Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This industrial USB to RS485 converter uses the original CH340C chipset for reliable bidirectional serial communication. It features 15KV ESD protection, TVS diodes, and an onboard 120Ω resistor for stable data transmission in harsh environments.

Key Highlights

  • Original CH340C chipset for dependable USB to RS485 conversion
  • Bidirectional data flow with baud rates from 300 bps to 3 Mbps
  • 15KV ESD protection and TVS diodes for voltage spike suppression
  • Onboard 120Ω balancing resistor for proper line termination
  • USB-A interface and screw terminals for A+, B-, and GND
  • Compact 70 x 25 x 17 mm module operating from -15°C to 70°C

Ideal For

  • Industrial automation engineers
  • Data acquisition and monitoring technicians
  • Building management system integrators
  • SCADA system developers
  • Embedded system hobbyists and professionals

Buying Tip

Verify that your target RS485 devices use standard A+ and B- polarity and that your host system supports the CH340C chipset before purchase.

Elecvora expert review

Our verdict

The SmartElex USB to RS485 converter offers a solid, no-frills solution for industrial serial communication. Its original CH340C chipset and built-in protection features make it a dependable choice for engineers who need a compact and robust interface.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Original CH340C chipset for reliable performance
  • 15KV ESD protection and TVS diodes enhance durability
  • Onboard 120Ω resistor simplifies termination
  • Wide baud rate range from 300 bps to 3 Mbps

Cons

  • Requires correct wiring of A+ and B- terminals
  • No USB cable included, only the converter
  • Limited to 5V operation from USB port

Best for

Industrial automation and data acquisition professionals

Not ideal for

Hobbyists needing a ready-to-use cable assembly

Specifications

Item TypeProgrammer Module
Based OnUSB TO RS485
Voltage Rating (V)5.0
USB TypeA
ChipsetCH340C
Baud Rate (bps)300 bps to 3 Mbps
Operating Temperature (°C)-15 to 70
Maximum Output Current (A)500mA
Length (mm)70
Width (mm)25
Height (mm)17
Operating humidity5 RH to 95 RH
Shipping Weight0.02 kg
Shipping Dimensions10 × 10 × 3 cm

What's in the box

  • 1 x SmartElex Industrial USB TO RS485 Bidirectional Converter, Onboard original CH340C

Frequently Asked Questions

What is the maximum baud rate supported?
The converter supports baud rates from 300 bps up to 3 Mbps.
Does this converter require external power?
No, it is powered directly from the USB port with a 5V rating and draws up to 500mA.
What is the purpose of the onboard 120Ω resistor?
It provides proper line termination for RS485 networks, helping to reduce signal reflections.
Can I use this with a 3.3V system?
The converter is rated for 5V operation; however, the RS485 side may be compatible with 3.3V logic if the connected device supports it. Always check voltage compatibility.
What is included in the package?
The package includes one SmartElex Industrial USB to RS485 Bidirectional Converter with onboard original CH340C.
What is the operating temperature range?
The converter operates reliably from -15°C to 70°C.

Overview

The SmartElex Industrial USB to RS485 Bidirectional Converter is a compact, robust module that bridges USB and RS485 networks. Built around the original CH340C chipset, it provides reliable bidirectional data transfer between a computer and RS485 devices. The board is designed for industrial environments, featuring 15KV ESD protection, TVS diodes for voltage spike suppression, and an onboard 120Ω balancing resistor to ensure stable communication over long cable runs.

Key Features

  • Original CH340C chipset for consistent USB to RS485 conversion
  • USB-A interface for easy connection to standard ports
  • Screw terminals for A+, B-, and GND wiring
  • Wide baud rate range from 300 bps to 3 Mbps
  • 15KV ESD protection and TVS diodes for durability
  • Onboard 120Ω resistor for proper line termination
  • Compact dimensions of 70 x 25 x 17 mm

Specifications Explained

The 5.0V voltage rating and 500mA maximum output current make this converter suitable for powering small RS485 devices directly from the USB bus. The wide baud rate range supports both low-speed legacy equipment and higher-speed data links. With an operating temperature range of -15°C to 70°C and humidity tolerance from 5% to 95% RH, it can be used in a variety of indoor industrial settings. The USB transmission distance is up to 5 meters, while RS485 communication can reach up to 1.2 km at lower baud rates, enabling remote device connectivity.

Compatibility and Requirements

This converter requires a host device with a USB-A port and an operating system that supports the CH340C chipset. It is designed for RS485 networks using A+, B-, and GND connections. No additional drivers are mentioned in the product data, but the CH340C is widely recognized. Ensure correct wiring of the RS485 terminals to prevent communication errors.

Typical Uses

  • Industrial automation systems
  • Data acquisition and monitoring
  • Building management systems
  • SCADA systems
  • Embedded system communication

What's in the Box

1 x SmartElex Industrial USB TO RS485 Bidirectional Converter with onboard original CH340C.

Quick specs

Item Type
Programmer Module
Based On
USB TO RS485
Voltage Rating (V)
5.0
USB Type
A
Chipset
CH340C
Baud Rate (bps)
300 bps to 3 Mbps
See all specifications