Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Renke, this multi-parameter environmental sensors is a good fit for makers, students and electronics hobbyists. Main specs: item type Sensor; model no. / name Pyranometer Sensor; resolution 1W/m². Check that your power source supplies 10 to 30 before connecting it.

Key Highlights

  • Item Type: Sensor
  • Model No. / Name: Pyranometer Sensor
  • Resolution: 1W/m²

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeSensor
Model No. / NamePyranometer Sensor
Voltage Rating10 to 30
Resolution1W/m²
Accuracy±3%
Environmental Temperature (°C)-40~60
Internal Resistance (Ohm)about 300Ω
Response Time(s)≤30
Shipping Weight1.011 kg
Shipping Dimensions24 × 23 × 13 cm

Overview

The Renke RS-TBQ-N01-AL Pyranometer Sensor -40℃~60℃,485 (standard Modbus-RTU protocol)(Type RS485), made by Renke, is listed in our multi-parameter environmental sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Sensor
  • Model No. / Name: Pyranometer Sensor
  • Voltage Rating: 10 to 30 (match this to your power supply; too high a voltage can damage the part)
  • Resolution: 1W/m²
  • Accuracy: ±3%
  • Environmental Temperature (°C): -40~60
  • Internal Resistance (Ohm): about 300Ω
  • Response Time(s): ≤30

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

It uses the thermoelectric principle and can measure solar radiation with a spectral range of 0.3~3μm. A desiccant-filled drying cartridge prevents dew from forming on the inner sides of the domes. A bubble level and adjusting leveling screws enable the sensor to be leveled without using a leveling base. High accuracy and can be sent for inspection. The solar pyranometer price is affordable. Note: The actual product may vary slightly variation with the image shown. Refer to the datasheet in the ATTACHMENTS section for more info. regd. the product.

Features:

  1. High accuracy with ±3% error
  2. Thermoelectric measurement principle
  3. Desiccant-filled drying cartridge to prevent dew formation
  4. Bubble level and adjustable leveling screws for precise setup
  5. Supports various output modes (RS485, 0-5V, 0-10V, 4-20ma)
  6. Wide application in meteorology, agriculture, and solar energy studies

Package Includes:

1 xRenke RS-TBQ-N01-AL Pyranometer Sensor -40℃~60℃,485 (standard Modbus-RTU protocol)(Type RS485)

Quick specs

Item Type
Sensor
Model No. / Name
Pyranometer Sensor
Voltage Rating
10 to 30
Resolution
1W/m²
Accuracy
±3%
Environmental Temperature (°C)
-40~60
See all specifications