Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A two-pair pack of 5.1-inch tri-blade polycarbonate propellers in orange, supplied as 2CW and 2CCW. Their lightweight 27 g build and inverse tip design support fast throttle response on racing multirotors.

Key Highlights

  • 5.1-inch tri-blade design with 5.5-inch pitch for fast racing multirotors
  • Polycarbonate construction offers rigidity with bending resistance
  • Inverse tip profile helps reduce blade tip vortex
  • Lightweight 27 g per propeller for low rotational inertia
  • 5 mm shaft hole fits matching brushless motor shafts
  • Bright orange colour for easy visual tracking in flight

Ideal For

  • FPV racing pilots flying 5-inch-class multirotors
  • DIY builders assembling 130 mm and 140 mm FPV frames
  • Pilots using RS2306 or GT2205 brushless motors
  • Flyers who want a visible orange spare propeller set

Buying Tip

Check that your motor shafts are 5 mm and that your frame has clearance for 5.1-inch propellers before ordering this set.

Elecvora expert review

Our verdict

A sensible, affordable spare set for fast 5-inch-class racing builds, with a matched CW and CCW pair and a light polycarbonate body. The orange finish and inverse tip design make it a practical choice for pilots who want quick response and easy visibility.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Lightweight 27 g per propeller for fast throttle response
  • Matched 2CW and 2CCW set covers a full quad
  • Polycarbonate offers rigidity with bending resistance
  • Bright orange improves in-flight visibility

Cons

  • Pitch and diameter suit racing rather than long-range cruising
  • Requires a 5 mm shaft hole match, so check your motors first
  • No mounting hardware listed in the pack

Best for

FPV racing pilots and DIY builders on 130 mm to 140 mm frames

Not ideal for

Pilots needing propellers with a shaft hole other than 5 mm

Specifications

Prop. Diameter (inch)5.1
MaterialPolycarbonate
Rotation DirectionCCW, CW
Rotation2CW+2CCW
No. of Blades3
Length (cm)12.95
Shaft Hole Diameter5 mm
Pitch(inch)5.5
Propeller TypeHD (Hyper Drive)
Weight (g)27
ColorOrange
Shipping Weight0.03 kg
Shipping Dimensions20 × 20 × 3 cm

What's in the box

  • 2 x Pro-Range 5152 Tri-Blade Flash Propellers CW, Orange
  • 2 x Pro-Range 5152 Tri-Blade Flash Propellers CCW, Orange

Frequently Asked Questions

How many propellers are in the pack?
The pack contains four propellers: two clockwise and two counter-clockwise, all in orange.
What size shaft hole do these propellers have?
They use a 5 mm shaft hole, so your motor shafts should match that diameter.
Which motors are these compatible with?
They are listed as compatible with RS2306 and GT2205 brushless motors, and suit FPV 130 mm and 140 mm frames.
What is the propeller diameter and pitch?
Each propeller is 5.1 inches in diameter with a 5.5-inch pitch and three blades.
What material are the propellers made from?
They are made from polycarbonate, which provides a balance of stiffness and bending resistance.
How should I care for these propellers?
Inspect them after landings for cracks or bends, keep them clean, and replace any damaged propeller before flying again.

Overview

The Pro-Range 5152 Tri-Blade Flash propeller set is a practical spare or upgrade option for pilots running fast multirotors. Each propeller measures 5.1 inches in diameter with a 5.5-inch pitch and uses three blades to generate thrust. The pack contains four propellers in total: two clockwise and two counter-clockwise units, all finished in a high-visibility orange.

Polycarbonate is used for the blades, giving a balance of stiffness and bending resistance that suits regular flight and the occasional rough landing. At 27 g per propeller, the set keeps rotational mass low, which supports quick throttle changes.

Key Features

  • Tri-blade layout: three blades per propeller for thrust across a compact 5.1-inch diameter.
  • Inverse tip design: shaped to reduce blade tip vortex and support smooth turning performance.
  • Lightweight build: 27 g per propeller keeps moment of inertia low for fast response.
  • Durable material: polycarbonate provides dash and bending resistance.
  • Matched rotation set: two CW and two CCW propellers in one pack.
  • Orange finish: easy to spot against sky, grass and track markers.

Specifications Explained

Diameter and pitch: the 5.1-inch diameter and 5.5-inch pitch define how much air the propeller moves per revolution. A higher pitch generally favours speed, which is why this set is intended for fast racing multi-copters.

Blade count: three blades provide a balance between thrust and drag, a common choice for racing and freestyle quads.

Shaft hole: the 5 mm bore must match your motor shaft diameter; check this before fitting.

Weight: at 27 g per propeller, the set is light enough to respond quickly to throttle input while remaining rigid in the air.

Rotation: the pack includes both CW and CCW propellers so a complete quad can be fitted from one set.

Compatibility and Requirements

These propellers use a 5 mm shaft hole and are listed as suitable for FPV 130 mm and 140 mm frames. They are also noted as compatible with RS2306 and GT2205 brushless motors. Always confirm your motor shaft diameter and frame clearance before installation.

Typical Uses

Suited to high-speed racing multi-copters, FPV builds on 130 mm and 140 mm frames, and DIY makers assembling or refreshing a quad. The orange colour helps with orientation and visibility during flight.

What's in the Box

  • 2 x Pro-Range 5152 Tri-Blade Flash Propellers CW, Orange
  • 2 x Pro-Range 5152 Tri-Blade Flash Propellers CCW, Orange

Quick specs

Prop. Diameter (inch)
5.1
Material
Polycarbonate
Rotation Direction
CCW, CW
Rotation
2CW+2CCW
No. of Blades
3
Length (cm)
12.95
See all specifications