
1 / 3 · Click to enlarge
AI Summary
The Renke SHT-70 is a 70 mm PE temperature probe using the SHT20 sensor with a calibrated I2C digital output. It delivers ±0.3°C typical accuracy across -40°C to +125°C while drawing very little current, making it easy to wire into low-power monitoring builds.
Key Highlights
- SHT20 sensing element with factory-calibrated digital output
- 70 mm probe length for flexible placement in enclosures
- I2C two-wire interface for direct microcontroller connection
- Temperature range of -40°C to +125°C with ±0.3°C typical accuracy
- Low current draw: 200–330 µA measuring, 0.15–0.4 µA sleep
- 2.1V to 3.6V DC operating voltage for low-power systems
Ideal For
- IoT developers building low-power environmental sensor nodes
- Makers and hobbyists adding calibrated temperature sensing to microcontroller projects
- Engineers specifying probes for industrial monitoring panels
- Technicians logging temperature in cabinets and enclosures
- Students learning I2C digital sensor integration
Buying Tip
Check that your controller runs at 3.3V logic and has a free I2C bus before ordering, since the probe needs a 2.1V to 3.6V supply and a two-wire digital interface.
Elecvora expert review
Our verdict
The Renke SHT-70 is a tidy, low-power digital temperature probe that removes the calibration work from a monitoring build. Its I2C output and wide temperature range make it easy to justify for loggers and IoT nodes, provided your system runs at 3.3V logic.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Factory-calibrated digital output needs no analogue conditioning
- Very low sleep current suits battery-powered installations
- Wide -40°C to +125°C range with ±0.3°C typical accuracy
- 70 mm probe length offers useful placement flexibility
Cons
- Supply is limited to 2.1V to 3.6V, so 5V-only systems need level shifting
- Connector and cable termination details are not specified in the listing
- Humidity is a secondary capability of the SHT20 element, not the headline function
Best for
Low-power IoT and industrial temperature monitoring builds with 3.3V I2C hosts
Not ideal for
5V-only systems without level shifting or users needing a plug-and-play USB sensor
Specifications
| Shipping Weight | 0.078 kg |
|---|---|
| Shipping Dimensions | 15 × 14 × 4 cm |
What's in the box
- 1 x Renke SHT-70, PE Temperature Sensor Probe For (SHT20), 70mm Length
Frequently Asked Questions
What sensor does this probe use?
What voltage does the probe need?
How accurate is the temperature reading?
How much current does it draw?
What is included with the probe?
How should I care for the probe?
Overview
The Renke SHT-70 is a PE temperature sensor probe that measures 70 mm in length and uses the Sensirion SHT20 sensing element. Rather than outputting an analogue voltage that needs amplification and calibration, it delivers a fully calibrated, linearised digital signal over an I2C two-wire bus. That makes it straightforward to connect to common microcontrollers and data loggers without designing a signal-conditioning stage.
Because the probe is factory tested and calibrated, each unit is intended to give consistent readings without user trimming. Its low operating current and very low sleep current also make it a sensible candidate for battery-powered or remote monitoring installations.
Key Features
- SHT20 sensor element: a well-known digital temperature sensing component with factory calibration.
- 70 mm probe length: gives some physical separation between the sensing point and the board or enclosure.
- I2C digital output: a two-wire interface that carries a calibrated digital value.
- Wide temperature range: measures from -40°C to +125°C.
- Low power: 200–330 µA while measuring and 0.15–0.4 µA in sleep mode.
- Flexible supply: operates from 2.1V to 3.6V DC.
Specifications Explained
Accuracy and resolution: the ±0.3°C figure is a typical accuracy value, and temperature resolution can reach up to 14-bit. Repeatability is stated at ±0.1°C, with long-term drift below ±0.04°C per year, which matters when a probe stays installed for months or years.
Humidity figures: the SHT20 element also reports humidity, with a 0 to 100 %RH operating range, ±3.0 %RH typical accuracy and up to 12-bit resolution. Note that the product is listed as a temperature sensor probe, so treat humidity data as a secondary capability of the sensing element.
Power behaviour: the measuring current of 200–330 µA and sleep current of 0.15–0.4 µA are the numbers to check when estimating battery runtime. The 2.1V to 3.6V supply range covers typical 3.3V logic systems.
Compatibility and Requirements
The probe communicates over I2C, so the host device must provide an I2C bus and a supply within 2.1V to 3.6V DC. Wiring and connector details are not specified in the product data, so confirm the physical termination before ordering. No driver library, cable length or enclosure rating is stated.
Typical Uses
- Environmental monitoring nodes and IoT sensor builds
- Battery-powered temperature logging
- Industrial monitoring panels and control cabinets
- DIY electronics projects needing a calibrated digital temperature reading
What's in the Box
1 x Renke SHT-70, PE Temperature Sensor Probe For (SHT20), 70mm Length.



















