Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact industrial USB-to-UART module that provides four independent TTL serial channels from a single USB connection. It lets you communicate with several embedded or automation devices at once while TX/RX LEDs show activity on each channel.

Key Highlights

  • Four independent TTL UART channels from one USB port
  • Full-duplex serial communication on every channel
  • TX and RX status LEDs for quick activity checks
  • Industrial-grade compact PCB module design
  • Single USB interface reduces adapter clutter
  • Supports multiple baud rates for flexible setups

Ideal For

  • Embedded developers debugging multiple boards at once
  • Industrial automation engineers working with serial devices
  • Test bench technicians who need several UART links
  • Makers building multi-device serial projects
  • Integrators replacing several single-port USB adapters

Buying Tip

Check that your target devices use TTL-level UART signals and note each device's baud rate before wiring, since the module provides four separate channels that are configured independently.

Elecvora expert review

Our verdict

A practical choice when a project outgrows a single serial adapter, since four independent full-duplex channels share one USB connection and keep a bench tidy. The compact industrial board with TX/RX LEDs is easy to monitor, though you must handle TTL-level wiring carefully.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Four independent UART channels in one module
  • Full-duplex communication on every channel
  • TX/RX LEDs make activity easy to see
  • Compact industrial PCB form factor
  • Includes four connecting wires

Cons

  • Requires correct TTL-level wiring and pin checks
  • No detailed software or driver information supplied
  • Channel configuration must be handled per device

Best for

Engineers and makers who need several TTL serial links from one computer

Not ideal for

Users who only need a single serial connection or cannot work with bare TTL pins

Specifications

Shipping Weight0.098 kg
Shipping Dimensions11 × 8 × 4 cm

What's in the box

  • 1 x SmartElex Industrial USB TO 4CH TTL Converter
  • 4 x connecting wires

Frequently Asked Questions

How many serial devices can I connect at once?
The module provides four independent TTL UART channels, so up to four serial devices can be connected through the single USB interface.
Does each channel work independently?
Yes. The four channels are independent and support full-duplex UART communication, so each one can be configured for its own connected device.
What logic level does the board use?
The converter uses TTL logic levels. Check the voltage and pin order of your target device before connecting it.
What is included with the converter?
The package contains one SmartElex Industrial USB TO 4CH TTL Converter and four connecting wires.
Can I see whether data is being sent and received?
Yes. On-board TX and RX status LEDs indicate serial activity on the channels.
How should I store and handle the module?
Keep the board dry and free of static discharge, and avoid connecting or disconnecting wires while the circuit is powered.

Overview

The SmartElex Industrial USB TO 4CH TTL Converter is a USB-to-UART module built for situations where one serial port is not enough. Instead of adding several single-channel adapters, you connect this board once and get four independent TTL UART channels. Each channel handles full-duplex communication, so transmit and receive lines work at the same time.

The module is designed to industrial-grade standards and presented as a compact PCB board measuring approximately 102.5 x 46 x 19.8 mm. TX/RX status LEDs on the board give you a quick visual check of serial activity without opening a terminal window.

Key Features

  • Four independent channels: each UART works separately, so multiple devices can be connected and addressed at once.
  • Single USB interface: one host connection serves all four serial channels.
  • Full-duplex UART: simultaneous transmit and receive on each channel.
  • TX/RX LEDs: on-board indicators show data direction and activity.
  • Multiple baud rates: configure the serial speed to match each connected device.
  • Compact industrial form factor: a small PCB module suited to bench and panel installations.

Specifications Explained

USB to TTL UART interface: the board bridges a USB host port to TTL-level serial signals, which is the logic level used by most embedded boards and microcontrollers.

Four independent channels: the channel count is the main reason to choose this module. It means four separate serial links rather than a single shared line, which is useful when devices must stay connected continuously.

Full-duplex communication: TX and RX are separate, so a device can send and receive at the same time, matching normal UART behaviour.

Logic level TTL: connect only to TTL-level serial pins. Check the voltage level of your target device before wiring.

Dimensions and weight: the board measures about 102.5 x 46 x 19.8 mm and weighs around 0.055 kg, with shipping weight listed at 0.098 kg.

Compatibility and Requirements

The converter works with devices that expose TTL-level UART signals and with host systems supported by the module's USB interface. You will need a free USB port on your computer and suitable wiring between the board and each target device; four connecting wires are included. Confirm the logic level and pin order of every device before connecting, and use the correct serial settings such as baud rate for each channel.

Typical Uses

  • Debugging and monitoring several embedded boards from one computer
  • Industrial automation setups with multiple serial devices
  • Firmware flashing and console access on development benches
  • Data logging from more than one UART source at a time

What's in the Box

  • 1 x SmartElex Industrial USB TO 4CH TTL Converter
  • 4 x connecting wires

Quick specs

Shipping Weight
0.098 kg
Shipping Dimensions
11 × 8 × 4 cm
See all specifications