
1 / 4 · Click to enlarge
At a glance
Made by SmartElex, this smartelex oled display modules is a good fit for makers, students and electronics hobbyists. Main specs: display mode Passive Matrix; display color Monochrome (White); driver ic SSD1309. Check that your power source supplies logic : 1.65-3.3V, display : 12-13V(VCC) before connecting it.
Key Highlights
- Display Mode: Passive Matrix
- Display Color: Monochrome (White)
- Driver IC: SSD1309
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Display Mode | Passive Matrix |
|---|---|
| Display Color | Monochrome (White) |
| Driver IC | SSD1309 |
| Interface | 4-wire SPI, and I2C selectable via BS1/BS2 |
| Supply Voltage | logic : 1.65-3.3V, display : 12-13V(VCC) |
| Operating Current | 180-300uA(logic),34.8-46mA(display) |
| Pixels | Number of Pixels: 128 × 64 |
| Panel Size | 42.04 × 27.22 × 1.45 (mm) |
| Active Area (mm) | 35.05 × 17.516 (mm) |
| Pixel Pitch | 0.274 × 0.274 (mm) |
| Pixel Size (um) | 0.254 × 0.254 (mm) |
| Length (mm) | 43 |
| Width (mm) | 38 |
| Weight (g) | 09 |
| Sensor Type | Strain Gauge Based Load Cell |
| Operating Voltage (V) | 2.7~5.5 |
| Dimensions (L x W x H) mm | 170 x 130 x 130 |
| Installation | Tool-Free, Easy Replacement |
| Brightness (cd/m²) | Typical 120 |
| Shipping Weight | 0.039 kg |
| Shipping Dimensions | 10 × 7 × 4 cm |
Overview
The SmartElex 1.54 inch Monochrome OLED Display Module, made by SmartElex, is listed in our smartelex oled display modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Display Mode: Passive Matrix (measured diagonally; compare with the space you have before ordering)
- Display Color: Monochrome (White) (measured diagonally; compare with the space you have before ordering)
- Driver IC: SSD1309
- Interface: 4-wire SPI, and I2C selectable via BS1/BS2 (confirm your cable or board uses the same connector)
- Supply Voltage: logic : 1.65-3.3V, display : 12-13V(VCC) (measured diagonally; compare with the space you have before ordering)
- Operating Current: 180-300uA(logic),34.8-46mA(display) (measured diagonally; compare with the space you have before ordering)
- Pixels: Number of Pixels: 128 × 64
- Panel Size: 42.04 × 27.22 × 1.45 (mm) (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Display Mode: Passive Matrix
- Display Color: Monochrome (White)
- Drive Duty: 1/64 Duty
- Driver IC: SSD1309
- Interface Options: 4-wire SPI, and I2C selectable via BS1/BS2
- Supply Voltage for logic: 1.65-3.3V
- Supply Voltage for display: 12-13V(VCC)
- Max Brightness : Typical 120 cd/m²
- Operating Current: 180-300uA(logic),34.8-46mA(display)
Package Includes:
1 x SmartElex 1.54 inch Monochrome OLED Display Module
1 x 7 pin cable interface
1 x Screw Set
Quick specs
- Display Mode
- Passive Matrix
- Display Color
- Monochrome (White)
- Driver IC
- SSD1309
- Interface
- 4-wire SPI, and I2C selectable via BS1/BS2
- Supply Voltage
- logic : 1.65-3.3V, display : 12-13V(VCC)
- Operating Current
- 180-300uA(logic),34.8-46mA(display)



















