
1 / 3 · Click to enlarge
AI Summary
A compact 71 mm digital probe using the SHT35 sensing element to deliver calibrated temperature and humidity readings over I2C. It runs from 2.4V to 5.5V and covers -40°C to +125°C, making integration into monitoring systems straightforward.
Key Highlights
- SHT35 digital sensing element with factory-calibrated output
- Measures both temperature and humidity in one probe
- Typical accuracy of ±0.1°C and ±1.5% RH
- I2C interface supporting communication speeds up to 1 MHz
- Wide 2.4V to 5.5V DC operating voltage
- 71 mm probe length for flexible installation
Ideal For
- HVAC and building automation integrators
- Industrial control panel and equipment designers
- Agricultural and greenhouse monitoring installers
- IoT developers building environmental sensor nodes
- Research teams logging temperature and humidity
Buying Tip
Confirm that your controller has a free I2C bus and can supply between 2.4V and 5.5V before ordering, since the probe needs no other interface hardware.
Elecvora expert review
Our verdict
The SHT-71 is a sensible building block for anyone who needs calibrated temperature and humidity data over a simple digital bus. Its wide voltage window and broad temperature range make it easy to fit into existing designs without extra hardware.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Calibrated digital output removes the need for signal conditioning
- Dual temperature and humidity measurement in one probe
- Wide 2.4V to 5.5V supply suits both 3.3V and 5V systems
- Broad -40°C to +125°C operating range
- Compact 71 mm body for tight enclosures
Cons
- Requires an I2C host and wiring work; not a standalone display unit
- No cable or connector details are specified, so plan your own harness
- Accuracy figures are typical values, not guaranteed maxima
Best for
Engineers and integrators adding reliable environmental sensing to control or monitoring systems
Not ideal for
Buyers wanting a plug-and-play room thermometer with a screen
Specifications
| Shipping Weight | 0.077 kg |
|---|---|
| Shipping Dimensions | 15 × 14 × 4 cm |
What's in the box
- 1 x Renke SHT-71 High Sensitivity Temperature Sensor Probe (SHT35), 71 mm length
Frequently Asked Questions
What does this probe actually measure?
What voltage does it need?
How do I connect it to a microcontroller?
How accurate are the readings?
What is included with the probe?
How should I care for the sensor?
Overview
The Renke SHT-71 is a digital environmental sensor probe built around the SHT35 sensing element. It measures temperature and humidity together and delivers the results over an I2C bus, so the readings arrive already calibrated and ready for a host controller to use. The probe body is 71 mm long, which gives enough length to position the sensing element where the air actually is while keeping the electronics compact.
This is a component for people who build or specify monitoring systems rather than a plug-and-play consumer gadget. It suits control panels, data loggers, HVAC equipment and connected devices that need dependable environmental data at low power.
Key Features
- SHT35 sensing element: a digital sensor that outputs calibrated temperature and humidity values.
- Dual measurement: one probe covers both parameters, reducing wiring and installation work.
- Fast response: designed for real-time environmental monitoring rather than slow spot checks.
- Long-term stability: built for continuous operation in fixed installations.
- Low power consumption: suited to battery-backed or energy-conscious designs.
- Compact 71 mm probe: fits into tight enclosures and equipment housings.
Specifications Explained
Accuracy
Typical accuracy is ±0.1°C for temperature and ±1.5% RH for humidity. In practice this means readings are close enough for climate control, storage monitoring and general environmental logging, where small drifts would otherwise go unnoticed.
Measurement range
The probe operates from -40°C to +125°C and can be stored between -40°C and +150°C. That span covers freezers, outdoor cabinets in cold climates, and warm equipment spaces without needing a different sensor for each case.
Interface and voltage
Communication is digital over I2C at speeds up to 1 MHz, and the supply can be anything from 2.4V to 5.5V DC. The wide voltage window means the probe can share a rail with common 3.3V and 5V logic without an extra regulator.
Compatibility and Requirements
The probe requires a host device with an I2C bus and a DC supply within 2.4V to 5.5V. Wiring, pull-up resistors and bus addressing are determined by the host system, so check your controller's I2C configuration before connecting. No separate transmitter or signal converter is needed because the output is already digital.
Typical Uses
- HVAC monitoring and building climate control
- Industrial automation and equipment cabinets
- Agricultural and greenhouse environment tracking
- Research and laboratory measurement setups
- IoT devices and connected monitoring nodes
What's in the Box
1 x Renke SHT-71 High Sensitivity Temperature Sensor Probe (SHT35), 71 mm length.



















