
1 / 3 · Click to enlarge
AI Summary
A dual bidirectional level translator breakout that connects I2C and SMBus devices running at different logic voltages. Set your reference voltages on VREF1 and VREF2 and it shifts signals both ways with no direction pin needed.
Key Highlights
- Dual bidirectional translation for I2C and SMBus buses
- Low side from 1.2V to 3.3V, high side from 1.8V to 5.5V
- No direction pin required for two-way signal shifting
- Updated footprint with extra ground pin and broken-out enable pin
- Compact breakout board with header pin set included
- Supply voltage range of 3.3V to 5.5V
Ideal For
- Embedded engineers mixing 3.3V and 5V I2C peripherals
- Students learning bus-level voltage translation
- Makers retrofitting 5V displays onto 3.3V controllers
- Repair technicians working on mixed-voltage boards
- Prototypers building compact SMBus sensor nodes
Buying Tip
Check that your low-side signals stay at or below 3.3V and your high-side signals at or below 5.5V before wiring the breakout into a live bus.
Elecvora expert review
Our verdict
A tidy, purpose-built breakout that removes the guesswork from mixing I2C and SMBus devices at different voltages. The added ground and enable pins make the updated version noticeably easier to integrate.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Bidirectional translation with no direction pin to manage
- Broad low-side and high-side voltage windows
- Extra ground pin and accessible enable pin
- Small footprint suits compact builds
- Header pin set included for immediate assembly
Cons
- Limited to I2C and SMBus use cases
- Requires soldering or breadboard assembly of the header
- No onboard regulators, so reference voltages must come from your circuit
Best for
Mixed-voltage I2C and SMBus projects
Not ideal for
High-speed differential buses or power-level conversion
Specifications
| Item Type | Level Translator Breakout Module |
|---|---|
| Power Supply Voltage (V) | 3.3 to 5.5 |
| Communication Bus | I2C and SMBus |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 5 × 5 × 2 cm |
What's in the box
- 1 x SmartElex Level Translator Breakout - PCA9306
- 1 x Header Pin Set
Frequently Asked Questions
Do I need to set a direction for reads and writes?
What voltages can each side handle?
Which buses does this module support?
What comes in the package?
How do I connect the reference voltages?
What is the enable pin for?
Overview
The SmartElex PCA9306 Level Translator Breakout solves a common problem in mixed-voltage electronics: getting devices that speak I2C or SMBus at different logic levels to share the same bus safely. Instead of adding complex circuitry, you apply your two reference voltages to the VREF1 and VREF2 pins, connect your signal lines, and the module handles translation in both directions automatically.
This updated revision of the breakout brings a new footprint, an additional ground pin and a dedicated enable pin broken out for easier wiring. It is a practical building block for anyone combining modern 3.3V modules with older 5V hardware.
Key Features
- Dual bidirectional operation: translates signals in both directions on the bus without a direction control pin.
- Wide voltage window: the low side accepts 1.2V to 3.3V and the high side accepts 1.8V to 5.5V.
- I2C and SMBus ready: designed around the communication buses most sensors, displays and controllers use.
- Improved layout: extra ground pin and accessible enable pin make breadboard and PCB wiring cleaner.
- Small form factor: shipping dimensions of 5 x 5 x 2 cm keep it easy to tuck into tight builds.
Specifications Explained
The 3.3V to 5.5V supply range covers the logic levels found in most hobby and embedded systems, so the board suits projects built around common microcontrollers and peripherals. The low-side range of 1.2V to 3.3V and high-side range of 1.8V to 5.5V mean you can pair a low-voltage sensor with a higher-voltage controller or the other way around, as long as each side sits inside its window.
Because the module is bidirectional, you do not need to set a direction pin for reads and writes. That keeps firmware simple and wiring tidy. The enable pin gives you a way to control the translator without removing it from the circuit, while the extra ground pin helps when several grounds need to meet at the board.
Compatibility and Requirements
Use this breakout with I2C or SMBus devices only, and confirm that each side of your circuit falls within the stated voltage ranges. You will need to supply the two reference voltages to VREF1 and VREF2, and you should have basic soldering or breadboard skills to fit the included header pin set. No direction pin configuration is required.
Typical Uses
- Connecting 3.3V I2C sensors to a 5V controller board.
- Linking displays, expanders or real-time clocks that use different logic levels.
- Prototyping mixed-voltage SMBus systems on a breadboard.
- Repairing or upgrading existing boards where bus voltages do not match.
What's in the Box
- 1 x SmartElex Level Translator Breakout - PCA9306
- 1 x Header Pin Set
Quick specs
- Item Type
- Level Translator Breakout Module
- Power Supply Voltage (V)
- 3.3 to 5.5
- Communication Bus
- I2C and SMBus
- Shipping Weight
- 0.01 kg
- Shipping Dimensions
- 5 × 5 × 2 cm



















