.
Key Features
- 5x3.0 size: A 5-inch diameter and 3-inch pitch that suit a wide range of multirotor setups.
- Polycarbonate material: Offers a useful combination of rigidity and impact resistance for everyday flying.
- Complete rotation set: Two CW and two CCW propellers allow a standard four-motor configuration without buying extra pairs.
- 5 mm shaft diameter: Matches common motor shaft sizes found on many 5-inch builds.
- Lightweight design: Low mass helps reduce rotational inertia and keeps the craft responsive.
- Black finish: A neutral look that pairs easily with most frames and builds.
Specifications Explained
Diameter and pitch: The 5-inch diameter defines the overall disc size, while the 3-inch pitch indicates how far the prop would theoretically advance in one revolution. Together, the 5x3.0 combination is a moderate-pitch setup that can deliver a balance of thrust and flight time.
Shaft diameter: The 5 mm bore is the mounting dimension that must match your motor shaft. Check your motors before installation to confirm a proper fit.
Rotation direction: The set includes two CW and two CCW propellers, which is the standard pairing for a four-motor multirotor. The direction markings should be observed during installation to ensure correct thrust.
Material: Polycarbonate is chosen for its toughness and resistance to cracking under normal use, while remaining light enough for flight performance.
Compatibility and Requirements
These propellers are intended for multirotors that accept 5-inch props with a 5 mm shaft diameter. The 2CW+2CCW set supports a standard four-motor layout. No additional hardware or adapters are listed; installation depends on your motor’s shaft and mounting method. Always verify that your frame and motor combination can accommodate 5-inch propellers and that the rotation directions match your flight controller setup.
Typical Uses
These props are suitable for general drone and multirotor flying, including FPV practice, camera platform maintenance, and recreational builds. The 5x3.0 size is often used where a moderate pitch is preferred for controllable thrust. Because the set includes both rotation directions, it can serve as a direct replacement set for a four-motor craft or as spares for future needs.
What's in the Box
The package contains four propellers: two clockwise and two counter-clockwise units. No other accessories are indicated in the product data.
Quick specs
- Prop. Diameter (inch)
- 5
- Material
- Polycarbonate
- Color
- Black
- Rotation Direction
- CCW, CW
- Rotation
- 2CW+ 2CCW
- Pitch(inch)
- 3



















