
1 / 3 · Click to enlarge
AI Summary
A 71 mm probe using the Sensirion SHT20 element to deliver factory-calibrated temperature and humidity readings over I2C. It gives stable digital output from 2.1 to 3.6 V, making environmental logging simple.
Key Highlights
- Sensirion SHT20 CMOSens sensing element, factory calibrated
- Digital I2C output for temperature and relative humidity
- Temperature range -40 °C to +125 °C, typical accuracy ±0.3 °C
- Humidity range 0 to 100 %RH, typical accuracy ±3.0 %RH
- Low power: 200–330 µA measuring, 0.15–0.4 µA sleep
- 71 mm probe length for flexible installation
Ideal For
- IoT developers building low-power environmental nodes
- HVAC and building monitoring technicians
- Makers logging temperature and humidity over I2C
- Industrial teams monitoring enclosures and cabinets
- Students and educators working with digital sensors
Buying Tip
Confirm your host board runs at 3.3 V logic and has a free I2C bus before ordering, since the probe's 2.1–3.6 V supply range leaves no headroom for 5 V-only systems.
Elecvora expert review
Our verdict
A tidy, well-behaved digital probe for anyone who wants calibrated temperature and humidity over I2C without extra circuitry. Its low sleep current and wide range suit long-running monitoring, though the fixed SHT20 platform limits it to buyers who already plan around that part.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Factory-calibrated digital output saves setup time
- Very low sleep current suits battery-powered nodes
- Wide -40 °C to +125 °C and 0–100 %RH coverage
- Improved stability in high-humidity conditions
Cons
- Requires a host with an I2C bus
- Supply must stay within 2.1–3.6 V DC
- No mounting hardware or cable details are specified
Best for
Low-power IoT and environmental monitoring builds using I2C
Not ideal for
Plug-and-play users wanting a USB or display-ready thermometer
Specifications
| Shipping Weight | 0.078 kg |
|---|---|
| Shipping Dimensions | 15 × 14 × 4 cm |
What's in the box
- 1 x Renke SHT-71 High Sensitivity Temperature Sensor Probe For (SHT20), 71mm Length
Frequently Asked Questions
What does this probe measure?
What voltage does it need?
How accurate are the readings?
What interface does it use?
What is included in the package?
How should I care for the probe?
Overview
The Renke SHT-71 is a slim environmental probe that measures temperature and relative humidity using the Sensirion SHT20 CMOSens sensing element. Rather than outputting an analogue voltage that needs conditioning, it delivers a calibrated digital result over a two-wire I2C bus, which keeps wiring simple and removes the need for user calibration in most builds.
With a 71 mm probe length, it can be positioned into ducts, enclosures or open air while the connection end stays accessible. Typical accuracy of ±0.3 °C and ±3.0 %RH, together with low current draw, makes it a practical part for continuous monitoring rather than one-off spot checks.
Key Features
- Factory-calibrated temperature and humidity measurement
- I2C digital interface with linearised output
- Wide temperature span from -40 °C to +125 °C
- Full 0 to 100 %RH humidity range
- Improved stability in high-humidity conditions
- Very low sleep current for battery-operated designs
Specifications Explained
Resolution and repeatability: temperature resolves to up to 14-bit and humidity to up to 12-bit, with repeatability of ±0.1 °C and ±0.1 %RH respectively. In practice this means small changes are visible in your data rather than being lost to rounding.
Long-term drift: temperature drift is quoted at less than ±0.04 °C per year, and humidity hysteresis is ±1 %RH, so readings stay consistent between cycles.
Power: the probe runs from 2.1 V to 3.6 V DC, drawing 200–330 µA while measuring and only 0.15–0.4 µA in sleep. That makes it friendly to small batteries and low-power microcontrollers.
Compatibility and Requirements
The probe is designed for the SHT20 sensor platform and communicates over a standard two-wire I2C interface, so it needs a host microcontroller or logger with an I2C bus and a supply within 2.1–3.6 V DC. Because the output is already calibrated and digital, no external ADC or calibration step is required.
Typical Uses
- IoT environmental nodes and data loggers
- HVAC and building condition monitoring
- Industrial sensing cabinets and enclosures
- Greenhouse, storage and workshop climate checks
What's in the Box
1 x Renke SHT-71 High Sensitivity Temperature Sensor Probe for SHT20, 71 mm length.



















