Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Seeed Studio, this bluetooth, wifi and trans-receiver ics is a good fit for people who spend time outdoors. Main specs: manufacturer Seeed studio; model no. / name Seeedstudio Wio Tracker 1110 Dev Board- the Tracker Prototype for Indoor and Outdoor Positioning; sensitivity (dbm) -141 to -125.

Key Highlights

  • Manufacturer: Seeed studio
  • Model No. / Name: Seeedstudio Wio Tracker 1110 Dev Board- the Tracker Prototype for Indoor and Outdoor Positioning
  • Sensitivity (dBm): -141 to -125

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerSeeed studio
Model No. / NameSeeedstudio Wio Tracker 1110 Dev Board- the Tracker Prototype for Indoor and Outdoor Positioning
Operating Frequency (MHz)863 to 928
Sensitivity (dBm)-141 to -125
Range2km to 10km
Operating Temperature (°C)-40 to +125
Typical accuracy (°C)0.2
Opt. Relative Humidity(RH)0 to 100
Flash Memory1MB
RAM256KB
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The Seeedstudio Wio Tracker 1110 Dev Board- the Tracker Prototype for Indoor and Outdoor Positioning, made by Seeed Studio, is listed in our bluetooth, wifi and trans-receiver ics range and suits people who spend time outdoors. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: Seeed studio
  • Model No. / Name: Seeedstudio Wio Tracker 1110 Dev Board- the Tracker Prototype for Indoor and Outdoor Positioning
  • Operating Frequency (MHz): 863 to 928 (make sure the rest of your system works at this frequency)
  • Sensitivity (dBm): -141 to -125
  • Range: 2km to 10km (quoted range is usually line-of-sight; walls and interference shorten it)
  • Operating Temperature (°C): -40 to +125
  • Typical accuracy (°C): 0.2
  • Opt. Relative Humidity(RH): 0 to 100

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Seeed Studio Wio Tracker 1110 Development Board is based on the Wio-WM1110 Wireless Module and integrates a Semtech LR1110 LoRa® transceiver and a multi-purpose radio front-end for geolocation. The user-friendly, LoRa-based tracking development platform enhances tracking and environmental monitoring applications. With a compact size and rich Grove interfaces, the Wio Tracker 1110 board is conveniently equipped with onboard antennas for easy deployment. The device supports the Arduino development environment and LoRaWAN® protocol stack, making it ideal for tracking-related IoT projects.

Features:

  1. Powered by the Nordic nRF52840 and Semtech LR1110
  2. Multi-protocols, including LoRa®, GNSS(GPS/BeiDou), BLUETOOTH, and Wi-Fi Sniffer
  3. Onboard temperature sensor, humidity sensor, and 3-axis accelerometer for capturing a wide range of environmental and motion data
  4. Supports over 300+ Grove sensors making it highly adaptable for different tracking and sensing requirements
  5. Fully open source platform - leverage the extensive LR1110 and nRF52840 open-source ecosystem for infinite application possibilities
  6. Arduino IDE compatibility allows easy programming and a familiar environment for developers.
  7. 6dBm maximum output power
  8. Voltage supplies 3.3V for USB 2.0 Type-C 4.5V battery connector

Package Includes:

1 x Seeedstudio Wio Tracker 1110 Dev Board- the Tracker Prototype for Indoor and Outdoor Positioning

Quick specs

Manufacturer
Seeed studio
Model No. / Name
Seeedstudio Wio Tracker 1110 Dev Board- the Tracker Prototype for Indoor and Outdoor Positioning
Operating Frequency (MHz)
863 to 928
Sensitivity (dBm)
-141 to -125
Range
2km to 10km
Operating Temperature (°C)
-40 to +125
See all specifications