
1 / 3 · Click to enlarge
At a glance
Made by SmartElex, this smartelex programmer modules is a good fit for makers, students and electronics hobbyists. Main specs: item type Programmer Module; based on TTL; voltage rating (v) 3.3V or 5V. Check that your power source supplies 3.3V or 5V before connecting it.
Key Highlights
- Item Type: Programmer Module
- Based On: TTL
- Voltage Rating (V): 3.3V or 5V
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Programmer Module |
|---|---|
| Based On | TTL |
| Voltage Rating (V) | 3.3V or 5V |
| Chipset | Silicon Labs CP2102 |
| Baud Rate (bps) | 300 bps to 1 Mbps |
| LED Indicator | Yes |
| Supported Operating Systems | Windows XP/7/8/10/11, macOS, Linux, Android, WinCE |
| Maximum Output Current (A) | 500mA (USB-powered) |
| Length (mm) | 40 |
| Width (mm) | 20 |
| Shipping Weight | 0.011 kg |
| Shipping Dimensions | 10 × 10 × 2 cm |
Overview
The SmartElex CP2102 Type C, USB To UART (TTL) Communication Module, made by SmartElex, is listed in our smartelex programmer modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Programmer Module
- Based On: TTL
- Voltage Rating (V): 3.3V or 5V (match this to your power supply; too high a voltage can damage the part)
- Chipset: Silicon Labs CP2102 (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Baud Rate (bps): 300 bps to 1 Mbps
- LED Indicator: Yes
- Supported Operating Systems: Windows XP/7/8/10/11, macOS, Linux, Android, WinCE (confirm your cable or board uses the same connector)
- Maximum Output Current (A): 500mA (USB-powered) (your supply must deliver at least this much current)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The SmartElex CP2102 USB to UART Communication Module with a modern USB Type-C interface is a powerful and reliable solution for serial communication between USB and TTL-level devices. Featuring the Silicon Labs CP2102 chipset, this module supports a wide range of operating systems including Windows, macOS, Linux, and Android. It provides selectable 3.3V or 5V output via jumper and supports baud rates from 300 bps to 1 Mbps. Integrated with a voltage regulator, power-on reset, EEPROM, and full-speed USB 2.0 compliance, this module is ideal for developers working with embedded systems, data logging, and microcontroller communication.
Applications:
- Programming and debugging microcontrollers
- Serial communication with embedded systems
- USB to TTL conversion for various devices
- Data logging and monitoring
Cautions:
- Ensure correct voltage selection using the onboard jumper to prevent damage.
- This module is designed for TTL level signals; do not connect directly to RS232 interfaces.
- Avoid exposure to moisture and static discharge.
Features:
- Silicon Labs CP2102 Chipset – Ensures stable and efficient USB-to-UART conversion.
- USB Type-C Interface – Offers compatibility with modern devices and reversible connectivity.
- Selectable Voltage Output – Supports 3.3V or 5V via onboard jumper for wide MCU compatibility.
- Cross-Platform Support – Compatible with Windows, macOS, Linux, Android, and WinCE.
- Baud Rate Range – Supports data transfer from 300 bps to 1 Mbps.
- Integrated EEPROM – 1024-byte EEPROM allows for customizable configurations.
- Built-in Voltage Regulator & Reset Circuit – Simplifies circuit design and stability.
- USB 2.0 Full-Speed Compliance – Supports data rates up to 12 Mbps.
- Comprehensive UART Interface – Supports full handshaking, modem signals, and various data formats.
- LED Status Indicators – TXD, RXD, and Power LEDs offer real-time debugging visibility.
Package Includes:
1 x SmartElex CP2102 Type-C USB to UART (TTL) Communication Module
1 x 6 pin right angle male pin header
1 x 6 pin female to female jumper wire
2 x 4 pin straight male pin header
1 x 2 pin shunt
1 x 3 pin straight male pin header
Quick specs
- Item Type
- Programmer Module
- Based On
- TTL
- Voltage Rating (V)
- 3.3V or 5V
- Chipset
- Silicon Labs CP2102
- Baud Rate (bps)
- 300 bps to 1 Mbps
- LED Indicator
- Yes
















