
1 / 3 · Click to enlarge
At a glance
Made by SmartElex, this smartelex programmer modules is a good fit for makers, students and electronics hobbyists. Main specs: item type USB To UART Communication Module; based on Prolific PL2303 chipset; usb type USB 1.1, USB CDC v1.1. Check that your power source supplies -0.3 to VDD+0.3 before connecting it.
Key Highlights
- Item Type: USB To UART Communication Module
- Based On: Prolific PL2303 chipset
- USB Type: USB 1.1, USB CDC v1.1
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | USB To UART Communication Module |
|---|---|
| Based On | Prolific PL2303 chipset |
| USB Type | USB 1.1, USB CDC v1.1 |
| Connector Type | USB Type-A Male |
| Input Voltage (V) | -0.3 to VDD+0.3 |
| Output Voltage | -0.3 to VDD+0.3 |
| Operating Voltage (V) | 4.75 to 5.25 |
| Length (mm) | 56 |
| Width (mm) | 22 |
| Weight (g) | 06 |
| Shipping Weight | 0.012 kg |
| Shipping Dimensions | 7 × 5 × 3 cm |
Overview
The SmartElex PL2303 USB To UART Communication Module, made by SmartElex, is listed in our smartelex programmer modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: USB To UART Communication Module
- Based On: Prolific PL2303 chipset (look up this chip to confirm it runs the firmware or libraries you plan to use)
- USB Type: USB 1.1, USB CDC v1.1
- Connector Type: USB Type-A Male (confirm your cable or board uses the same connector)
- Input Voltage (V): -0.3 to VDD+0.3 (match this to your power supply; too high a voltage can damage the part)
- Output Voltage: -0.3 to VDD+0.3 (match this to your power supply; too high a voltage can damage the part)
- Operating Voltage (V): 4.75 to 5.25 (match this to your power supply; too high a voltage can damage the part)
- Length (mm): 56 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The SmartElex PL2303 USB to UART (TTL) Module is a compact, easy-to-use USB-to-serial converter designed to interface microcontrollers and other TTL-level serial devices with your PC. Built around the reliable Prolific PL2303 chipset, this module supports both 3.3V and 5V logic levels (jumper-selectable) and includes TXD, RXD, VCC, and GND pins for quick connection.
With built-in LED indicators for power, transmit, and receive, it simplifies debugging and firmware uploads. USB To UART Communication Module supports a wide range of operating systems including Windows, Linux, and Mac OS. Ideal for makers, developers, and engineers needing a stable serial interface.
Note: Refer to datasheet in the ATTACHMENTS section for more info. regd. the product.Features:
- Based on the trusted Prolific PL2303 chipset
- Converts USB to 3.3V/5V TTL serial signals
- Standard USB Type-A connector for easy PC interfacing
- Jumper-selectable output voltage: 3.3V or 5V
- 4-pin header: TXD, RXD, VCC, and GND
- Onboard LEDs for PWR, TX, and RX activity
- Full USB 1.1 & USB CDC v1.1 compliance
- Compatible with Windows, Linux, and macOS
Package Includes:
1 x SmartElex PL2303 USB To UART Communication ModuleQuick specs
- Item Type
- USB To UART Communication Module
- Based On
- Prolific PL2303 chipset
- USB Type
- USB 1.1, USB CDC v1.1
- Connector Type
- USB Type-A Male
- Input Voltage (V)
- -0.3 to VDD+0.3
- Output Voltage
- -0.3 to VDD+0.3
















