Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A dual brushed DC motor driver rated for 7–22V and 10A continuous, with an onboard 5V 3A buck converter. It combines PWM, RC control and built-in current and thermal protection in one plug-and-play board.

Key Highlights

  • Dual brushed DC motor driver with bidirectional control
  • 7V to 22V motor supply range for flexible builds
  • 10A continuous, 20A peak for 10 seconds
  • Onboard 5V 3A buck converter powers logic
  • Accepts PWM, locked-antiphase, sign-magnitude and RC signals
  • Current limiting, temperature sensor and thermal shutdown

Ideal For

  • Robot builders making differential-drive mobile robots
  • Combat and racing robot teams needing high burst current
  • Makers pairing a Raspberry Pi with brushed DC motors
  • RC hobbyists converting vehicles to electronic speed control
  • Students and educators building mechatronics projects

Buying Tip

Check that your motor supply stays within 7V to 22V and that your motors' continuous draw fits the 10A rating, since the board has no heatsink for sustained higher loads.

Elecvora expert review

Our verdict

The SmartElex 10D packs a genuinely useful current rating, an onboard buck converter and multiple control schemes into one compact driver board. It suits robot builders who want flexibility without designing a driver from scratch, though sustained high loads will need care because there is no heatsink.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 10A continuous and 20A peak for 10 seconds
  • Onboard 5V 3A buck converter simplifies wiring
  • Supports PWM, locked-antiphase, sign-magnitude and RC control
  • Built-in current limiting, temperature sensing and thermal shutdown

Cons

  • No heatsink, so sustained near-maximum current needs attention
  • Brushed DC motors only
  • Motor battery and control signals are not included

Best for

Differential-drive robots and RC builds using two brushed DC motors

Not ideal for

Brushless motor projects or setups needing continuous current well above 10A

Specifications

Continuous Discharge Current (A)10
Voltage Rating (V)7 to 22
Shipping Weight0.12 kg
Shipping Dimensions12 × 10 × 5 cm

What's in the box

  • 1 x SmartElex 10D Smart Motor Driver (Dual Motor, PWM & RC) (Powered by Raspberry Pi)
  • 1 x Interfacing cable

Frequently Asked Questions

What motors can the SmartElex 10D drive?
It drives two brushed DC motors in both directions. It is not intended for brushless motors.
What supply voltage does it need?
The motor operating voltage range is 7V to 22V. Stay within that range to avoid damaging the board.
How much current can it handle?
It is rated for 10A continuous without a heatsink and 20A peak for up to 10 seconds, with current limiting at 35A.
Can I power my Raspberry Pi from the board?
The onboard 5V 3A buck converter can supply logic power from your motor battery. Confirm your controller's power requirements before relying on it.
What control signals does it accept?
It accepts PWM and direction signals, locked-antiphase and sign-magnitude PWM, and RC-style control, with 3V and 5V logic level inputs.
What is included with the driver?
You receive one SmartElex 10D Smart Motor Driver and one interfacing cable. Motors, battery and controller are not included.

Overview

The SmartElex 10D is a dual-channel high-current motor driver designed for mobile robots and mechatronics builds that need more current than a standard driver can supply. It controls two brushed DC motors in both directions and sits between your motor battery and your controller, handling the heavy switching while your Raspberry Pi or RC receiver sends the commands.

The board is intended to be quick to deploy: add power, write simple control code, and it is ready to drive a brushed motor. Solid-state switching replaces mechanical relays, so response is fast and there are no relay contacts to wear out.

Key Features

  • Wide 7V to 22V motor operating voltage
  • 10A continuous current without a heatsink
  • 20A peak motor current for 10 seconds
  • Onboard 5V 3A buck converter
  • Bidirectional control of two brushed DC motors
  • PWM frequency up to 490 Hz
  • Supports locked-antiphase and sign-magnitude PWM
  • 3V and 5V logic level inputs
  • Onboard temperature sensor and internal thermal shutdown
  • Current limiting and under-voltage lockout

Specifications Explained

Voltage and current

The 7V to 22V input range covers a broad spread of brushed motor setups, from small low-power motors to higher-current units. Continuous current is rated at 10A without a heatsink, and the board can handle a 20A peak for up to 10 seconds, which helps with short bursts such as a sudden start or a stall recovery. Current limiting engages at 35A to protect the output stage.

Power for your logic

The integrated 5V 3A buck converter lets you run your control electronics from the same motor battery, reducing the number of separate supplies in your build.

Control options

You can drive the board with PWM and direction signals, or use locked-antiphase and sign-magnitude PWM schemes. PWM frequency runs up to 490 Hz. Inputs accept both 3V and 5V logic, so the board suits 3.3V controllers as well as 5V receivers.

Protection

An onboard temperature sensor, internal thermal shutdown, current limiting and under-voltage lockout work together to keep the driver and your system safe under demanding conditions.

Compatibility and Requirements

The board is powered by a Raspberry Pi in the intended setup and accepts 3V and 5V logic-level inputs, so it can also be driven by controllers and RC receivers that output those levels. It drives brushed DC motors only. You will need a motor supply within the 7V to 22V range and a way to send PWM and direction (or RC) signals. The package includes an interfacing cable.

Typical Uses

  • Differential-drive mobile robots and rovers
  • Racing robots and combat robot drive systems
  • Robot rumble and other high-current drive builds
  • Mechatronics projects needing two bidirectional motors
  • RC-controlled vehicles with brushed motors

What's in the Box

  • 1 x SmartElex 10D Smart Motor Driver (Dual Motor, PWM & RC) (Powered by Raspberry Pi)
  • 1 x Interfacing cable

Quick specs

Continuous Discharge Current (A)
10
Voltage Rating (V)
7 to 22
Shipping Weight
0.12 kg
Shipping Dimensions
12 × 10 × 5 cm
See all specifications