
1 / 2 · Click to enlarge
At a glance
Made by Renke, this water quality sensors is a good fit for makers, students and electronics hobbyists. Main specs: item type Sensor; power consumption (w) 0.6; signal output RS485/4~20mA/0~5V/0~10V. Check that your power source supplies 10 to 30 before connecting it.
Key Highlights
- Item Type: Sensor
- Power Consumption (W): 0.6
- Signal Output: RS485/4~20mA/0~5V/0~10V
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Sensor |
|---|---|
| Voltage Rating | 10 to 30 |
| Power Consumption (W) | 0.6 |
| Signal Output | RS485/4~20mA/0~5V/0~10V |
| Resolution | 0.01pH |
| Operating Temperature (°C) | 0~80 |
| Environmental Temperature (°C) | 0-60℃, relative humidity <85% |
| Shipping Weight | 0.59 kg |
| Shipping Dimensions | 25 × 21 × 9 cm |
Overview
The Renke RS-PH-N01-2-201T Industrial water PH sensor, 0℃ ~80℃; Resolution: 0.1℃,0~14.00pH; division value: 0.01, (Type RS485), made by Renke, is listed in our water quality sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Sensor
- Voltage Rating: 10 to 30 (match this to your power supply; too high a voltage can damage the part)
- Power Consumption (W): 0.6
- Signal Output: RS485/4~20mA/0~5V/0~10V
- Resolution: 0.01pH
- Operating Temperature (°C): 0~80
- Environmental Temperature (°C): 0-60℃, relative humidity <85%
- Shipping Weight: 0.59 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
For Customization:
RS-PH-*-2-* industrial pH sensor adopts conventional composite electrode, which is suitable for the measurement of conventional sewage, tap water, environmental sewage, domestic sewage and other solutions. The pH measure range is between 0~14pH, and the resolution is 0.01pH. The adaptation temperature of the electrode is 0-80℃. This water pH sensor consists of two parts: a data collector and an electrode probe. The ph electrode probe has four lengths of 5m, 10m, 15m, and 20m. The housing of the data collector is IP65 protection grade, which can be used in outdoor rain and snow environment.
When it detects that the PH concentration exceeds the preset alarm value, it can provide multiple alarm methods such as interface alarm, sound and light alarm, SMS alarm, telephone alarm, email alarm, etc., to remind managers to troubleshoot the cause of excessive PH value in time, and record the event for information Call and analyze.
Note: The actual product may vary in slightly variation with the image shown. Refer to the datasheet in the ATTACHMENTS section for more info. regd. the product.
Features:
- High performance: high accuracy, fast response, good repeatability
- Universal protocol: MODBUS RS-485 or 4~20mA current
- Wide-range power supply: 10V ~ 30VDC
- Robustness: suitable to be immersed in water for a long time
- Maintainance-Free: advanced junction design, no clogging
- Durable: anti-corrosion, automatic temperature compensation
- User-friendly: Easy to install and integrate
Applications:
- Industrial sewage
- Domestic sewage
- Agriculture
- Aquaculture
- Other scenarios in a non-corrosive weak acid and weak alkali environment
Package Includes:
1 x Renke RS-PH-N01-2-201T Industrial water PH sensor, 0℃ ~80℃; Resolution: 0.1℃,0~14.00pH; division value: 0.01, (Type RS485)Quick specs
- Item Type
- Sensor
- Voltage Rating
- 10 to 30
- Power Consumption (W)
- 0.6
- Signal Output
- RS485/4~20mA/0~5V/0~10V
- Resolution
- 0.01pH
- Operating Temperature (°C)
- 0~80



















