Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A four-piece set of transparent 5.1x5.2 inch polycarbonate propellers with two CW and two CCW blades and a 5 mm shaft bore. Lightweight two-blade design gives quick throttle response for 5-inch FPV builds.

Key Highlights

  • 5.1 inch diameter with 5.2 inch pitch for fast multirotor setups
  • Two-blade HD Hyper Drive profile with low rotating mass
  • Polycarbonate construction balances lightness with bending resistance
  • 5 mm shaft bore fits matching motor shafts
  • Set includes 2 CW and 2 CCW props for one quad
  • Transparent finish for easy inspection and orientation checks

Ideal For

  • FPV racing pilots flying 5-inch class quads
  • Freestyle pilots who prefer light two-blade props
  • Builders maintaining a spare set of 5.1x5.2 props
  • Makers assembling multirotors with 5 mm shaft motors
  • Pilots who want a transparent prop for easy inspection

Buying Tip

Measure your motor shaft and confirm it is 5 mm, and check that your frame has clearance for 5.1 inch blades before ordering this set.

Elecvora expert review

Our verdict

A sensible, low-cost four-prop set for 5-inch FPV pilots who want a light two-blade disc and a transparent blade that is easy to inspect. The polycarbonate build and 5 mm bore keep things simple, provided your motors match.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Two CW and two CCW props in one pack
  • Light 23 g total weight for four props
  • Polycarbonate blades resist bending
  • Transparent colour aids pre-flight checks
  • Straightforward 5 mm shaft fitment

Cons

  • Two-blade design offers less low-end grip than tri-blade props
  • No mounting hardware listed in the pack
  • Bore size limits use to 5 mm shaft motors

Best for

Fast 5-inch FPV racing and freestyle builds with 5 mm shaft motors

Not ideal for

Pilots needing three-blade grip or motors with a different shaft diameter

Specifications

Prop. Diameter (inch)5.1
MaterialPolycarbonate
Rotation DirectionCCW, CW
Rotation2CW+ 2CCW
No. of Blades2
Shaft Diameter5 mm
Pitch(inch)5.2
Length (mm)130
Propeller TypeHD (Hyper Drive)
Weight (g)23 (for 4 Props)
ColorTransparent
Shipping Weight0.03 kg
Shipping Dimensions13 × 5 × 1 cm

What's in the box

  • 2 x Pro-Range 5152 Flash propeller, CW, transparent
  • 2 x Pro-Range 5152 Flash propeller, CCW, transparent

Frequently Asked Questions

How many propellers are included?
The pack contains four propellers: two clockwise and two counter-clockwise, all in transparent polycarbonate.
What size motors do these fit?
They have a 5 mm shaft bore, so they fit motors with a 5 mm shaft. Check your motor specification before ordering.
What is the difference between the 5.1 inch diameter and 5.2 inch pitch?
Diameter is the overall blade span at 5.1 inches, while pitch is 5.2 inches, describing the theoretical forward travel per revolution.
Can I use these on a 5-inch frame?
They are 5.1 inch props, so confirm your frame and motor spacing allow clearance for the slightly larger span before flying.
Do I need any extra parts to mount them?
No mounting hardware is listed with this set, so use the prop nuts or fixings that came with your motors.
How should I care for polycarbonate props?
Inspect blades after any impact and replace any that are cracked, bent or whitened, and store them away from heat and direct sun.

Overview

The Pro-Range 5152 Flash is a transparent two-blade propeller set built for 5-inch class multirotors. Each propeller measures 5.1 inches across with a 5.2 inch pitch, and the four-prop pack is split into two clockwise and two counter-clockwise blades so a single quad can be equipped in one go. Polycarbonate gives the blades a useful balance of light weight and rigidity, and the total weight of all four props is around 23 g.

Key Features

  • Balanced four-prop pack: two CW and two CCW blades included, matching the rotation needs of a standard quad.
  • HD Hyper Drive profile: a two-blade shape intended for high-speed multirotor flying.
  • Polycarbonate blades: chosen for lightness with good dash and bending resistance.
  • 5 mm shaft bore: a common bore size that simplifies matching to motor shafts.
  • Transparent finish: helps you spot cracks, chips and blade orientation at a glance.

Specifications Explained

Diameter and pitch: at 5.1 inches diameter and 5.2 inches pitch, these props sit in the 5-inch class. Pitch describes the theoretical forward travel per revolution, so a higher pitch value generally means more speed potential and more load on the motor compared with a lower-pitch prop of similar size.

Blade count: two blades keep the disc light and reduce inertia, which is why two-blade props are common on fast FPV builds. The trade-off is generally less low-end grip than a three-blade design.

Shaft diameter: the 5 mm bore must match your motor shaft. Check your motor before ordering, since a mismatched bore will not mount safely.

Weight: roughly 23 g for all four props means each blade is very light, supporting quick spin-up and crisp throttle response.

Compatibility and Requirements

These propellers require motors with a 5 mm shaft and a frame that accepts 5.1 inch props. The set provides two CW and two CCW blades, so you will need a flight setup that uses counter-rotating pairs. Mounting hardware is not listed, so use the fixings supplied with your motors. Always confirm clearance between the blade tips and your frame arms before spinning up.

Typical Uses

The Flash series is aimed at high-speed racing and fast freestyle multirotors in the 5-inch class. Pilots who prefer a light two-blade disc for quick throttle changes will find this set a practical choice, and the transparent colour is handy for pre-flight checks and for keeping blade orientation clear.

What's in the Box

  • 2 x Pro-Range 5152 Flash propeller, CW, transparent
  • 2 x Pro-Range 5152 Flash propeller, CCW, transparent

Quick specs

Prop. Diameter (inch)
5.1
Material
Polycarbonate
Rotation Direction
CCW, CW
Rotation
2CW+ 2CCW
No. of Blades
2
Shaft Diameter
5 mm
See all specifications