Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

Non-contact radar level sensor with 76–81 GHz FMCW technology, ±1 mm accuracy and a 0.1–65 m range. IP67 housing and RS485 output make it suitable for tanks, rivers and reservoirs.

Key Highlights

  • 76–81 GHz FMCW radar for precise ±1 mm measurement
  • Wide 0.1 m to 65 m range covers shallow and deep vessels
  • Narrow 6° beam angle minimises false echoes
  • IP67 protection for outdoor and washdown environments
  • RS485 output with low 0.2 W power consumption
  • Operates from –40 to +80 °C in non-condensing humidity

Ideal For

  • Plant and process engineers specifying tank level instrumentation
  • Environmental monitoring teams tracking river and reservoir levels
  • System integrators building RS485-based telemetry systems
  • Water and wastewater treatment operators
  • Agricultural irrigation managers needing reliable level data

Buying Tip

Confirm that your controller or logger supports RS485 and can supply 10–30 V DC before ordering, and check that the 6° beam will clear tank walls at your mounting height.

Elecvora expert review

Our verdict

The Renke RS-RAD-N01-1-EX combines a very wide 65 m range with ±1 mm accuracy in a compact IP67 housing, making it a strong choice for industrial and environmental level monitoring where non-contact measurement is essential. Its RS485 interface and low power draw simplify integration into existing control and telemetry systems.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Excellent ±1 mm accuracy across the full 0.1–65 m range
  • Narrow 6° beam reduces false echoes in cluttered tanks
  • IP67 and –40 to +80 °C rating for harsh environments
  • Low 0.2 W power consumption suits remote installations
  • Standard RS485 output for easy PLC/RTU integration

Cons

  • Requires a separate RS485 master or controller to read data
  • No display or local configuration interface on the sensor
  • Power supply and communication wiring must be provided by the installer

Best for

Industrial tank farms, water authorities and environmental monitoring stations needing reliable non-contact level data over long ranges.

Not ideal for

Users who need a stand-alone level gauge with a built-in display or battery-powered operation.

Specifications

Item TypeRadar Level Sensor
Model No. / NameRS RAD N01 1 EX
Power Supply Voltage (V)DC 10–30 V
Signal OutputRS485
Measurement Range0.1 m ~ 65 m
Operating Temperature (°C)–40 to +80
Protection levelIP67
Accuracy±1 mm
Transmitting frequency76 GHz ~ 81 GHz
Beam Angle6°
Humidity Range0 ~ 95 %RH (non-condensing)
Length (mm)300
Weight (g)922
Diameter (mm)110
Shipping Weight1.416 kg
Shipping Dimensions42 × 17 × 15 cm

What's in the box

  • 1 x Renke RS-RAD-N01-1-EX Radar Level Sensor
  • 1 x Cable
  • 1 x Screw Set

Frequently Asked Questions

What power supply does the Renke RS-RAD-N01-1-EX require?
The sensor operates from a DC supply between 10 V and 30 V. It draws approximately 0.2 W, so a standard 12 V or 24 V industrial supply is suitable.
Can I connect this sensor directly to a computer?
The sensor uses RS485, which is not directly compatible with most computer ports. You will need an RS485-to-USB converter or an RS485 master device to read the data.
What is the minimum and maximum measuring distance?
The sensor measures from 0.1 m up to 65 m from the antenna face. Keep the mounting height so that the liquid surface stays within this range.
Is the sensor suitable for outdoor use?
Yes, the IP67-rated housing protects against dust and water ingress, and the operating temperature range of –40 to +80 °C supports outdoor installations. Ensure the cable gland is properly sealed.
What is included in the package?
The package contains one Renke RS-RAD-N01-1-EX radar level sensor, one cable and one screw set.
How should I clean the sensor?
Wipe the lens with a soft, damp cloth when necessary. Avoid abrasive cleaners or solvents that could scratch the lens or damage the housing.

Overview

The Renke RS-RAD-N01-1-EX is a non-contact radar level sensor designed for continuous measurement of liquids and solids in tanks, channels and open water. It uses 76–81 GHz FMCW millimeter-wave radar to calculate distance without touching the medium, so there are no moving parts to wear and no risk of contamination. The sensor delivers ±1 mm accuracy over a 0.1 m to 65 m range, making it versatile for both small process vessels and large reservoirs.

With a 6° beam angle, the radar concentrates its signal to reduce interference from tank walls, pipes and other obstructions. The IP67-rated housing withstands dust and water ingress, and the wide –40 to +80 °C operating range supports use in cold stores, outdoor installations and hot industrial environments.

Key Features

  • High-resolution FMCW radar: 76–81 GHz frequency band for stable, precise level readings.
  • Non-contact measurement: No wetted parts, ideal for corrosive or hygienic media.
  • RS485 interface: Simple integration with PLCs, RTUs and data loggers.
  • Low power draw: 0.2 W typical consumption supports remote or solar-powered sites.
  • Compact form factor: 110 mm diameter and 300 mm length for easy mounting.

Specifications Explained

Range 0.1–65 m: Covers everything from a small day tank to a deep reservoir, with a minimum dead zone of just 0.1 m.

Accuracy ±1 mm: Suitable for inventory monitoring, billing and process control where small level changes matter.

Beam angle 6°: A tight beam helps avoid false echoes in narrow tanks or installations near structural steel.

Power 10–30 V DC: Works with common 12 V and 24 V industrial supplies.

IP67 and –40 to +80 °C: Handles temporary immersion, dust and temperature extremes.

Compatibility and Requirements

The sensor requires a DC power supply between 10 V and 30 V and communicates over RS485. It is not a stand-alone display device; you will need a compatible RS485 master, controller or data logger to read measurements. Humidity must remain between 0 and 95 %RH, non-condensing.

Typical Uses

  • River, lake and reservoir level monitoring
  • Industrial tank and process level measurement
  • Sewage and wastewater treatment systems
  • Rainfall and flood monitoring stations
  • Chemical and petrochemical storage tanks
  • Agricultural irrigation and water management
  • Food and beverage processing tanks

What's in the Box

1 x Renke RS-RAD-N01-1-EX radar level sensor, 1 x cable, 1 x screw set.

Quick specs

Item Type
Radar Level Sensor
Model No. / Name
RS RAD N01 1 EX
Power Supply Voltage (V)
DC 10–30 V
Signal Output
RS485
Measurement Range
0.1 m ~ 65 m
Operating Temperature (°C)
–40 to +80
See all specifications