Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 1.69 inch TFT LCD module with a 240 x 280 pixel panel, ST7789V3 driver and 4-wire SPI control. It delivers 262K colours at 500 cd/m² and runs from 3.3 V or 5 V supplies.

Key Highlights

  • 1.69 inch TFT LCD panel with 240 x RGB x 280 pixel resolution
  • ST7789V3 driver IC with a simple 4-wire SPI interface
  • 262K colour depth in normally black display mode
  • 500 cd/m² typical luminance from three parallel white LEDs
  • Dual 3.3 V or 5 V operating voltage for flexible integration
  • Compact 38 x 32 mm module weighing approximately 7 g

Ideal For

  • Embedded developers building compact instrument displays
  • Makers and hobbyists adding a colour UI to microcontroller projects
  • Product designers prototyping handheld device interfaces
  • Electronics technicians creating custom control panels
  • Students learning SPI display integration

Buying Tip

Confirm that your microcontroller library supports the ST7789V3 driver over 4-wire SPI before ordering, since the module depends on that controller for correct initialisation.

Elecvora expert review

Our verdict

A tidy little SPI display that balances resolution, brightness and ease of wiring for compact embedded projects. The ST7789V3 driver and dual voltage support make it approachable for both hobbyists and product developers.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Clear 240 x 280 resolution in a small footprint
  • Simple 4-wire SPI connection
  • Bright 500 cd/m² backlight
  • Works with 3.3 V or 5 V supplies
  • Wide -20 to +70 degrees Celsius operating range

Cons

  • Requires host firmware that supports the ST7789V3 driver
  • Only the module and 8-pin cable are included, so mounting hardware must be sourced separately

Best for

Compact embedded displays and handheld device interfaces

Not ideal for

Large-format or high-resolution display applications

Specifications

Display TypeTFT LCD, dot-matrix format
Display Size (Inch)1.69 inch diagonal
Resolution240 x RGB x 280 pixels
Interface4-wire SPI
Display ModeNormally black
Color Depth262K colors
Driver ICST7789V3
Luminance500 cd/m² typical
Display Backlight3 White LEDs (parallel circuit)
Operating Temperature (°C)-20 to +70
Storage Temperature (°C)-30 to +80
Operating Voltage (V)3.3 / 5
Display Color262K
Length (mm)38
Width (mm)32
Weight (g)07
Sensor TypeStrain Gauge Based Load Cell
Dimensions (L x W x H) mm170 x 130 x 130
InstallationTool-Free, Easy Replacement
Shipping Weight0.034 kg
Shipping Dimensions10 × 7 × 4 cm

What's in the box

  • 1 x SmartElex 1.69 inch TFT LCD module
  • 1 x 8-pin cable interface

Frequently Asked Questions

What driver IC does this display use?
The module uses the ST7789V3 driver IC, so your display library or firmware must support that controller.
What interface does the module require?
It communicates over a 4-wire SPI interface, so your microcontroller needs an SPI peripheral and enough free pins for chip-select and data/command control.
What voltage can I power it from?
The module supports an operating voltage of 3.3 V or 5 V, letting it work with common logic systems.
What is included in the package?
You receive one SmartElex 1.69 inch TFT LCD module and one 8-pin cable interface.
What is the operating temperature range?
The display is rated for -20 to +70 degrees Celsius during operation and can be stored between -30 and +80 degrees Celsius.
How bright is the display?
The three-LED white backlight provides a typical luminance of 500 cd/m², which is readable in normal indoor lighting.

Overview

The SmartElex 1.69 inch TFT LCD module is a compact colour display designed for embedded systems and small electronic devices. It pairs a 240 x RGB x 280 dot-matrix panel with the ST7789V3 driver IC, so the display can be controlled over a 4-wire SPI bus rather than a wide parallel interface. That keeps wiring simple and leaves more pins free on the host microcontroller.

The module measures about 38 mm by 32 mm and weighs roughly 7 g, making it suitable for handheld enclosures and space-constrained builds. It is rated for operation from -20 to +70 degrees Celsius and can be stored between -30 and +80 degrees Celsius.

Key Features

  • Sharp small-format panel: 1.69 inch diagonal with 240 x RGB x 280 pixels for crisp text and graphics.
  • Integrated driver: the ST7789V3 handles display memory and refresh, reducing the load on the host controller.
  • 4-wire SPI interface: a straightforward serial connection for microcontrollers and development boards.
  • 262K colours: normally black display mode with rich colour reproduction for UI elements and images.
  • Bright backlight: three white LEDs in a parallel circuit produce a typical luminance of 500 cd/m².
  • Flexible supply: operates from either 3.3 V or 5 V, suiting a range of logic systems.

Specifications Explained

The 240 x RGB x 280 resolution means each row contains 240 pixels made of red, green and blue sub-pixels across 280 rows. This density is well suited to menus, sensor readouts, icons and short text blocks on a small screen.

Colour depth of 262K colours gives smooth gradients and clear graphics without the memory overhead of a full 16-million-colour panel. The normally black mode means inactive pixels appear dark, which improves perceived contrast in dim environments.

The 500 cd/m² typical luminance indicates a display that remains readable in ordinary indoor lighting. Because the backlight uses three white LEDs wired in parallel, the lighting circuit is simple and consistent.

Operating voltage of 3.3 V or 5 V allows the module to work with both common logic levels, while the wide temperature range supports use in workshops, outdoor enclosures and portable instruments.

Compatibility and Requirements

The module communicates over 4-wire SPI and requires a host microcontroller or development board with an SPI peripheral. Power must be supplied at 3.3 V or 5 V as specified. The ST7789V3 driver means the host firmware must support that controller. No other accessories or headers are confirmed in the product data, so plan your wiring and mounting accordingly.

Typical Uses

  • Status and sensor readouts in embedded instruments
  • User interfaces for portable and handheld devices
  • Custom electronics and maker projects
  • Compact control panels for tools and equipment
  • Prototyping display interfaces before production

What's in the Box

The package includes one SmartElex 1.69 inch TFT LCD module and one 8-pin cable interface for connecting the display to your host board.

Quick specs

Display Type
TFT LCD, dot-matrix format
Display Size (Inch)
1.69 inch diagonal
Resolution
240 x RGB x 280 pixels
Interface
4-wire SPI
Display Mode
Normally black
Color Depth
262K colors
See all specifications