Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by SmartElex, this smartelex multiplexer modules is a good fit for makers, students and electronics hobbyists. Main specs: item type Expander Breakout Module; channels 16; power supply voltage (v) 5. Check that your power source supplies 5 before connecting it.

Key Highlights

  • Item Type: Expander Breakout Module
  • Channels: 16
  • Power Supply Voltage (V): 5

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeExpander Breakout Module
Compatibility400 kHz I2C
Channels16
Power Supply Voltage (V)5
Shipping Weight0.01 kg
Shipping Dimensions5 × 5 × 2 cm

Overview

The SmartElex 16 Output I/O Expander Breakout - SX1509, made by SmartElex, is listed in our smartelex multiplexer modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Expander Breakout Module
  • Compatibility: 400 kHz I2C (make sure the rest of your system works at this frequency)
  • Channels: 16
  • Power Supply Voltage (V): 5 (match this to your power supply; too high a voltage can damage the part)
  • Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 5 × 5 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Are you low on I/O? No problem! The SX1509 Breakout is a 16-channel GPIO expander with an I2C interface – that means with just two wires, your microcontroller can interface with 16 fully configurable digital input/output pins. But the SX1509 can do so much more than just simple digital pin control. It can produce PWM signals, so you can dim LEDs. It can be set to blink or even breathe pins at varying rates. This breakout is similar to a multiplexer or "mux," in that it allows you to get more IO from less pins. And, with a built-in keypad engine, it can interface with up to 64 buttons set up in an 8x8 matrix. Two headers at the top and bottom of the breakout board function as the input and control headers to the board. This is where you can supply power to the SX1509, and where your I2C signals – SDA and SCL – will terminate. GPIO and power buses are broken out in every-which direction, and configurable jumpers cover most of the rest of the board. Since the I/O banks can operate between 1.2V and 3.6V (5.5V tolerant) independent of both the core and each other, this device can also work as a level-shifter. The SX1509 breakout makes it easy to prototype so you can add more I/O onto your Arduino or I/O limited controller. We've even spun up an Arduino Library to get you started!

Features:

  1. Enable Direct Level Shifting Between I/O Banks and Host Controller
  2. 5.5V Tolerant I/Os, Up to 15mA Output Sink on All I/Os
  3. Integrated LED Driver with Intensity Control
  4. On-Chip Keypad Scanning Engine Supports Up to 8x8 Matrix (64 Keys)
  5. 16 Channels of True Bi-directional Style I/O
  6. 400kHz I2C Compatible Slave Interface

Package Includes:

1 x SmartElex 16 Output I/O Expander Breakout - SX1509

1 x Header Pin Set.

Quick specs

Item Type
Expander Breakout Module
Compatibility
400 kHz I2C
Channels
16
Power Supply Voltage (V)
5
Shipping Weight
0.01 kg
Shipping Dimensions
5 × 5 × 2 cm
See all specifications