
1 / 2 · Click to enlarge
At a glance
Made by Renke, this multi-parameter environmental sensors is a good fit for makers, students and electronics hobbyists. Main specs: item type Sensor; power consumption (w) Relay output: 1.2W, RS485 output: 0.4W; operating temperature (°c) -20~+60. Check that your power source supplies 10 to 30 before connecting it.
Key Highlights
- Item Type: Sensor
- Power Consumption (W): Relay output: 1.2W, RS485 output: 0.4W
- Operating Temperature (°C): -20~+60
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Sensor |
|---|---|
| Voltage Rating | 10 to 30 |
| Power Consumption (W) | Relay output: 1.2W, RS485 output: 0.4W |
| Operating Temperature (°C) | -20~+60 |
| Signal Output | Relay output: Normally open contact, RS485 output: Modbus-RTU protocol |
| Shipping Weight | 0.255 kg |
| Shipping Dimensions | 16 × 16 × 7 cm |
Overview
The Renke RS-SJ-N01-2 Industrial water leak sensor -20℃~+60℃, 0%RH~95%RH (non-condensing) (Type RS485), made by Renke, is listed in our multi-parameter environmental sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Sensor
- Voltage Rating: 10 to 30 (match this to your power supply; too high a voltage can damage the part)
- Power Consumption (W): Relay output: 1.2W, RS485 output: 0.4W
- Operating Temperature (°C): -20~+60
- Signal Output: Relay output: Normally open contact, RS485 output: Modbus-RTU protocol
- Shipping Weight: 0.255 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 16 × 16 × 7 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
For Customization:
This industrial water leak detector adopts unique AC detection technology, which effectively avoids the problem of water leakage sensitivity decreased due to oxidation of the immersed electrode for a long time. We offer 485 output and switch dry contact output. It can be connected to the on-site PLC, industrial control instrument, configuration screen, or configuration software. The maximum distance of the external leakage electrode can reach 30 meters, the external water leak rope of up to 30 meters. This is an industrial water immersion sensor.
Note: The actual product may vary slightly with the image shown. Refer to the datasheet in the ATTACHMENTS section for more info. regd. the product.
Features:
- Unique AC detection technology to prevent sensitivity loss
- Maintains electrode integrity, avoiding oxidation
- Supports 485 output and switch dry contact output
- Compatible with PLCs, industrial control instruments, and configuration screens/software
- Detects leaks up to 30 meters away, with optional 30-meter leak rope
- Affordable pricing and quick delivery
Application:
- Water leak detector wiring
- Relay interface wiring
- Use of leaking rope
Package Includes:
1 x Renke RS-SJ-N01-2 Industrial water leak sensor -20℃~+60℃, 0%RH~95%RH (non-condensing) (Type RS485)
2 x Screw
2 x Gripper
Quick specs
- Item Type
- Sensor
- Voltage Rating
- 10 to 30
- Power Consumption (W)
- Relay output: 1.2W, RS485 output: 0.4W
- Operating Temperature (°C)
- -20~+60
- Signal Output
- Relay output: Normally open contact, RS485 output: Modbus-RTU protocol
- Shipping Weight
- 0.255 kg



















