Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by SmartElex, this smartelex audio modules is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Active Buzzer Module; working voltage 3.5 to 5.5; working current (ma) <25mA. Check that your power source supplies 3.5 to 5.5 before connecting it.

Key Highlights

  • Model No. / Name: Active Buzzer Module
  • Working Voltage: 3.5 to 5.5
  • Working Current (mA): <25mA

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameActive Buzzer Module
Working Voltage3.5 to 5.5
Working Current (mA)<25mA
PCB Board Size (mm)18.5 × 15
Shipping Weight0.01 kg
Shipping Dimensions5 × 5 × 3 cm

Overview

The SmartElex Active Buzzer Module, made by SmartElex, is listed in our smartelex audio modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: Active Buzzer Module
  • Working Voltage: 3.5 to 5.5 (match this to your power supply; too high a voltage can damage the part)
  • Working Current (mA): <25mA (your supply must deliver at least this much current)
  • PCB Board Size (mm): 18.5 × 15 (measure your mounting space before ordering)
  • Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 5 × 5 × 3 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

A Standard Active Alarm Module for Arduino is an audio signaling device, which may be mechanical, electromechanical, or piezoelectric. This PCB Mounted Active Buzzer Module can produce a range of sound tones depending on the input frequency, i.e it can generate tones between 1.5 to 2.5 kHz by switching it on and off at different frequencies either using delays or PWM. An active buzzer rings out as long as it is electrified. Compared with a passive buzzer, it is a bit expensive but easier to control. Typical uses of buzzers include alarm devices, timers, and confirmation of user input such as a mouse click or keystroke. This module is ideally suited to adding noise to your project and is compatible with a pin pitch of 2.54mm while functioning with microcontrollers such as the Arduino. This module lets you respond to programmatic changes with a lovely annoying buzzer that can be altered over a range of frequencies to ensure maximum irritation. To operate the I/O pin must receive a square wave to trigger the buzzer. This can be produced within all popular microcontrollers.

Specifications:

  1. Working voltage: 3.5-5.5V
  2. Working current: <25mA
  3. PCB Dimension: 1.85 x 1.5 cm (L x W)

Features:

  1. An active buzzer with a concussion internal source- so long as it will be called an energized
  2. The program easy to control- SCM can let a high-low sound- while passive buzzer did not.
  3. The Transistor drive module uses 8550
  4. With fixed bolt hole- easy installation- 2.6mm aperture.

Package Includes:

1 x SmartElex Active Buzzer Module

1 x Connecting Cable

 

Quick specs

Model No. / Name
Active Buzzer Module
Working Voltage
3.5 to 5.5
Working Current (mA)
&lt;25mA
PCB Board Size (mm)
18.5 × 15
Shipping Weight
0.01 kg
Shipping Dimensions
5 × 5 × 3 cm
See all specifications