
1 / 4 · Click to enlarge
At a glance
Made by Renke, this water quality sensors is a good fit for makers, students and electronics hobbyists. Main specs: item type Sensor; signal output 485; humidity range 0~100%RH. Check that your power source supplies 10 to 30 before connecting it.
Key Highlights
- Item Type: Sensor
- Signal Output: 485
- Humidity Range: 0~100%RH
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Sensor |
|---|---|
| Voltage Rating | 10 to 30 |
| Signal Output | 485 |
| Humidity Range | 0~100%RH |
| Operating Temperature (°C) | -20~50 |
| Working Pressure | 90~110Kpa |
| Shipping Weight | 0.17 kg |
| Shipping Dimensions | 16 × 15 × 6 cm |
Overview
The Renke RS-NH3-N01-2-50P Ammonia Sensor -40℃~+80℃,0~50ppm(High precision) ≤± (Type RS485), made by Renke, is listed in our water quality sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Sensor
- Voltage Rating: 10 to 30 (match this to your power supply; too high a voltage can damage the part)
- Signal Output: 485
- Humidity Range: 0~100%RH (quoted range is usually line-of-sight; walls and interference shorten it)
- Operating Temperature (°C): -20~50
- Working Pressure: 90~110Kpa
- Shipping Weight: 0.17 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 16 × 15 × 6 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
For Customization:
Since the excretion of animals will produce a large amount of ammonia gas over time, it is
necessary to accurately detect the concentration of these gases at this time to avoid accidents
during manual operations. In pesticide manufacturing plants, chemical plants, fertilizer plants and
other occasions where ammonia is produced, real-time concentration detection or control of
ammonia is also required. The ammonia transmitter designed by our company adopts the imported first-line brand ammonia sensor. It has the characteristics of rapid response and strong anti-interference ability. After our unique compensation algorithm, multi-stage standard gas calibration, it also has a long life, Features of high precision, high repeatability and high stability. It is suitable for occasions requiring real-time monitoring and control of ammonia gas, such as agricultural greenhouses, breeding farms, pesticide manufacturers, and chemical plants. The equipment adopts wide-voltage 10-30V DC power supply, 485 signal output, standard Modbus-RTU communication protocol, ModBus address can be set, baud rate can be changed, and the communication distance is up to 2000 meters.
Note: The actual product may vary in slight variation with the image shown. Refer to datasheet in the ATTACHMENTS section for more info. regd. the product.
Features:
- Imported first-line brand electrochemical sensors are used, which are stable and durable.
- Multiple choices of measuring range, 0~50PPM, 0~100PPM, 0~500PPM.
- High measurement accuracy, up to ±2% FS, repeatability up to within 2%.
- 485 communication interface standard ModBus-RTU communication protocol, address and baudrate can be set, and the communication distance is up to 2000 meters.
- Optional high-quality OLED display, the value can be viewed directly on site, and can bedisplayed clearly at night.
- The on-site power supply adopts 10~30V DC wide-voltage power supply, which can adapt to avariety of on-site DC power supplies.
- The product adopts a wall-mounted waterproof shell, which is easy to install and has a highdegree of protection, which can be used in harsh on-site environments.
Applications:
- Real-time monitoring and control of ammonia gas
- Agricultural greenhouses
- Breeding farms
- Pesticide manufacturing plants
- Chemical plants
Package Includes:
1 x Renke RS-NH3-N01-2-50P Ammonia Sensor -40℃~+80℃,0~50ppm(High precision) ≤± (Type RS485)Quick specs
- Item Type
- Sensor
- Voltage Rating
- 10 to 30
- Signal Output
- 485
- Humidity Range
- 0~100%RH
- Operating Temperature (°C)
- -20~50
- Working Pressure
- 90~110Kpa



















