
1 / 4 · Click to enlarge
AI Summary
The SmartElex 30D is a dual motor driver delivering 30A continuous and 85A peak per channel from 7V to 28V. It supports RC, PWM, analog, and serial control with built-in overcurrent and thermal protection.
Key Highlights
- Dual-channel driver with 30A continuous and 85A peak per channel
- Wide 7V to 28V motor voltage range
- Four operating modes: RC, PWM, analog, and serial packetized
- Overcurrent and thermal protection with LED indication
- Cooling fan and acrylic casing included
- Onboard push buttons for test and manual operation
Ideal For
- Robotics hobbyists building dual-motor robots
- RC vehicle enthusiasts upgrading to high-current drivers
- Raspberry Pi and Arduino project developers
- DIY automation and AGV builders
- Engineering students working on motor control projects
Buying Tip
Verify that your motor's continuous current draw stays below 30A per channel and that your power supply can deliver the required current, especially during peak loads.
Elecvora expert review
Our verdict
The SmartElex 30D offers impressive current handling and versatile control options in a compact package, making it a strong choice for advanced robotics and RC applications. Its integrated protection features and cooling fan add reliability for demanding use.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- High current capacity per channel
- Multiple input modes for flexible integration
- Built-in overcurrent and thermal protection
- Includes cooling fan and acrylic casing
- Onboard test buttons simplify setup
Cons
- No polarity protection requires careful wiring
- Requires separate motor power supply
- Serial packetized mode may need additional programming
Best for
Advanced robotics and RC projects needing high-current dual motor control
Not ideal for
Beginners who need plug-and-play simplicity or polarity protection
Specifications
| No. of Channels | 2 |
|---|---|
| Continuous Discharge Current (A) | 30 |
| Voltage Rating (V) | 7 to 28 |
| Peak Current (A) | 85 |
| Frequency (Hz) | 490 |
| Operating Mode | 1. Radio Control (RC), 2. Microcontroller PWM., 3. Analog, 4. Serial Packetized. |
| Overcurrent Protect. (Y/N) | Yes |
| Thermal Protection (Y/N) | Yes |
| LED Indicator | Yes |
| Cooling Fan | Yes |
| Polarity Protection (Y/N) | NO |
| Dimensions (L x W x H) mm | 115 x 76 x 52 |
| Weight (g) | 186 |
| Shipping Weight | 0.2 kg |
| Shipping Dimensions | 14 × 12 × 6 cm |
What's in the box
- 1 x SmartElex 30D Smart Motor Driver
- 1 x Interfacing Cable
- 1 x Acrylic Casing with nuts, bolts, and spacers
- 1 x DC Fan
Frequently Asked Questions
What is the maximum continuous current per channel?
Can I use this driver with a Raspberry Pi?
What input modes are supported?
What is included in the package?
Does the driver have reverse polarity protection?
How does thermal protection work?
Overview
The SmartElex 30D is a smart dual motor driver engineered for demanding robotics and RC projects. It can supply 30A continuously and handle peak currents up to 85A for 2 seconds per channel, making it suitable for powerful brushed DC motors. The driver operates from a motor voltage of 7V to 28V and offers four input modes: radio control (RC), microcontroller PWM, analog, and serial packetized. This flexibility allows you to integrate it with a wide range of controllers, from hobby RC receivers to Raspberry Pi or other microcontrollers.
Key Features
- High current capacity: 30A continuous, 85A peak (2 sec) per channel.
- Multiple control modes: RC, PWM, analog, and serial packetized, with mixed and independent modes available in RC, analog, and PWM.
- Smart protection: Overcurrent and thermal protection with LED indicators. The board reduces motor speed at 80°C and shuts down at 100°C.
- Quiet operation: MOSFETs switched at 16 kHz for silent motor control.
- Cooling fan: Integrated fan helps maintain optimal temperature during high-load operation.
- Manual control: Onboard push buttons for test and manual operation.
Specifications Explained
Current rating: The 30A continuous rating per channel means the driver can handle sustained loads from motors that draw up to 30A. The 85A peak rating (for 2 seconds) provides headroom for startup surges or brief overloads. Always ensure your power supply and wiring can support these currents.
Voltage range: The 7V to 28V range covers common battery chemistries and power supplies, from 2S LiPo (7.4V nominal) up to 6S LiPo (22.2V nominal) and 24V industrial systems. Make sure your motor is rated for the voltage you apply.
Operating modes: RC mode accepts standard servo signals from receivers. PWM mode works with microcontroller-generated pulses. Analog mode uses a 0–5V (or 0–3.3V) signal. Serial packetized mode allows precise control via TTL serial commands. Mixed and independent modes let you control two motors together or separately.
Protection features: Overcurrent protection prevents damage from excessive current draw. Thermal protection reduces speed at 80°C and shuts down at 100°C, with automatic recovery when temperature drops below 70°C. Note that polarity protection is not included, so double-check wiring before powering up.
Compatibility and Requirements
The SmartElex 30D is powered by Raspberry Pi and can interface with any RC receiver, microcontroller, or analog signal source that provides compatible signals. It requires a separate motor power supply within the 7V to 28V range. The included interfacing cable simplifies connection to your controller. Ensure your motors are brushed DC type and do not exceed the current and voltage limits.
Typical Uses
- Robotics platforms requiring dual motor control
- RC cars, tanks, and boats with brushed motors
- Automated guided vehicles (AGVs)
- DIY projects using Raspberry Pi or Arduino
- Industrial automation prototypes
What's in the Box
- 1 x SmartElex 30D Smart Motor Driver
- 1 x Interfacing Cable
- 1 x Acrylic Casing with nuts, bolts, and spacers
- 1 x DC Fan

Quick specs
- No. of Channels
- 2
- Continuous Discharge Current (A)
- 30
- Voltage Rating (V)
- 7 to 28
- Peak Current (A)
- 85
- Frequency (Hz)
- 490
- Operating Mode
- 1. Radio Control (RC), 2. Microcontroller PWM., 3. Analog, 4. Serial Packetized.


















