Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 2-channel relay board that switches up to 250V AC at 10A or 30V DC at 10A from a 3.3V to 5V logic signal. Low-level triggering, status LEDs and diode protection make it a tidy way to add mains or high-current switching to a project.

Key Highlights

  • Two relay channels with low-level trigger operation
  • Accepts 3.3V to 5V control signals from logic devices
  • Switches AC 250V at 10A and DC 30V at 10A
  • Diode current protection against back EMF
  • Separate LED indication for each relay channel
  • Four mounting holes for panel or enclosure fitting

Ideal For

  • Makers building home automation and smart switching projects
  • Electronics students learning relay control with microcontrollers
  • Prototypers needing to switch AC or DC loads from logic signals
  • Industrial control experimenters working with 3.3V or 5V logic

Buying Tip

Check the inrush current of your load, not just its running current, and keep it comfortably below the 10A contact rating before wiring the relay in.

Elecvora expert review

Our verdict

A straightforward two-channel relay board with sensible protection and clear status indication, well suited to logic-level projects. It is a practical choice when you need to switch modest AC or DC loads from a 3.3V or 5V controller.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Works with both 3.3V and 5V logic signals
  • Diode protection helps protect the driving circuit
  • Individual LEDs make relay state easy to read
  • Four mounting holes simplify installation

Cons

  • Requires a separate 5V supply for the relay coils
  • Low-level trigger may need logic inversion in some setups
  • Load must stay within the stated AC and DC ratings

Best for

Makers and prototypers switching small AC or DC appliances from a microcontroller

Not ideal for

High-power or high-frequency switching applications beyond the stated ratings

Specifications

Item Type2-Channel Relay Module
Relay ModuleLow-level trigger
Channels1
Input Voltage (V)05
Control Signal Voltage (V)3.3 to 5
Control VoltageAC 250V at 10A, DC 30V at 10A
ProtectionDiode current protection
Mounting Hole Diameter (mm)3.1
Shipping Weight0.03 kg
Shipping Dimensions6 × 5 × 3 cm

What's in the box

  • 1 x SmartElex 5V, 10A 2-Channel Relay Module

Frequently Asked Questions

What does low-level trigger mean on this relay module?
It means the relay activates when the control input is pulled low. Your controller should bring the input to a low state to switch the channel on.
Can I use this module with a 3.3V microcontroller?
Yes. The control signal voltage range is 3.3V to 5V, so both 3.3V and 5V logic devices can drive the inputs.
What loads can the relays switch?
The contacts are rated for AC 250V at 10A and DC 30V at 10A. Keep your load within these limits and account for start-up current surges.
Does the board need a separate power supply?
Yes. The module has a 5V input voltage for the relay coils, separate from the control signal coming from your microcontroller.
How do I know when a relay is on?
Each channel has its own LED that indicates the relay status, so you can check operation without measuring the contacts.
What is included with the module?
The package contains one SmartElex 5V, 10A 2-Channel Relay Module. Wiring and a controller are not included.

Overview

The SmartElex 5V 10A 2-Channel Relay Module is a switching board built for projects that need a small control signal to operate a larger load. It takes a logic-level input from a microcontroller or similar device and uses it to energise the onboard relays, which in turn switch the connected appliance or circuit. The module uses low-level triggering, so the relay activates when the input is pulled low.

Because the control signal range covers 3.3V to 5V, the board fits neatly into builds based on common logic devices without needing a separate level shifter. The relay contacts are rated for AC 250V at 10A and DC 30V at 10A, which covers many everyday lamps, fans, pumps and other small appliances.

Key Features

  • Low-level trigger design: the relay engages when the control input goes low, which suits many microcontroller output configurations.
  • Wide logic compatibility: accepts control signals from 3.3V to 5V devices.
  • Dual status LEDs: each channel has its own LED so you can see at a glance whether a relay is on.
  • Diode current protection: helps protect the driving circuit from back EMF when the relay coil switches off.
  • Mounting holes: four holes with a 3.1mm diameter make the board easy to secure.

Specifications Explained

Channels: the board is described as a 2-channel relay module, giving you two independently switchable relays in one compact unit.

Input and control voltage: the module runs from a 5V supply, while the control signal can be anywhere from 3.3V to 5V. That means a 3.3V logic board and a 5V logic board can both drive it.

Contact rating: the relay contacts are rated for AC 250V at 10A and DC 30V at 10A. Always keep the load within these limits and allow margin for inrush current from motors or capacitive loads.

Protection: diode current protection is included to help absorb the voltage spike produced when a relay coil is de-energised.

Compatibility and Requirements

The module is designed for logic-level control signals between 3.3V and 5V, so it can be driven by microcontrollers and development boards that output in that range. It requires a 5V supply for the relay coils. The relay contacts are separate from the control side, so the switched load can be an AC or DC circuit within the stated ratings. Wiring to the relay terminals and to the control header is required; plan your connections and enclosure layout before powering the load.

Typical Uses

  • Switching lamps or small appliances in home automation projects
  • Controlling pumps, fans or solenoids in prototype systems
  • Industrial control and automation experiments
  • General electronics prototyping where a logic signal must drive a higher-power circuit

What's in the Box

1 x SmartElex 5V, 10A 2-Channel Relay Module.

Quick specs

Item Type
2-Channel Relay Module
Relay Module
Low-level trigger
Channels
1
Input Voltage (V)
05
Control Signal Voltage (V)
3.3 to 5
Control Voltage
AC 250V at 10A, DC 30V at 10A
See all specifications