
1 / 3 · Click to enlarge
AI Summary
A compact single-channel automotive relay module rated 12 VDC and 10 A, built on a JYT78F-S-DC12V-A(K) relay. It gives you a simple, space-saving way to switch lights, pumps and motors from a controller or switch.
Key Highlights
- Single-channel 12 VDC relay module rated for loads up to 10 A
- Uses a JYT78F-S-DC12V-A(K) automotive relay for switching
- Slim 55.8 x 18.5 mm board weighing just 15 g
- Works with microcontrollers, control circuits and manual switches
- Suited to lights, pumps, motors and other 12 V DC loads
- Simple two-state switching for vehicle and project builds
Ideal For
- Automotive developers adding a compact 12 V switching stage
- DIY hobbyists building relay-controlled lighting or pump projects
- Engineers prototyping control circuits with microcontrollers
- Makers fitting a single relay into a tight control box
- Vehicle wiring projects needing a small 10 A relay module
Buying Tip
Confirm your load draws no more than 10 A at 12 VDC and that one channel is enough before ordering, since this module switches a single circuit.
Elecvora expert review
Our verdict
A tidy, no-frills single-channel relay module that does one job well: switching a 12 V DC load up to 10 A. Its small size and light weight make it easy to fit into vehicle and project builds.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Compact 55.8 x 18.5 mm board weighing 15 g
- Clear 10 A rating at 12 VDC for common DC loads
- Single-channel layout keeps wiring simple
- Built around a JYT78F-S-DC12V-A(K) relay
Cons
- Only one channel, so multi-load projects need several modules
- No package contents beyond the module itself are listed
- Requires a suitable 12 V DC supply and correct wiring by the user
Best for
Compact 12 V DC switching in automotive, DIY and prototyping projects
Not ideal for
Projects needing multiple switched channels or loads above 10 A
Specifications
| Item Type | Relay Module |
|---|---|
| Model No. / Name | Automotive Relay Module |
| No. of Channels | 1 |
| Operating Voltage (VDC) | 12 |
| Relay | JYT78F-S-DC12V-A(K) |
| Current Rating (A) | 10 |
| Length (mm) | 55.8 |
| Width (mm) | 18.5 |
| Weight (g) | 15 |
| Shipping Weight | 0.019 kg |
| Shipping Dimensions | 7 × 5 × 2 cm |
What's in the box
- 1 x SmartElex 12V 10A 1-Channel Automotive Relay Module
Frequently Asked Questions
What voltage does this relay module operate on?
How much current can it switch?
Can I control it with a microcontroller?
How many devices can it control at once?
What is included with the module?
How should I look after it?
Overview
The SmartElex 12V 10A 1-Channel Automotive Relay Module is a small, purpose-built switching board for 12 V DC systems. It carries a single JYT78F-S-DC12V-A(K) relay rated at 10 A, so it can interrupt or connect a load without the switching current passing through your control electronics. The board measures about 55.8 mm long and 18.5 mm wide and weighs only 15 g, which makes it easy to tuck into a vehicle loom, a control enclosure or a compact prototype.
Because it is a single-channel design, there is no unnecessary complexity: one relay, one load, clear wiring. That makes it a sensible choice for builders who want to add a reliable 12 V switching stage to a project without redesigning their whole circuit.
Key Features
- 10 A switching capacity at 12 VDC for lights, pumps, motors and similar DC equipment.
- JYT78F-S-DC12V-A(K) relay as the core switching component.
- Compact footprint of 55.8 x 18.5 mm for tight installations.
- Lightweight at 15 g, adding minimal bulk to wiring harnesses and boxes.
- Single-channel simplicity for straightforward on/off control.
- Controller-friendly design for use with microcontrollers and control circuits.
Specifications Explained
12 VDC operating voltage means the module is intended for 12 V DC systems, so check that your supply and load match before wiring it in. 10 A current rating is the ceiling for the load you switch; keep your device comfortably within that figure rather than at the limit. One channel means the module controls a single circuit, so multi-device projects need one module per switched load. The JYT78F-S-DC12V-A(K) relay is the part doing the actual contact work, and the stated dimensions and 15 g weight help you plan mounting space in advance.
Compatibility and Requirements
The module is designed for 12 V DC operation and can be integrated with microcontrollers and control circuits, as well as triggered by switches. You will need a suitable 12 V DC supply and a load that stays within the 10 A rating. Plan your wiring so the relay contacts handle the load circuit while your controller handles the trigger side.
Typical Uses
Common applications include automotive lighting, small pumps, motors and other 12 V DC accessories. It also suits DIY automation, prototyping and control-box builds where a single relay channel is enough. Engineers and automotive developers can use it as a compact switching block inside larger assemblies.
What's in the Box
One SmartElex 12V 10A 1-Channel Automotive Relay Module is supplied.
Quick specs
- Item Type
- Relay Module
- Model No. / Name
- Automotive Relay Module
- No. of Channels
- 1
- Operating Voltage (VDC)
- 12
- Relay
- JYT78F-S-DC12V-A(K)
- Current Rating (A)
- 10
















