Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 12V four-channel relay module that switches up to 3A per channel from low-voltage control signals. Opto-isolated inputs and LED indicators make multi-device switching safer and easier to monitor.

Key Highlights

  • Four independent relay channels for switching separate loads
  • 12V DC operating voltage suits low-voltage signal control
  • Up to 3A current per channel for moderate loads
  • Opto-isolated inputs help protect against electrical noise
  • LED indicators show relay status on each channel
  • Compact 80 x 40 mm board weighing about 43 g

Ideal For

  • Makers building multi-device home automation prototypes
  • Robotics hobbyists adding switched outputs to a chassis
  • Engineers prototyping industrial control and signal switching
  • Students learning relay control with Arduino or Raspberry Pi
  • DIY builders needing four independent relay channels in one board

Buying Tip

Confirm that your control signal is 12V DC and that each device you plan to switch draws no more than 3A before wiring the module into your project.

Elecvora expert review

Our verdict

A tidy, practical four-channel relay board for projects that already work with 12V control signals. The opto-isolated inputs and per-channel LEDs make it easier to wire and troubleshoot than a bare relay setup.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Four independent channels on one compact board
  • 3A rating per channel suits many small loads
  • Opto-isolated inputs improve noise tolerance
  • LED indicators simplify testing and monitoring
  • Lightweight 43 g board fits tight enclosures

Cons

  • Requires a 12V DC control signal, which may need a separate supply
  • Loads above 3A per channel are outside its rating
  • Relay modules need careful wiring to avoid mains hazards

Best for

Makers and engineers switching several moderate loads from a 12V control system

Not ideal for

Projects needing mains-level switching beyond the stated 3A per-channel rating or non-12V control logic without adaptation

Specifications

Model No. / NameRelay Module
No. of Channels4
Operating Voltage (VDC)12
LED IndicatorYes
Length (mm)80
Width (mm)40
Weight (g)43
Shipping Weight0.052 kg
Shipping Dimensions12 × 10 × 4 cm

What's in the box

  • 1 x SmartElex 12V, 3A 4-Channel Signal Relay Module

Frequently Asked Questions

How many devices can this module control?
It has four independent relay channels, so it can switch up to four separate devices, one per channel.
What voltage does the module operate on?
The module is specified for 12V DC operation on the signal side. Plan your control wiring around a 12V supply.
How much current can each channel handle?
Each relay channel supports up to 3A. Check the current draw of each device and stay within that limit per channel.
Is it compatible with Arduino and Raspberry Pi?
The module is described as compatible with Arduino, Raspberry Pi and other microcontroller platforms, but remember the 12V operating voltage requirement for the control side.
What do the LED indicators show?
The LEDs indicate relay status, helping you see which channel is active during testing and normal use.
What is included with the module?
The package contains 1 x SmartElex 12V, 3A 4-Channel Signal Relay Module. No other accessories are listed.

Overview

The SmartElex 12V, 3A 4-Channel Signal Relay Module is a board that lets a low-voltage 12V signal control four separate higher-voltage circuits. Instead of wiring loads directly to your microcontroller, you send a signal to the module and the onboard relays do the switching. Each of the four channels is rated for up to 3A, so the board can manage several devices from one compact unit.

Opto-isolated inputs are a key part of the design: they help separate your control electronics from the switching side, reducing the chance that electrical noise causes erratic behaviour. LED indicators on each channel make it simple to see which relay is active during testing and normal operation.

Key Features

  • Four independent channels: switch four loads separately from a single board.
  • 12V DC operation: designed for low-voltage signal switching in control systems.
  • 3A per channel: enough headroom for many small pumps, lamps, fans and similar devices.
  • Opto-isolated inputs: helps protect control electronics from noise and interference.
  • LED status indicators: quick visual confirmation of each relay state.
  • Compact footprint: 80 mm long, 40 mm wide and around 43 g, so it fits into tight enclosures.

Specifications Explained

Four channels means the module can control four devices independently. If your project needs to switch several outputs but you want to keep wiring organised, one board replaces four separate relay units.

12V operating voltage refers to the signal side of the module. Plan your control wiring around a 12V supply so the inputs receive the voltage the board expects.

3A per channel is the current limit for each relay. Check the current draw of every device you plan to connect and stay within that figure per channel.

Opto-isolated inputs add a layer of separation between the control signal and the relay coils, which helps in electrically noisy environments such as motor-driven systems.

Compatibility and Requirements

The module is described as compatible with Arduino, Raspberry Pi and other microcontroller platforms. Because the operating voltage is 12V DC, the control side should be driven by a suitable 12V signal arrangement rather than assumed to run directly from a lower logic level. Always confirm your control setup matches the 12V input requirement before connecting loads.

Typical Uses

  • Smart home automation with multiple switched devices
  • Industrial control panels and signal switching
  • Robotics and embedded systems projects
  • DIY multi-device control builds
  • Prototyping setups that need four independent outputs

What's in the Box

1 x SmartElex 12V, 3A 4-Channel Signal Relay Module.

Quick specs

Model No. / Name
Relay Module
No. of Channels
4
Operating Voltage (VDC)
12
LED Indicator
Yes
Length (mm)
80
Width (mm)
40
See all specifications