Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact single-channel relay module rated for 12V DC operation and loads up to 20A. It lets microcontrollers and automation platforms switch heavier AC or DC equipment through one reliable relay.

Key Highlights

  • Single relay channel rated for loads up to 20A
  • 12V DC operating voltage for the relay module
  • Compact 45mm board length suits tight enclosures
  • Lightweight at approximately 12g
  • Handles both AC and DC load switching
  • Built around the JY32FNH-S-DC12V-A/20A relay

Ideal For

  • Makers building microcontroller-based switching projects
  • Home automation hobbyists controlling lights and appliances
  • DIY electronics builders working with 12V DC systems
  • Automation and control panel assemblers
  • Users needing a single high-current relay output

Buying Tip

Check that your load stays within the 20A rating and that your control setup supplies the required 12V DC before wiring the module in.

Elecvora expert review

Our verdict

A focused single-channel relay board that pairs a 20A rating with a small 45mm footprint, making it a sensible choice when one heavier load needs switching. It keeps things simple and is easy to fit into tight builds.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 20A rating handles loads beyond logic-level capability
  • Compact 45mm length and about 12g weight
  • Single channel keeps wiring and planning simple
  • Supports both AC and DC load switching

Cons

  • Only one channel, so multiple loads need multiple modules
  • Requires a 12V DC supply for module operation
  • No enclosure or mounting hardware listed in the package

Best for

Single-load switching in 12V DC automation and DIY control projects

Not ideal for

Projects needing several independently switched outputs on one board

Specifications

Item TypeRelay Module
Model No. / NamePower Relay Module
No. of Channels1
Operating Voltage (VDC)12
Current Capacity (A)Up to 20
Length (mm)45
Width (mm)05
Weight (g)12
Shipping Weight0.015 kg
Shipping Dimensions5 × 4 × 2 cm

What's in the box

  • 1 x SmartElex 12V, 20A 1-Ch Power Relay Module

Frequently Asked Questions

What can this relay module switch?
It is designed to switch AC or DC loads up to 20A, such as lights, motors, pumps and solenoids, from a low-voltage control system.
What voltage does the module need?
The module operates from a 12V DC supply. Make sure your control setup provides this voltage.
Can I use it with a microcontroller?
Yes. It is intended for low-voltage digital control systems including microcontrollers, Raspberry Pi boards and PLCs.
How many devices can it control at once?
It has one channel, so it controls a single load circuit at a time.
What is included with the module?
The package contains one SmartElex 12V, 20A 1-Ch Power Relay Module.
How should I care for the module?
Keep it dry, mount it securely and ensure the connected load stays within the 20A rating to avoid stressing the relay.

Overview

The SmartElex 12V, 20A 1-Channel Power Relay Module is a single-channel switching board built for projects that need to control heavier electrical loads from low-voltage electronics. Its one relay channel is rated for up to 20A and operates from a 12V DC supply, making it a practical interface between control signals and equipment such as lights, motors, pumps and solenoids.

With a board length of 45mm and a weight of about 12g, the module is easy to fit into compact enclosures and crowded builds. It is built around the JY32FNH-S-DC12V-A/20A relay and supports switching of both AC and DC loads within its rating.

Key Features

  • One control channel: a single relay for straightforward on/off switching tasks.
  • 20A current capacity: suited to loads that draw more current than logic-level outputs can handle.
  • 12V DC operating voltage: designed for 12V control systems and automation setups.
  • AC and DC load support: usable across a range of electrical equipment types.
  • Compact footprint: 45mm length and roughly 12g weight for tight installations.

Specifications Explained

Channels: The module has one relay channel, so it controls a single load circuit. That makes it a good fit for projects where one device or one power line needs switching.

Operating voltage: The module is specified for 12V DC operation. Match your control supply to this figure when planning the installation.

Current capacity: The relay is rated for up to 20A, which is considerably higher than the small currents handled by typical logic outputs. This is what allows the module to sit between a controller and a heavier load.

Size and weight: At 45mm long and about 12g, the board is small and light enough for compact control boxes and portable builds.

Compatibility and Requirements

The module is intended for use with low-voltage digital control systems such as microcontrollers, Raspberry Pi boards or PLCs, and it operates from a 12V DC supply. Loads connected to the relay must stay within the stated 20A capacity, and the module supports both AC and DC switching. Plan your wiring so the control side and the load side are kept separate.

Typical Uses

  • Home automation switching for lights and small appliances
  • Industrial control panels and equipment switching
  • DIY electronics projects using microcontrollers
  • Controlling motors, pumps and solenoids
  • Automation builds that need one high-current output

What's in the Box

1 x SmartElex 12V, 20A 1-Ch Power Relay Module

Quick specs

Item Type
Relay Module
Model No. / Name
Power Relay Module
No. of Channels
1
Operating Voltage (VDC)
12
Current Capacity (A)
Up to 20
Length (mm)
45
See all specifications