Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Renke, this air quality sensor is a good fit for makers, students and electronics hobbyists. Main specs: item type Sensor; operating temperature (°c) -20~+60; measurement range PM2.5: 0~1000ug/m3, PM10: 0~1000ug/m3. Check that your power source supplies 10 to 30 before connecting it.

Key Highlights

  • Item Type: Sensor
  • Operating Temperature (°C): -20~+60
  • Measurement Range: PM2.5: 0~1000ug/m3, PM10: 0~1000ug/m3

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeSensor
Voltage Rating10 to 30
Operating Temperature (°C)-20~+60
Measurement RangePM2.5: 0~1000ug/m3, PM10: 0~1000ug/m3
Resolution1ug/m3
Accuracy±3%FS(@100μg/m3,25℃,50%RH)
Signal OutputRS485/0-5v/0-10v/4-20ma
Shipping Weight0.22 kg
Shipping Dimensions15 × 15 × 6 cm

Overview

The Renke RS-PM-N01-2 Air Quality PM2.5 PM10 Sensor -20℃~+60℃,0%RH~95%RH Non dewing (Type RS485), made by Renke, is listed in our air quality sensor range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Sensor
  • Voltage Rating: 10 to 30 (match this to your power supply; too high a voltage can damage the part)
  • Operating Temperature (°C): -20~+60
  • Measurement Range: PM2.5: 0~1000ug/m3, PM10: 0~1000ug/m3 (quoted range is usually line-of-sight; walls and interference shorten it)
  • Resolution: 1ug/m3
  • Accuracy: ±3%FS(@100μg/m3,25℃,50%RH)
  • Signal Output: RS485/0-5v/0-10v/4-20ma
  • Shipping Weight: 0.22 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This pm sensor mainly adopts a wall-mounted installation method to detect the concentration of PM2.5 and PM10 in the room. The shell is made of high-strength waterproof material, which is not easily interfered with by water vapor and smoke in the air. This is an industrial cheap air quality sensor with high measurement accuracy and a wider range of use. Note: The actual product may vary in slight variation with the image shown. Refer to the datasheet in the ATTACHMENTS section for more info. regd. the product.

Features:

  1. Range: 0-1000ug/m3, resolution 1ug/m3.
  2. PM2.5 and PM10 are output at the same time.
  3. Unique dual-frequency data acquisition and automatic calibration technology, the consistency can reach ±10%.
  4. Long service life, the overall warranty is 2 years in a normal environment.

Package Includes:

1 x Renke RS-PM-N01-2 Air Quality PM2.5 PM10 Sensor -20℃~+60℃,0%RH~95%RH Non dewing (Type RS485)

Quick specs

Item Type
Sensor
Voltage Rating
10 to 30
Operating Temperature (°C)
-20~+60
Measurement Range
PM2.5: 0~1000ug/m3, PM10: 0~1000ug/m3
Resolution
1ug/m3
Accuracy
±3%FS(@100μg/m3,25℃,50%RH)
See all specifications