Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact ESP32-C6 development board in the Raspberry Pi Pico form factor, with Wi-Fi 6, Bluetooth 5, Zigbee and Thread wireless support. Its 27 multi-function GPIOs and 4 MB flash make it a flexible base for connected prototypes and smart-home nodes.

Key Highlights

  • ESP32-C6-MINI-1 module with 32-bit RISC-V single-core processor
  • Wi-Fi 6, Bluetooth 5 and IEEE 802.15.4 for Zigbee 3.0 and Thread
  • 512 KB HP SRAM, 16 KB LP SRAM and 4 MB flash storage
  • 27 multi-function GPIO pins plus 7 expanded IOs
  • Raspberry Pi Pico expansion board footprint with USB Type-C
  • Onboard MP28164 buck-boost regulator rated up to 2 A

Ideal For

  • IoT developers prototyping connected sensor nodes
  • Smart-home makers building Zigbee 3.0 or Thread devices
  • Students learning RISC-V and embedded wireless programming
  • Makers with Raspberry Pi Pico carrier boards and accessories
  • Product teams evaluating compact Wi-Fi 6 modules

Buying Tip

Check that your Pico carrier board or project leaves access to the USB Type-C port and the pins you plan to use before soldering the supplied headers.

Elecvora expert review

Our verdict

A well-rounded board for anyone who wants Wi-Fi 6, Bluetooth 5 and Zigbee or Thread support in a Pico-friendly footprint. The pin count and onboard regulator make it practical for real prototypes rather than just demos.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Three wireless standards on one board
  • 27 multi-function GPIOs plus 7 expanded IOs
  • Raspberry Pi Pico expansion compatibility
  • USB Type-C and a 2 A buck-boost regulator
  • Compact 58.7 x 21 mm size

Cons

  • Headers ship loose and need soldering
  • 4 MB flash may be tight for larger firmware images
  • No antenna or cable details are specified in the product data

Best for

Makers and developers building connected IoT and smart-home prototypes

Not ideal for

Projects that need large onboard storage or pre-soldered headers

Specifications

Item TypeDevelopment Board
Model No. / NameESP32 C6 Pico
RAM512 KB HP SRAM + 16 KB LP SRAM
Processor TypeRISC-V 32-bit single-core
MicrocontrollerESP32-C6-MINI-1
Storage Capacity4 MB Flash
Wireless communicationWi-Fi 6, Bluetooth 5, IEEE 802.15.4 (Zigbee 3.0 & Thread)
GPIO Pins27 multi-function + 7 expanded IO
Connector TypeRaspberry Pi Pico expansion boards
Length (mm)58.7
Width (mm)21
Weight (g)07
Shipping Weight0.012 kg
Shipping Dimensions7 × 5 × 2 cm

What's in the box

  • 1 x SmartElex ESP32-C6-Mini-1-N4 Pico Development Board
  • 2 x Header Pin

Frequently Asked Questions

What wireless standards does this board support?
It supports Wi-Fi 6, Bluetooth 5 and IEEE 802.15.4, which covers Zigbee 3.0 and Thread.
Is it compatible with Raspberry Pi Pico accessories?
Yes. The board uses the Raspberry Pi Pico expansion board format, so Pico-compatible carriers and accessories can be used.
How is the board powered?
It uses a USB Type-C connector for power and data, and it includes an MP28164 buck-boost regulator rated up to 2 A.
How much memory and storage does it have?
It has 512 KB of high-performance SRAM, 16 KB of low-power SRAM and 4 MB of flash storage.
Do the header pins come attached?
No. The package includes two header pins, but they are supplied separately and need to be soldered if you want to use them.
Which processor does the board use?
It uses a 32-bit RISC-V single-core processor on the ESP32-C6-MINI-1 module.

Overview

The SmartElex ESP32-C6-Mini-1-N4 Pico is a small development board designed around the ESP32-C6-MINI-1 module. At its centre is a 32-bit RISC-V single-core processor, supported by 512 KB of high-performance SRAM, 16 KB of low-power SRAM and 4 MB of flash. The board measures 58.7 mm by 21 mm and weighs around 7 g, so it fits neatly into compact enclosures and handheld projects.

Wireless connectivity is the standout part of this design. The board supports Wi-Fi 6, Bluetooth 5 and IEEE 802.15.4, which covers Zigbee 3.0 and Thread. That combination lets one board handle direct network access, short-range device links and low-power mesh protocols without adding extra radio hardware.

Key Features

  • ESP32-C6-MINI-1 module: a RISC-V 32-bit single-core microcontroller with 4 MB of flash.
  • Triple wireless support: Wi-Fi 6, Bluetooth 5 and IEEE 802.15.4 for Zigbee 3.0 and Thread.
  • Generous I/O: 27 multi-function GPIO pins plus 7 expanded IOs for sensors, displays and drivers.
  • Pico-format connector: designed to work with Raspberry Pi Pico expansion boards.
  • USB Type-C: a modern, reversible connector for power and data.
  • Onboard DC-DC regulator: an MP28164 buck-boost converter rated up to 2 A.

Specifications Explained

Processor and memory

The RISC-V single-core processor keeps the design simple and power-conscious. The 512 KB HP SRAM handles active workloads, while the 16 KB LP SRAM supports low-power operation. The 4 MB flash gives you room for firmware, libraries and small file storage.

Wireless radios

Wi-Fi 6 improves efficiency on crowded networks. Bluetooth 5 covers device pairing and short-range links. IEEE 802.15.4 support means the board can join Zigbee 3.0 or Thread networks, which is useful for smart-home and building-automation projects.

GPIO and expansion

With 27 multi-function GPIOs and 7 expanded IOs, the board offers plenty of pins for buttons, sensors, relays and displays. Because it uses the Raspberry Pi Pico expansion format, it can be paired with Pico-compatible carrier boards and accessories.

Power

The MP28164 buck-boost regulator is rated up to 2 A, helping the board hold a stable supply across a range of input voltages. Low-power modes are supported for designs that need to conserve energy.

Compatibility and Requirements

The board is intended for Raspberry Pi Pico expansion boards. It uses a USB Type-C connector for power and data, and the included header pins let you solder it into a carrier or breadboard setup. Peripheral interfaces include USB OTG, SPI, I2C, UART, ADC and PWM.

Typical Uses

  • Connected sensor nodes and IoT prototypes
  • Zigbee 3.0 and Thread smart-home devices
  • Bluetooth 5 accessories and gateways
  • Educational and embedded-systems projects
  • Compact Pico-format builds that need wireless connectivity

What's in the Box

  • 1 x SmartElex ESP32-C6-Mini-1-N4 Pico Development Board
  • 2 x Header Pin

Quick specs

Item Type
Development Board
Model No. / Name
ESP32 C6 Pico
RAM
512 KB HP SRAM + 16 KB LP SRAM
Processor Type
RISC-V 32-bit single-core
Microcontroller
ESP32-C6-MINI-1
Storage Capacity
4 MB Flash
See all specifications