Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Renke RS-COD-N01-2-500-EX is a reagent-free COD sensor with RS485 output and a 0–500 mg/L range. Its dual-wavelength UV absorption and automatic cleaning deliver fast, low-maintenance water quality data.

Key Highlights

  • Reagent-free dual-wavelength UV absorption measurement
  • COD range 0–500 mg/L with 0.1 mg/L resolution
  • RS485 Modbus-RTU output for easy integration
  • IP68 waterproof rating for long-term outdoor use
  • Automatic cleaning and temperature compensation
  • Fast response time of ≤20 seconds

Ideal For

  • Wastewater treatment plant operators
  • Aquaculture farmers monitoring water quality
  • Environmental scientists and river monitors
  • Industrial effluent managers
  • IoT and smart water system integrators

Buying Tip

Confirm that your data logger or controller supports RS485 Modbus-RTU and can supply DC 12–30 V power before ordering.

Elecvora expert review

Our verdict

The Renke RS-COD-N01-2-500-EX offers a practical, reagent-free solution for continuous COD monitoring with fast response and robust IP68 construction. Its RS485 Modbus-RTU interface and automatic cleaning make it well-suited for integration into smart water systems.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Reagent-free operation reduces consumables and maintenance
  • Dual-wavelength UV absorption with turbidity compensation
  • IP68 waterproof and corrosion-resistant for harsh environments
  • Fast response time of ≤20 seconds
  • RS485 Modbus-RTU for easy integration

Cons

  • Requires external power supply and data logger
  • Limited to 0–40 °C operating temperature
  • No on-board display or local configuration interface

Best for

Continuous water quality monitoring in wastewater, aquaculture, and environmental applications

Not ideal for

Applications requiring portable, handheld measurement or extreme temperature conditions

Specifications

Item TypeCOD Sensor
Model No. / NameRS COD N01 2 500 EX
Power Supply Voltage (V)DC 12–30 V
Signal OutputRS485 (Modbus-RTU)
ResolutionCOD: 0.1 mg/L, Turbidity: 0.1 NTU
Response Time(s)≤20
MaterialCorrosion-resistant plastic & stainless steel
Max pressure<0.1 MPa
Measurement RangeCOD: 0–500 mg/L (equiv. KHP), Turbidity: 0–200 NTU
Operating Temperature (°C)0 to 40
Protection levelIP68
Flow Rate<3 m/s
Length (mm)230
Diameter (mm)50.49
Shipping Weight0.9 kg
Shipping Dimensions25 × 21 × 6 cm

What's in the box

  • 1 x Renke RS-COD-N01-2-500-EX COD Sensor (RS485, 0–500 mg/L)
  • 1 x Nylon Sleeve
  • 1 x Connecting Cable

Frequently Asked Questions

What is the measurement principle of this COD sensor?
The sensor uses dual-wavelength ultraviolet absorption to measure COD without chemical reagents, providing continuous and real-time data.
What communication protocol does the sensor use?
It uses RS485 with Modbus-RTU protocol, allowing integration with PLCs, data loggers, and IoT platforms.
What power supply is required?
The sensor operates on DC 12–30 V. A suitable power supply is not included and must be provided separately.
What is included in the package?
The package includes the COD sensor, a nylon sleeve, and a connecting cable.
How often does the sensor need cleaning?
The integrated automatic cleaning system helps prevent fouling, but periodic inspection and manual cleaning may still be needed depending on water conditions.
Can the sensor be submerged continuously?
Yes, with an IP68 rating, the sensor is designed for continuous submersion in water.

Overview

The Renke RS-COD-N01-2-500-EX is a high-precision COD sensor designed for continuous water quality monitoring without chemical reagents. Using dual-wavelength ultraviolet absorption technology, it measures chemical oxygen demand (COD) and turbidity simultaneously, delivering reliable data for smart water management systems. The sensor is built for long-term deployment, featuring an IP68 waterproof rating, corrosion-resistant plastic and stainless steel housing, and an integrated automatic cleaning system that reduces maintenance. With RS485 Modbus-RTU communication, it integrates seamlessly with PLCs, data loggers, and IoT platforms.

Key Features

  • Reagent-free measurement: Dual-wavelength UV absorption eliminates the need for chemical reagents, reducing operating costs and waste.
  • Wide COD range: Measures COD from 0 to 500 mg/L (equivalent KHP) with 0.1 mg/L resolution.
  • Turbidity compensation: Built-in correction ensures accurate COD readings even in turbid water.
  • Fast response: Responds in ≤20 seconds for real-time monitoring.
  • Automatic cleaning: Integrated cleaning system prevents fouling and maintains long-term stability.
  • Robust design: IP68 protection and corrosion-resistant materials withstand harsh environments.
  • Flexible power: Operates on DC 12–30 V for easy integration into various systems.

Specifications Explained

Measurement range: The 0–500 mg/L COD range covers typical municipal and industrial wastewater, while the 0–200 NTU turbidity range provides additional water clarity data. Resolution: 0.1 mg/L for COD and 0.1 NTU for turbidity allows detection of small changes. Response time: ≤20 seconds ensures timely data for process control. Operating temperature: 0 to 40 °C suits most indoor and outdoor water bodies. Pressure and flow: Maximum pressure <0.1 MPa and flow rate <3 m/s are suitable for submerged installation in open channels or tanks. Dimensions: 230 mm length and 50.49 mm diameter make it compact for various mounting options.

Compatibility and Requirements

The sensor communicates via RS485 using Modbus-RTU protocol, making it compatible with industrial controllers, data loggers, and IoT gateways that support this standard. It requires a DC 12–30 V power supply (not included). The package includes a connecting cable and nylon sleeve for installation. No additional reagents or consumables are needed for operation.

Typical Uses

  • Wastewater treatment plant monitoring
  • Aquaculture water quality management
  • Environmental and river monitoring
  • Industrial effluent testing
  • Smart water IoT systems
  • Laboratory and research water analysis

What's in the Box

  • 1 x Renke RS-COD-N01-2-500-EX COD Sensor (RS485, 0–500 mg/L)
  • 1 x Nylon Sleeve
  • 1 x Connecting Cable

Quick specs

Item Type
COD Sensor
Model No. / Name
RS COD N01 2 500 EX
Power Supply Voltage (V)
DC 12–30 V
Signal Output
RS485 (Modbus-RTU)
Resolution
COD: 0.1 mg/L, Turbidity: 0.1 NTU
Response Time(s)
≤20
See all specifications