Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The SmartElex 2-CH CAN HAT adds two independent CAN Bus channels to Raspberry Pi 4/3/2/Zero via the 40-pin header. It uses MCP2515 controllers and TJA1050 transceivers for stable communication up to 1 Mbps, with configurable 120Ω termination.

Key Highlights

  • Dual independent CAN Bus channels for simultaneous communication
  • MCP2515 CAN controller with SPI interface
  • TJA1050 transceivers for stable signal output
  • Compatible with Raspberry Pi 4/3/2/Zero 40-pin boards
  • User-configurable 120Ω termination resistors
  • Onboard TX/RX LEDs and ESD protection

Ideal For

  • Automotive electronics hobbyists working with ECUs
  • Robotics developers integrating CAN Bus motor controllers
  • Industrial automation engineers prototyping sensor networks
  • Raspberry Pi enthusiasts learning CAN Bus communication

Buying Tip

Check that your Raspberry Pi model has a 40-pin header and that you have the correct SPI and CAN libraries installed for the MCP2515 controller.

Elecvora expert review

Our verdict

The SmartElex 2-CH CAN HAT offers a straightforward way to add dual CAN Bus connectivity to a Raspberry Pi. Its MCP2515 and TJA1050 combination is well understood, and the configurable termination and status LEDs are useful for debugging.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Dual independent CAN channels
  • Configurable 120Ω termination
  • Onboard TX/RX LEDs
  • Stackable HAT form factor
  • ESD protection

Cons

  • Requires software configuration for MCP2515
  • No galvanic isolation mentioned
  • Raspberry Pi not included

Best for

Raspberry Pi users needing two CAN Bus interfaces in one compact HAT

Not ideal for

Projects requiring isolated CAN or higher than 1 Mbps signaling

Specifications

Item TypeHAT
Model No. / NameCAN HAT
Number of Channels2 (Dual CAN Bus)
CompatibilityRaspberry Pi 4/3/2/Zero
Operating Temperature (°C)up to 85
Length (mm)65
Width (mm)56
Weight (g)29
Shipping Weight0.048 kg
Shipping Dimensions11 × 8 × 4 cm

What's in the box

  • 1 x SmartElex 2-CH CAN HAT

Frequently Asked Questions

Which Raspberry Pi models are compatible with this HAT?
It works with Raspberry Pi 4, 3, 2, and Zero models that have a 40-pin GPIO header.
How do I connect the HAT to my Raspberry Pi?
The HAT plugs directly onto the 40-pin header. It communicates with the Pi over SPI, so you need to enable SPI in your operating system.
What is the maximum CAN signaling rate?
The HAT supports signaling rates up to 1 Mbps per channel.
Are termination resistors included?
Yes, the board has user-configurable 120Ω termination resistors for each CAN channel.
What is included in the package?
The package includes one SmartElex 2-CH CAN HAT. Raspberry Pi and cables are not included.
What operating temperature is supported?
The HAT operates in temperatures up to 85°C.

Overview

The SmartElex 2-CH CAN HAT is a dual-channel CAN Bus interface designed for Raspberry Pi boards with a 40-pin header. It lets your Pi communicate with CAN-enabled devices such as ECUs, motor controllers, and sensors, making it a practical add-on for automotive, robotics, and industrial control projects. The HAT combines MCP2515 CAN controllers with TJA1050 transceivers to support signaling rates up to 1 Mbps.

Key Features

  • Dual independent CAN channels: Two separate CAN Bus interfaces allow your Raspberry Pi to manage two CAN networks at once.
  • MCP2515 controller and TJA1050 transceiver: These proven components provide reliable CAN communication over an SPI interface.
  • Configurable 120Ω termination: User-selectable resistors help match the bus impedance for stable signaling.
  • Status LEDs: Onboard TX and RX indicators show channel activity at a glance.
  • Stackable HAT design: The board follows the HAT form factor and can be stacked with other compatible add-ons.
  • ESD protection: Built-in protection helps safeguard the board in electrically noisy environments.

Specifications Explained

Two CAN channels: Each channel operates independently, so you can connect the Pi to two different CAN buses without external multiplexing. MCP2515 and TJA1050: The MCP2515 handles CAN protocol control and communicates with the Pi over SPI; the TJA1050 converts logic-level signals to CAN bus levels. Up to 1 Mbps: This signaling rate covers most automotive and industrial CAN applications. 120Ω termination: Proper termination is essential for reliable high-speed CAN; the onboard resistors can be enabled or disabled as needed. Temperature range: The HAT is rated for operating temperatures up to 85°C, suitable for many rugged environments. Dimensions: At 65 mm × 56 mm and 29 g, it fits neatly on top of a Raspberry Pi.

Compatibility and Requirements

The SmartElex 2-CH CAN HAT is compatible with Raspberry Pi 4, 3, 2, and Zero models that have a 40-pin GPIO header. It requires a host Raspberry Pi (not included) and a properly configured SPI interface. The HAT communicates over SPI, so no additional USB adapter is needed. Ensure your Pi has the necessary software support for the MCP2515 controller.

Typical Uses

  • Automotive diagnostics and ECU communication
  • Robotics projects requiring CAN Bus control
  • Industrial automation and sensor networks
  • Learning and experimenting with CAN Bus protocols

What's in the Box

1 x SmartElex 2-CH CAN HAT

Quick specs

Item Type
HAT
Model No. / Name
CAN HAT
Number of Channels
2 (Dual CAN Bus)
Compatibility
Raspberry Pi 4/3/2/Zero
Operating Temperature (°C)
up to 85
Length (mm)
65
See all specifications