Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Renke, this water quality sensors is a good fit for makers, students and electronics hobbyists. Main specs: item type Sensor; model no. / name Formaldehyde Sensor; signal output 485. Check that your power source supplies 10 to 30 before connecting it.

Key Highlights

  • Item Type: Sensor
  • Model No. / Name: Formaldehyde Sensor
  • Signal Output: 485

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeSensor
Model No. / NameFormaldehyde Sensor
Voltage Rating10 to 30
Signal Output485
Power Consumption (W)0.12
Operating Temperature (°C)-20~50
Operating humidity15~90% RH without condensation
Working Pressure91~110Kpa
Shipping Weight0.4 kg
Shipping Dimensions20 × 20 × 5 cm

Overview

The Renke RS-CH2O-N01-2-5P-2 Formaldehyde Sensor 40°C~+80°C,≤±0.5ppm (Type RS485), made by Renke, is listed in our water quality sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Sensor
  • Model No. / Name: Formaldehyde Sensor
  • Voltage Rating: 10 to 30 (match this to your power supply; too high a voltage can damage the part)
  • Signal Output: 485
  • Power Consumption (W): 0.12
  • Operating Temperature (°C): -20~50
  • Operating humidity: 15~90% RH without condensation
  • Working Pressure: 91~110Kpa

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Note: Customize this product to meet your unique requirements—reach out to [email protected] for more information.  
For Customization:
    The formaldehyde transmitter designed by our company adopts electrochemical sensor with high measurement accuracy, fast response, long service life and long stability. The output resolution of the device can reach 0.01ppm, and it can be monitored online for 24 hours. Smart homes, air fresheners, air conditioners, etc. require long-term online monitoring of formaldehyde concentrations in industries or equipment. The device adopts wide voltage 10-30V DC power supply, 485 signal output, standard Modbus-RTU communication protocol, ModBus address can be set, baud rate can be changed, communication distance is up to 2000 meters. Note: The actual product may vary in slight variation with the image shown. Refer to the datasheet in the ATTACHMENTS section for more info. regd. the product.

Features:

  1. Range 0-5ppm, other ranges can also be customized.
  2. High measurement accuracy and repeatability up to ±2%.
  3. 485 communication interface standard ModBus-RTU communication protocol, address, baudrate can be set, the communication distance is up to 2000 meters.
  4. Optional high-quality OLED display, the value can be directly viewed on the spot, and the nightcan be clearly displayed.
  5. On-site power supply adopts 10~30V DC wide voltage power supply, which can adapt tovarious DC power supplies in the field.
  6. The product adopts wall-mounted waterproof case, which is easy to install and has highprotection level and can be applied to harsh environment.

Applications:

A temperature and humidity module can be added inside the shell to realize the joint detection of temperature, humidity, and formaldehyde.

Package Includes:

1 x Renke RS-CH2O-N01-2-5P-2 Formaldehyde Sensor 40°C~+80°C,≤±0.5ppm (Type RS485)

Quick specs

Item Type
Sensor
Model No. / Name
Formaldehyde Sensor
Voltage Rating
10 to 30
Signal Output
485
Power Consumption (W)
0.12
Operating Temperature (°C)
-20~50
See all specifications