Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

Pro-Range 8045 carbon nylon 3D propellers come as a 1CW+1CCW pair with 3, 4, 5 and 6 mm reducers. At about 20 g each, they offer a lightweight, rigid option for 8-inch multi-copters.

Key Highlights

  • 8-inch diameter with 4.5-inch pitch for multi-copter use
  • Carbon nylon construction balances low weight and rigidity
  • Includes one clockwise and one counter-clockwise propeller
  • Plastic reducers in 3, 4, 5 and 6 mm for shaft fitting
  • Each propeller weighs approximately 20 grams
  • Two-blade design with 7.4 mm shaft diameter

Ideal For

  • DIY multi-copter builders using 8-inch propellers
  • Drone enthusiasts looking for a lightweight propeller pair
  • RC hobbyists needing CW and CCW props with reducers
  • Makers upgrading or replacing props on 8-inch class aircraft

Buying Tip

Check your motor shaft diameter against the included 3, 4, 5 and 6 mm reducers to ensure a proper fit before ordering.

Elecvora expert review

Our verdict

The Pro-Range 8045 carbon nylon props offer a practical, lightweight option for 8-inch multi-copters, with a useful reducer set that simplifies mounting. Their two-blade design and moderate pitch make them a sensible choice for general sport and utility builds.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Lightweight at about 20 g per propeller
  • Carbon nylon material for stiffness
  • Includes both CW and CCW props
  • Multiple reducers for shaft compatibility

Cons

  • Only one pair per pack
  • Reducers are plastic and may wear over time

Best for

8-inch multi-copter builds needing a lightweight CW/CCW propeller pair

Not ideal for

Pilots requiring propellers larger than 8 inches or heavy-lift applications

Specifications

Prop. Diameter (inch)8
MaterialCarbon Nylon
ColorBlack
Rotation DirectionCCW, CW
Rotation1CW+1CCW
No. of Blades2
Pitch(inch)4.5
Shaft Diameter7.4 mm
Length (mm)200
Plastic Reducers3, 4, 5, 6
Weight (g)20
Shipping Weight0.022 kg
Shipping Dimensions22 × 4 × 1 cm

What's in the box

  • 1 x Counter-Clockwise (CCW) 8045 (8x4.5) propeller
  • 1 x Clockwise (CW) 8045 (8x4.5) propeller
  • 1 set of propeller reducers (3, 4, 5 and 6 mm)

Frequently Asked Questions

What is included in the package?
You receive one clockwise propeller, one counter-clockwise propeller, and a set of plastic reducers in 3, 4, 5 and 6 mm sizes.
Will these propellers fit my motor?
The propeller has a 7.4 mm shaft diameter, and the included reducers allow fitting to 3, 4, 5 or 6 mm motor shafts. Check your motor shaft size against these options.
Are these propellers suitable for 3D flying?
The product name includes '3D', but the specifications list a standard two-blade design with fixed pitch. For 3D maneuvers, ensure your motor and ESC support bidirectional rotation.
How much does each propeller weigh?
Each propeller weighs approximately 20 grams, as stated in the specifications.
Can I use these on a larger drone?
These are 8-inch propellers intended for multi-copters designed for that size. Using them on a larger craft may not provide sufficient thrust or may cause compatibility issues.
How should I care for these propellers?
Inspect them regularly for cracks or damage, keep the reducers clean, and replace any propeller that shows signs of wear or impact.

Overview

The Pro-Range 8045 Carbon Nylon 3D propellers are a two-blade pair intended for multi-copters and drones. Each propeller measures 8 inches in diameter with a 4.5-inch pitch, and the set provides one clockwise and one counter-clockwise unit so you can equip a motor pair. Made from carbon nylon, the props are light at roughly 20 grams each while remaining rigid enough for regular flight use.

Key Features

  • Carbon nylon build: Combines low weight with stiffness for responsive multi-copter performance.
  • 8x4.5 size: An 8-inch diameter and 4.5-inch pitch suit a range of multi-rotor setups.
  • Complete rotation pair: One CW and one CCW propeller are included for counter-rotating motor pairs.
  • Reducer set included: Plastic reducers in 3, 4, 5 and 6 mm help adapt the prop to different shaft sizes.
  • Lightweight: At approximately 20 g per propeller, the pair adds minimal mass to your build.

Specifications Explained

Diameter and pitch: The 8-inch diameter defines the swept area, while the 4.5-inch pitch indicates the theoretical forward travel per revolution. Together they describe the propeller's balance of thrust and speed for an 8-inch class multi-copter.

Material: Carbon nylon is used for the blades, giving the propeller a light yet stiff character that helps maintain shape under load.

Shaft and reducers: The propeller has a 7.4 mm shaft diameter. The included plastic reducers (3, 4, 5 and 6 mm) let you match the mounting hole to common motor shaft sizes.

Weight: Each propeller weighs about 20 g, keeping the rotating mass low.

Compatibility and Requirements

These propellers are designed for multi-copters and drones that use 8-inch propellers. The 7.4 mm shaft diameter and the supplied 3, 4, 5 and 6 mm reducers allow fitting to a range of motor shafts. Ensure your motor and frame are appropriate for 8-inch props before installation.

Typical Uses

Ideal for DIY multi-copter builds, drone projects and general RC aircraft requiring an 8-inch propeller. The CW and CCW pair supports standard counter-rotating motor configurations.

What's in the Box

  • 1 x Counter-Clockwise (CCW) 8045 (8x4.5) propeller
  • 1 x Clockwise (CW) 8045 (8x4.5) propeller
  • 1 set of propeller reducers (3, 4, 5 and 6 mm)

Quick specs

Prop. Diameter (inch)
8
Material
Carbon Nylon
Color
Black
Rotation Direction
CCW, CW
Rotation
1CW+1CCW
No. of Blades
2
See all specifications