
1 / 3 · Click to enlarge
AI Summary
This ultra-compact ReadytoSky buck module converts 7-26V input to a stable 5V output at up to 3A with 96% efficiency. Its 3-gram weight and 17.5 x 12 mm size make it ideal for space-constrained RC and FPV builds.
Key Highlights
- Ultra-small 17.5 x 12 mm footprint and only 3 g
- 7-26V input range with fixed 5V output
- Up to 3A output current for receivers and servos
- High 96% conversion efficiency reduces heat
- Low output ripple under 30mV for stable power
- Wide -40 to 85°C operating temperature range
Ideal For
- FPV pilots building compact quads
- RC hobbyists needing a lightweight BEC
- DIY electronics enthusiasts
- Drone builders with limited space
- Makers working on battery-powered projects
Buying Tip
Check that your input voltage stays within 7-26V and your total load does not exceed 3A to avoid overheating or damage.
Elecvora expert review
Our verdict
The ReadytoSky 5V 3A BEC is a solid choice for tight builds where weight and size matter. It delivers clean power with high efficiency, though users should respect the 3A limit.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Extremely small and lightweight
- High efficiency up to 96%
- Low output ripple under 30mV
- Wide input voltage range
Cons
- Requires soldering for connections
- Limited to 3A output
- No adjustable output voltage
Best for
RC and FPV builders needing a compact 5V power source
Not ideal for
Projects requiring more than 3A or adjustable voltage
Specifications
| Model No. / Name | Buck Converter Module |
|---|---|
| Input Voltage (V) | 7 - 26V |
| DC Output Voltage (V) | 5 |
| Conversion efficiency | 96% (Max) |
| Operating Temperature (°C) | -40 to 85 |
| Length (mm) | 17.5 |
| Width (mm) | 12 |
| Weight (g) | 3 |
| Output Ripple | < 30mV |
| Shipping Weight | 0.006 kg |
| Shipping Dimensions | 2 × 2 × 1 cm |
What's in the box
- 1 x Ultra-Small Size DC-DC 5V 3A BEC Power Supply Buck Step Down Module
Frequently Asked Questions
What is the input voltage range of this module?
Can I use this to power a 5V device from a 3S LiPo battery?
What is the maximum output current?
Does the output voltage need adjustment?
What is included in the package?
How do I connect the module?
Overview
The ReadytoSky Ultra-Small DC-DC 5V 3A BEC Buck Step-Down Module is designed for builders who need a reliable 5V power source in a very small package. It takes an input voltage between 7V and 26V and steps it down to a fixed 5V output, delivering up to 3A to connected devices. At just 17.5 mm long, 12 mm wide, and 3 grams, it can be tucked into tight spaces inside RC models, FPV frames, and compact electronic projects.
With a maximum conversion efficiency of 96% and output ripple below 30mV, this module provides clean, stable power while minimizing energy loss. It operates across a wide temperature range of -40 to 85°C, so it can handle demanding environments.
Key Features
- Compact and lightweight: 17.5 x 12 mm dimensions and 3 g weight make it easy to integrate into space-limited builds.
- Wide input range: Accepts 7-26V input, suitable for many battery chemistries and power supplies.
- Fixed 5V output: Provides a stable 5V rail for receivers, flight controllers, servos, and other 5V electronics.
- Up to 3A output: Enough current for typical RC and DIY loads.
- High efficiency: Up to 96% conversion efficiency helps reduce heat and extend run time.
- Low ripple: Output ripple under 30mV supports sensitive electronics.
- Wide operating temperature: Functions from -40 to 85°C.
Specifications Explained
Input voltage (7-26V): This is the range of supply voltages the module can accept. It is compatible with 2S to 6S LiPo batteries (nominal 7.4V to 22.2V) and many other DC sources within that range. Always ensure your input stays within these limits.
Output voltage (5V): The module provides a regulated 5V output, which is a common voltage for RC receivers, servos, flight controllers, and USB-powered devices.
Output current (3A): The maximum current the module can supply is 3A. Continuous loads should stay at or below this rating, and adequate cooling may be needed for sustained high-current use.
Conversion efficiency (96% max): Efficiency indicates how much input power is converted to output power. Higher efficiency means less energy wasted as heat, which is important in compact builds.
Output ripple (<30mV): Ripple is the small AC fluctuation on the DC output. Lower ripple provides cleaner power for sensitive electronics.
Operating temperature (-40 to 85°C): The module is rated to work in extreme cold and heat, within this range.
Dimensions and weight: At 17.5 x 12 mm and 3 g, the module adds minimal bulk and weight to your project.
Compatibility and Requirements
This buck converter requires an input voltage between 7V and 26V DC. It outputs a fixed 5V at up to 3A. Ensure your power source and load are compatible with these ratings. The module is suitable for RC receivers, servos, flight controllers, and other 5V devices that draw no more than 3A combined. No additional components are required for basic operation, but proper wiring and connectors are necessary for installation.
Typical Uses
- Powering RC receivers and servos from a higher-voltage battery
- Providing a 5V rail for FPV transmitters and cameras
- Supplying flight controllers and accessories in drones
- DIY electronics projects needing a compact 5V regulator
- Battery chargers and home automation devices with compatible voltage requirements
What's in the Box
Package includes: 1 x Ultra-Small Size DC-DC 5V 3A BEC Power Supply Buck Step Down Module.
Quick specs
- Model No. / Name
- Buck Converter Module
- Input Voltage (V)
- 7 - 26V
- DC Output Voltage (V)
- 5
- Conversion efficiency
- 96% (Max)
- Operating Temperature (°C)
- -40 to 85
- Length (mm)
- 17.5



















